Professional Documents
Culture Documents
Yamaha CLP-470 - 440 - 430 - S408 - S406 - 465GP Owner's Manual
Yamaha CLP-470 - 440 - 430 - S408 - S406 - 465GP Owner's Manual
Remove all parts from the package and make sure you have all of the items.
*This illustration shows model CLP-440.
Assembly parts
6 x 20 mm long screws x 4
6 x 16 mm short screws x 6
Foamed styrol pads
Remove foamed styrol pads from the package, position them on
the floor, then place A on top of them.
Position the pads so that they will not hide the connectors on the
bottom of A.
4 x 12 mm thin screws x 2
4 x 20 mm tapping screws x 4
B
Cord holders x 2
C
A bundled pedal cord is attached to the reverse side.
Headphone hanger
4 x 10 mm thin screws x 2
Headphone hanger
Power cord
Appendix
Assembling the Clavinova
73
1.
3.
Attach C to D and E.
1-1
1-2
Mount A.
Be sure to place your hands at least 15 cm from
either end of the main unit when positioning it.
Align the
screw holes
1-2
C
15 cm or further in
CAUTION
Be extra careful not to drop or let your fingers be pinched by the
main unit.
CAUTION
1-1
2.
Do not hold the main unit in any position other than the position
specified above
Attach B.
Depending on the model of instrument you
purchased, the surface color of one side of B
may be different from the other side. In this
case, position B so that the side of the surface
color most similar to D and E faces the player.
2-1
4.
Secure A.
4-1
4-2
2-2
2-3
E
B
D
4-2
2-2
74
Appendix
Assembling the Clavinova
5.
6-2
5-1
5-2
5-3
7.
5-1
8.
5-3
5-2
6-2
110
127
220
6-1
DA
PE
6.
6-1
240
Voltage Selector
Before connecting the AC power cord, check the setting of the
voltage selector which is provided in some areas. To set the
selector for 110V, 127V, 220V or 240V main voltages, use a
minus screwdriver to rotate the selector dial so that the
correct voltage for your region appears next to the pointer on
the panel. The voltage selector is set at 240V when the unit is
initially shipped. After the proper voltage has been selected,
connect the AC power cord to the AC IN and an AC wall
outlet. A plug adaptor may be also provided in some areas to
match the pin configuration of the AC wall outlets in your area.
WARNING
An improper voltage setting can cause serious damage to
the instrument or result in improper operation.
Appendix
Assembling the Clavinova
75