This document provides specifications for designing a staircase between landing beams, including riser height of 160mm, tread length of 300mm, 12 steps, landing beam width of 400mm, concrete grade of 20MPa, effective span of 4000mm, waist slab thickness of 200mm, and dead and live loads. Based on the given parameters and load calculations, it determines the required bending moment of 39.802kNm, waist slab depth of 120.088mm, main reinforcement as 12mm bars at 160mm centers totaling 690.404mm2, and distribution reinforcement as 8mm bars at 200mm centers totaling 240mm2.
This document provides specifications for designing a staircase between landing beams, including riser height of 160mm, tread length of 300mm, 12 steps, landing beam width of 400mm, concrete grade of 20MPa, effective span of 4000mm, waist slab thickness of 200mm, and dead and live loads. Based on the given parameters and load calculations, it determines the required bending moment of 39.802kNm, waist slab depth of 120.088mm, main reinforcement as 12mm bars at 160mm centers totaling 690.404mm2, and distribution reinforcement as 8mm bars at 200mm centers totaling 240mm2.
This document provides specifications for designing a staircase between landing beams, including riser height of 160mm, tread length of 300mm, 12 steps, landing beam width of 400mm, concrete grade of 20MPa, effective span of 4000mm, waist slab thickness of 200mm, and dead and live loads. Based on the given parameters and load calculations, it determines the required bending moment of 39.802kNm, waist slab depth of 120.088mm, main reinforcement as 12mm bars at 160mm centers totaling 690.404mm2, and distribution reinforcement as 8mm bars at 200mm centers totaling 240mm2.
DESIGN OF STAIRCASE (SPANNING BETWEEN LANDING BEAMS)
Enter the riser value
Riser 160 mm Enter the length of tread Tread 300 mm Enter the number of steps in the flight 12 No. of steps in flight INPUT Enter the width of landing beams Width of landing beams 400 mm Grade of concrete 20 N/mm Enter the value of fck in N/mm Grade of steel 415 N/mm Enter the value of fy in N/mm Effective span 4000 mm Effective span Thickness of waist slab 200 mm Dead load on slab (slope) 5 kN/m Dead load on slab (horizontal span) 5.667 kN/m Dead load on one step 0.6 kN/m Load of steps/m length 2 kN/m Loads Finishes 0.6 kN/m Total Dead load 8.267 kN/m Live load 5 kN/m Total service load 13.267 kN/m Total ultimate load 19.901 kN/m Bending moments Maximum BM at centre of span 39.802 kNm Depth of waist slab 120.088 mm Cover 20 mm Check for depth Enter the diameter of main reinforcements Diameter of reinforcing bars 12 mm Effective depth 174 mm Main reinforcement Area of steel reinforcements 690.404 mm Provide 12 mm bars at 160 mm c/c Distribution reinforcement Area of distribution reinforcement 240 mm Provide 8 mm bars at 200 mm c/c NOTE: