Download as docx, pdf, or txt
Download as docx, pdf, or txt
You are on page 1of 5

4000LPM AT 45 M HEAD PUMP TECHNICAL

SPECIFICATIONS:Pump Type:- Vertical Turbine Pump,


Pump Make:- MALHAR,
Pump Model :- VT-10,
Noninal Size :- 8 x 8,
Discharge Flowrate: 4000 lpm,
Discharge Head :- 45 m,
No of Stages:- 9,
Bowl O.D. :- 242 MM,
Column Assembly :(a) Column Pipe size : 8 flange type,
(b) Shaft Size :- 11/2 ,
(c) Type of lubrication :- Water,
(d) Column Assembly Length :- As per Requirement at
(e) 1.5 m each --------------Extra Price
Bowl Assemble Length :- 2791 mm (Approx),
Maximum Bow assembly Input HP :- 52.56 hp,
HP Of Motor x RPM :- 60 HP X 1440 RPM,
Type of Drive :- Vertical Hollow Shaft

TOTAL PUMP SET COST :- RS 6,46,450


/-Each

2000LPM AT 45 M HEAD PUMP TECHNICAL


SPECIFICATIONS:Pump Type:- Vertical Turbine Pump,
Pump Make:- MALHAR,
Pump Model :- VT-10,
Noninal Size :- 6 x 6,

Discharge Flowrate: 2000 lpm,


Discharge Head :- 45 m,
No of Stages:- 6,
Bowl O.D. :- 242 MM,
Column Assembly :(a) Column Pipe size : 6 flange type,
(b) Shaft Size :- 1 ,
(c) Type of lubrication :- Water,
(d) Column Assembly Length :- As per Requirement at
(e) 1.5 m each --------------Extra Price
Bowl Assemble Length :- 2152 mm (Approx),
Maximum Bow assembly Input HP :- 26.63 hp,
HP Of Motor x RPM :- 30 HP X 1440 RPM,
Type of Drive :- Vertical Hollow Shaft

TOTAL PUMP SET COST :- RS 4,22,050/-Each

MATERIAL OF CONSTRUCTION :1.


(i)
(ii)
(iii)

Bowl Assembly:
Bowl
Impeller
Impeller shaft

: Gray C.I Grade-FG200 of IS 210


: Gray C.I Grade-FG200 of IS 210 Dynamically Balanced.
: Stainless steel SS Fr CA-15 (SS410) SS Grade AISI 410
The surface is grounded to 0.75 microns.
(iv) Suction Case & Discharge Case :- Gray CI confirming to grade FG 200 OF IS 210
(iv) Bowl Bearing, Suction Case bearing Discharge case
Bearing & Impeller seal Ring: Bronze
(vi) Strainer
: Conical fabricated from M.S
wire-rods.
Column Assembly :(i) Column pipe
: ERW M.S pipe confirming to
IS 1239 Part II heavy series or
1978-1971 Column pipe have flange connection

(ii) Line shaft


: EN 8(iii) Line s
haft Coupling : EN 8
(IV) Line Shaft Sleeve : S.S.
Grade AISI 410
(v) Spider
: Flange Type Spider C.I.
Grade 200 IS 210 (vi) Line Shaft Bearing : Made of
neoprene. Shore hard ness 70 to 75
2.
Discharge Head
Assembly:
(i) Discharge head Body : Gray C.I Grade FG
200 OF IS 210(ii)
Stuffing Box
: Gray
C.I Grade FG 200 OF IS210
(iii) Stuffing Box Guide Bush : Bronze
(iv) Gland nut
: Bronze
v) Lantern Ring & Rain forcemeat Ring : Bronze
(vi) Gland Packing

: Graphite

(vii) Stuffing Box Bearing : Made of


neoprene rubber. shore hard ness 70 to
75(viii) Discharge head shaft : Stainless Steel SS Fr CA 15 (SS 410
)
Vertical Turbine Pumps are confirming to I.S. Specification 1710. Th
e pump will be
supplied with standard Tools required for installation as detailed here
under.
(1)

Column pipe clamps

: 2 No.

(2)

Line Shaft Clamps

: 2 No.

(3)

Gland nut Spanner

: 1 No.

Scope of supply :- Vertical Turbine pump with CI Impeller as


per Annexure A / A1, Extra Column assembly 8" x 1 1 /2 " & 6"
X 1" water lubricated flange type 1.5 m long with ertical hollow
shaft Electrical motor suitable for 415 volt 50 Hz , AC Supply

TERMS AND CONDITIONS :TAX :- @ 5 % VAT Extra or 2% cst extra against "C" FORM on
above price OR 15% VAT Extra
Excise /GST : not applicable at present , if applicable at the time
of supply will be charged extra
F O R :- Ex-our works, Ahmedabad on Freight TO PAY basis
P & F :- @ 3% Extra on above price , however in big pumps it will
be extra at actuals .
Payment :- 40% Advance , balance against proforma invoice.
DELIVERY :- Within 04 TO 05 MONTHS after receipt of your
clear written purchase order along with advance
VALIDITY :- 30 Days from offer date
Delivery charges :- to pay basis
Inspection and other charges extra as actual.

Priyanka Gajjar

CREATIVE ENGINEERS
*( makers of malhar pumps , An ISO 9001 company and
having CE mark )*
*1st floor ,above Bhairavnath post office ,*
*OPP pragati society ,Maninagar ,*
*Ahmedabad 380 028 INDIA

PHONE 0091 79-25431453 * mob: +918140179903


Email
Id:- exports@sspumpsindia.com , info@sspumpsindia.com ,malharp
ump@gmail.com
*web site : www.sspumpsindia.com / www.lpgpumps.com*
DOWNLOAD APP OF "MA,LHAR PUMPS" ON YOUR
ANDROID FOR COMPLETE CATALOG

You might also like