Professional Documents
Culture Documents
Características Aleación 6061
Características Aleación 6061
Chemical Properties
% Value
Silicon (Si)
0,00 - 0,25
Chromium (Cr)
0,05 - 0,20
Manganese (Mn)
0,50 - 1,00
Magnesium (Mg)
4,70 - 5,50
Copper (Cu)
0,00 - 0,10
Titanium (Ti)
0,00 - 0,20
Iron (Fe)
0,00 - 0,40
Zinc (Zn)
0,00 - 0,25
Aluminium (Al)
Balance
Physical Properties
Value
Density
2,66 g/cm
Melting Point
Thermal Expansion
568 C
23.9 x 10^-6 /K
Modulus of Elasticity
Thermal Conductivity
Electrical Resistivity
69 GPa
120 W/m.K
%29 IACS
Mechanical Properties
Value
Proof Strength
250 MPa
Yield Strength
330 MPa
Elongation A50 mm
Modulus of Elasticity
%13
69 GPa
A medium strength aerospace aluminium alloy with, depending upon temper, Yield Strength of up to 35 ksi
(240 MPa) and Tensile Strength of 42 ksi (290 MPa)
ALLOY DESIGNATIONS
Aluminium alloy QQ-A-250/11, 6061 has s imilarities to the following standard designations and specifications ;
TEMPER TYPES
O - Soft
T4 - Solution heat treated and naturaly aged to a substantially stable condition
T42 - Solution heat treated and naturaly aged to a substantially stable condition
T451 - Solution heat treated then stress relieved by stretching. Equivalent to T4.
T6 - Solution heat treated and artificially aged
T62 - Solution heat treated then artificially aged by the user
T651 - Solution heat treated, stress relieved by stretching then artificially aged
SUPPLIED FORMS
Alloy QQ-A-250/11 is supplied in plate and sheet
Plate
Sheet