Specialty Polymer Coatings, Inc. supplied approximately 126,000 litres of their SP-2888 liquid epoxy brush grade coating and 20,500 litres of their SP-3888 spray grade coating to the Alliance Pipeline Project. The coatings were applied to girth welds on 594 miles of 36-inch pipeline in the US and 495 miles of 36-inch and 42-inch pipeline in Canada, totaling 60% of the girth weld coating for the project. The company thanked the Alliance team and pipeline contractors for their support on this large project.
Specialty Polymer Coatings, Inc. supplied approximately 126,000 litres of their SP-2888 liquid epoxy brush grade coating and 20,500 litres of their SP-3888 spray grade coating to the Alliance Pipeline Project. The coatings were applied to girth welds on 594 miles of 36-inch pipeline in the US and 495 miles of 36-inch and 42-inch pipeline in Canada, totaling 60% of the girth weld coating for the project. The company thanked the Alliance team and pipeline contractors for their support on this large project.
Specialty Polymer Coatings, Inc. supplied approximately 126,000 litres of their SP-2888 liquid epoxy brush grade coating and 20,500 litres of their SP-3888 spray grade coating to the Alliance Pipeline Project. The coatings were applied to girth welds on 594 miles of 36-inch pipeline in the US and 495 miles of 36-inch and 42-inch pipeline in Canada, totaling 60% of the girth weld coating for the project. The company thanked the Alliance team and pipeline contractors for their support on this large project.
Specialty Polymer Coatings, Inc. supplied approximately 126,000 litres of their SP-2888 liquid epoxy brush grade coating and 20,500 litres of their SP-3888 spray grade coating to the Alliance Pipeline Project. The coatings were applied to girth welds on 594 miles of 36-inch pipeline in the US and 495 miles of 36-inch and 42-inch pipeline in Canada, totaling 60% of the girth weld coating for the project. The company thanked the Alliance team and pipeline contractors for their support on this large project.
(SPC) is proud to announce that it has supplied approx 126,000 litres of SP-2888 R.G. liquid epoxy brush grade coating to the Alliance Pipeline Project. The coating was applied in a single application at a minimum dry film thickness of 20 mils (1000 microns) to the girth welds on 594 miles (956 kilometers) of 36 diameter pipeline in the United States and 495 miles (797 kilometers) of 36 and 42 diameter pipeline in Canada. This constitutes 60% of the girth weld coating for this project. In addition, 20,500 litres of SP-3888 spray grade was used to coat valves, hot bends and slip bores for this prestigious project. On behalf of all of the employees at SPC, I would like to thank the entire Alliance team and all of the pipeline contractors for their support thoughout the construction of this enormous undertaking.