EZ-1 sHRTOSE
unplug the electrode protective sleeve before
use.
2, Press the switch place the electrode into the test
solution.
3, After the numerically stable,press the HOLD button and
take it out ofthe solution to read.
4, After reading.tum off the meter.wipe clean the electrode
+ Lock Function;easy to read and record,the instrument will
lock the reading
2. Seminute auto shut off feature,battery won't run off
3. Measurement Range:Conduciivty:0-9880us/om
‘TDS:0-9980ppm
Degrees Celsius:0.1-80.0°C
F:92,0-176.0 °F
Accuracy:t2% NW.:889 —Size:154X30X14(mm)
‘The tactory default TDS data.if the conductivity data of the
solution is needed,please touch the SHIFT button.the
instrument automatically shifted.
“The instrument with automatic temperature compensation
function under measurement mode.
EZ-1 ERTOSE ECS
Continuous touch the SHIFT button twice,degrees Celsius
and degrees Fahrenheit conversed.the factory default
degrees Celsius
Keep the electrode clean.cover the electrode protective
sleeve.please take out the batteries for long periods idle.
Product warranty life time from the date of purchase, The
following situations are not in the range of warranty,damage
caused by misemploy (battery leakage,water into circuit
boards etc. physical abuse,the label tore.
41, The instrument is a professional instrument please under
professionals instructions in order to avoid instrument
failure.
2s Avoid heat. direct sunlight.
3, Please adopting standard buffer solution
calibraion incorrect calibration would cause measurement
error, thus affecting the accuracy of the test solution or
cause the instrument ont working properly.
4, Do not thrown the instrument into the test solution to avoid
the circuit board short circuit,