Professional Documents
Culture Documents
J1251en07 PDF
J1251en07 PDF
J1251en07 PDF
Service Regulator
Inlet Pressure up to 8.6 bar
Nominal Diameter & 1
Applications
- Industrial
- Commercial
- Residential
Brief information
Main features
Operation: The J125 series provides a full range of regulators for service applications
where accurate pressure control is required. The units are ideal for industrial pressure
reducing, metering stations and for district distribution. The regulators are designed to
maintain high accuracy and efficiency over the inlet pressure range of 70mb - 8.6bar
(1-125 PSIG). The and 1" sizes are available with screwed connections.
Several orifices are available to cover the full inlet pressure range, together with a
comprehensive number of outlet pressure springs.
The unit has been designed for ease of installation and servicing in confined areas. The
diaphragm case can be fully rotated and, during inspection and servicing, the case can
be removed without disturbing the pipework.
The J125 can be fitted with a full or limited capacity relief valve. It is recommended that the
regulator be fitted with the Elster Jeavons Universal Safety Shut-off Assembly (USSA). This
provides over pressure and/or under pressure protection with immediate shut-off at the
regulator inlet. It uses well proven principles to give exceptional consistency of operation
and an unrivalled insensitivity to nuisance tripping.
Sizes x & 1 x 1
(for 1 & 2 see separate leaflet)
Application: All units are suitable for operation on natural, liquefied petroleum and
manufactured gases. Various versions of this regulator comply with the requirements of
BGC/PS/E26, IGE/TD/10, Danish DGP, BS3016 and numerous international specifications.
The USSA unit is designed to meet the requirements of the standards BS EN 14382,
BGES/V9 and TN02.
Technical Data:
Maximum inlet pressure:
140mbar (64wg)
OPSS range:
UPSS range:
8 - 150mbar (3 60 wg)
Approval: The and 1 J125 have been approved to Modulus B + D of the PED 97/23/EC
by BSI (Notified Body No. 0086). It is classified as Category IV equipment and a pressure
accessory.
Servicing: The J125 has been designed for ease of access, inspection and servicing of all
internal components. A standard soft spares kit is available for all sizes.
J125-S1 & S3
J125-S2
J125-S4, S6 & S8
Options
Full or limited relief valve
Dimensions
Regulator Springs
mbar
wg
Part Number
Colour Code
5 - 15
2-6
J12506-041
Lt Green / Yellow
12 25
4.8 10
J12506-042
Lt Green / Black
22 35
8.8 14
J12506-043
Lt Green / Orange
32 - 50
12.8 20
J12506-044
Lt Green / Brown
45 - 75
18 30
J12506-045
Lt Green / Red
72 - 140
29 - 56
J12506-046
mbar
wg
Part Number
Colour Code
J125 S1/S2/S3
OPSS Springs
18 60
7.5 - 24
J12506-281
Black
50 - 80
20 - 32
J12506-282
Orange
60 - 110
24 - 44
J12506-283
Red
100 - 210
40 - 84
J12506-284
Dark Green
200 - 350
3 5 PSI
J12506-287
Yellow
280 - 500
4 7 PSI
J12506-288
White
mbar
wg
Part Number
Colour Code
8 - 16
3-6
J12506-285
Light Blue
16 - 60
6 - 24
J12506-286
Brown
60 - 150
24 - 60
J12506-289
Purple
J125 S4 S14
UPSS Springs
Schematic Installation
J125 Versions
The following table indicates the code numbers of the various J125 versions available.
