Professional Documents
Culture Documents
Environmental and Water Quality Monitoring Buoy - Suhaili Specification
Environmental and Water Quality Monitoring Buoy - Suhaili Specification
7)
8)
Output: 0-1 V
Power supply: 10-14 Vdc
Power consumption: 0.25W
Uncertainty: 1hPa
Global horizontal irradiance unshaded, at 1m or 2m height
Principal: Thermopile
ISO 9060 Classification: Second class
Spectral range: 305-2800 nm
Uncertainty ( Daily totals) : 10%
Response time: 30S
Operative Temperature: -40-80oC
Output: uV/W/m2
Maximum irradiance: 2000W/m2
Global horizontal albedo unshaded, at 1m or 2m height
Principal: Thermopile
ISO 9060 Classification: Second class
Spectral range: 305-2800 nm
Uncertainty ( Daily totals) : 10%
Response time: 30S
Operative Temperature: -40-80oC
Output: uV/W/m2
Maximum irradiance: 2000W/m2
9)
Water velocity/current depth 0.5 -1m - IS IT NESSECARY?
10) Wave height and direction or buoy tilt angle sensor
Water quality sensor
Protection Class: IP68 ( Permanent Immersion)
Immersion Depth: Min 75mm Max 100M
Operating Temperature: -5oC + 70oC
Dimension (L x Dia) : 290mm x 42mm
Weight: 700g
1)
pH level
Range: 0-14pH /+/- 625mV
Resolution: 0.01pH / +/- 0.1mV
Accuracy: +/- pH/ +/-5mV
2)
Dissolved oxygen
Range: 0-500.0% / 0 -50.00 mg/L
Resolution: 0.1% / 0.01 mg/L
Accuracy: 0-200%:+/- 1 % of reading , 200%-500%: +/- 10%
3)
Conductivity
Range: 200mS/cm (0-200,000S/cm)
Resolution: 3 auto range scales: 0-9999S/cm, 10.00-99.99 mS/cm, 100.0
200.0 mS/cm
4)
Water temperature
Range: -5oC + 70oC
Resolution: 0.1oC/F
Accuracy: +/- 0.5oC
5)
Chlorophyll
Resolution: 0-500g/L (ppb)
Resolution: 2 auto range scales: 0.00-99.99g/L, 100.0-500.0 g/L
Repeatability: +/- 5% of reading
Type: Sink
I/O Mode: DO or Pulse Output
Pulse Output Frequency: 1 kHz
Over-voltage Protection: 45 VDC
Over-current Protection: 2.6 A (4 channels @ 650 mA)
Over-temperature Shutdown: 160C (min.)
Current Rating: 200 mA per channel
DIO Output Leakage Current: 3.6 mA @ 24 VDC
Power Requirements
Power Consumption:
Always on: 156 mA @ 24 VDC
On demand: 138 mA @ 24 VDC
MTBF (mean time between failure)
Time: 407,406 hrs
Database: Telcordia (Bellcore)
Computer
CPU: ARM9 based CPU, 32-bit/160 MHz
SDRAM/Flash:
ioLogik W5312/W5340: 4 MB / 2 MB
ioLogik W5348: 64 MB / 32 MB
Storage
Expansion Slot: Up to 32 GB SD memory card (SD 2.0 compatible)
Note: For units operating in extreme temperatures, industrial grade, widetemperature SD cards are required.
Cellular
Network:
ioLogik W5312/W5340:
Quad-band GSM/GPRS/EDGE 850/900/1800/1900 MHz
ioLogik W5340-HSDPA/W5348-HSDPA-C:
Tri-band UMTS/HSDPA 850/1900/2100 MHz
Quad-band GSM/GPRS/EDGE 850/900/1800/1900 MHz
Internet:
HSDPA:
Up to 3.6M bps upload speed.
Up to 384k bps download speed.
UMTS:
Up to 384k bps upload/download speed.
GPRS/EDGE:
Multi-slot class: Class 10
Coding schemes: CS 1-4, MCS 1-9
Terminal device class: Class B
TYPE
System voltage
Float charge
Boost charge
Equalization
Deep discharge protection:
State of charge dependent
Voltage dependent
Reconnect level
Overvoltage protection
Undervoltage protection
Max. panel voltage
(Overvoltage protection by
varistor)
CML 20A
12/24 V auto recognition
13.7/27.4 V (25 C)
14.4 /28.8 V (25 C), 2 Std.
activation: battery voltage
<12.3/24.6 V
14.8/29.6 V (25 C), 2 Std.
activation: battery voltage
<12.1/24.2 V
11.4 11.9 V / 22.8 23.8 V
11.0/22.0 V
12.8/25.6 V
15.5/31.0 V
10.5/21.0 V
30 V in 12 V system
50 V in 24 V system
Temperature compensation
(Charge voltage)
Max. self consumption
Grounding
Ambient temperature
Max. height
Battery type
Wire cross section
Weight
Dimensions (W xH x D)
Type of protection
3. Solar battery
100Ah, 12 Vdc
Specification
Rated capacity
Nominal voltage
Cells per unit
Design life span
Warranty
Manufactured
Brand
Series
100Ah
12V
6
10 Years
1 Year
China
POWERBATT
PK Series
25 mV/K at 12V
50 mV/K at 24V
< 4 mA
positive grounding possible
40 to +50 C
4,000 m above sea level
lead acid (GEL, AGM, flooded)
< 16 mm2
160 g
80 x 100 x 32 mm
IP22