TYPE
J125-S1
J125-S2
J125-S3
J125-S4
J125-S5
J125-S6
J125-S7
J125-S8
J125-S9
J125-S10
J125-S11
J125-S12
J125-S13
J125-S14
Full Capacity
Relief (FR)
Limited
Capacity
Relief (LR)
Over Pressure
Slam Shut
(OPSS)
Under
Pressure Slam
Shut (UPSS)
Safety
Diaphragm
Screwed
Flanged
1.8
1.8
4.5
4.5
1.8
2.3
2.3
4.5
5.0
5.0
2.3
2.3
2.3
5.0
5.0
5.0
2.3
2.3
2.3
5.0
5.0
5.0
2.3
2.3
2.3
5.0
5.0
5.0
Regulating Capacities
All capacities in SCMH 0.64 s.g. Droop = 20%
3.5mm Orifice
Spring Range (mbar)
5 - 15
12 - 25
22 - 35
32 - 50
45 - 75
72 - 140
10
20
30
40
60
100
6.2
8.4
11.7
15.5
16.7
18.5
22.0
25.6
28.8
33.1
36.5
43.9
51.3
58.5
65.7
5.5
7.7
10.9
13.7
16.5
18.4
20.7
25.3
28.3
32.1
36.0
43.9
51.3
58.5
65.7
5.7
9.1
12.0
14.1
15.7
17.8
20.5
24.7
27.8
31.3
34.9
44.0
51.4
58.2
65.7
6.2
9.7
12.4
14.0
15.6
17.3
20.4
23.9
27.9
30.9
34.5
44.1
51.5
58.3
65.7
5.9
9.7
12.5
14.0
15.6
17.3
20.3
23.9
27.6
30.9
34.5
44.1
51.2
58.4
65.7
5.6
8.9
11.9
14.8
16.5
18.1
21.7
24.6
28.3
31.9
35.5
42.8
51.1
58.5
65.8
8.3
18.3
25.1
28.4
32.8
36.7
43.6
50.9
59.1
66.3
72.4
85.8
9.9
16.8
23.0
28.9
32.4
36.5
43.6
50.3
57.6
64.9
71.9
85.8
10.0
17.4
23.4
28.5
32.4
35.5
42.7
49.9
57.1
63.7
71.6
85.8
10.0
15.7
21.2
28.6
32.6
35.9
42.7
50.2
58.0
65.1
72.6
85.8
10.4
16.1
22.8
27.2
32.6
36.4
42.8
51.2
58.2
65.1
72.0
85.9
9.3
15.3
19.2
26.1
30.7
34.6
41.5
49.7
57.4
64.3
72.9
85.9
13.6
15.5
36.6
52.6
63.5
75.7
81.2
105.3
118.4
12.8
21.2
38.4
53.4
62.1
72.4
78.4
92.1
111.9
12.1
21.0
38.4
51.9
62.5
77.3
87.2
103.6
121.7
11.3
21.2
35.8
49.4
62.9
73.1
84.0
104.2
120.7
9.4
21.0
34.7
49.4
63.9
76.4
83.9
100.3
116.8
14.9
29.2
40.2
47.5
55.9
65.8
84.5
108.2
13.3
14.4
25.6
43.9
62.1
76.8
91.4
102.4
113.5
8.4
13.7
25.6
43.9
62.8
82.3
95.0
105.3
113.5
6.9
12.9
27.4
45.4
65.6
81.5
93.6
106.7
117.8
11.9
26.3
43.9
62.1
76.8
91.0
107.8
115.2
9.8
25.6
42.0
62.5
73.1
87.7
104.1
115.2
21.9
34.7
53.0
73.1
89.6
94.9
104.2
5mm Orifice
250
500
750
1000
1250
1500
2000
2500
3000
3500
4000
5000
8mm Orifice
100
250
500
750
1000
1250
1500
2000
2500
10mm Orifice
50
100
250
500
750
1000
1250
1500
1700
Relief Valve
Orifice 10
160
140
120
100
80
60
40
20
Orifice 8
Orifice 5
Orifice 3.5
Orifice Sizes
Orifice Size (mm)
3.5
10
Material Specifications
A summary of the material specification for the J125 is given for reference. All material has been selected to provide maximum durability and reliability in service.
Components
Specification
Regulator Body
Valve Seat
Brass BS EN 12164
Regulator Diaphragm
Acetal Resin
Lever Arm, Regulator Diaphragm Plate, Vent Valve Plates, Clamping Plate
Springs
Quality:
Elster Jeavons is committed to a programme of continuous quality enhancement. All equipment designed and manufactured by
the Elster-Instromet group benefits from the groups quality assurance standards which are approved to EN ISO 9001:2008.
Your contacts
United Kingdom
Elster Metering Ltd.
Paton Drive, Tollgate Business Park,
Beaconside, Stafford, Staffs. ST16 3EF
T +44 1785 275200
F +44 1785 275305
www.elster-instromet.com
stafford.enquiries@elster.com
J1251EN07
A04.08.2015
Germany
Elster GmbH
Steinern Str. 19 - 21
55252 Mainz-Kastel
T +49 6134 605 0
F +49 6134 605 223
www.elster-instromet.com
info@elster-instromet.com
USA
Elster American Meter
2221 Industrial Road
Nebraska City, NE 68410-6889
T +1 402 873 8200
F +1 402 873 7616
www.elster-meterservices.com
Copyright 2015 Elster GmbH
All rights reserved
Subject to change without prior notice