Professional Documents
Culture Documents
Avaya 6002-1
Avaya 6002-1
Avaya 6002-1
When troubleshooting a system fault, if the web interface or SAT are unavailable, which method
should be used?
A. SAL
B. TTY2
C. CLI
D. MODEM
Answer: C
Explanation:
QUESTION NO: 2
Which two series support RAID 5 configuration for CM6.0? (Choose two)
Answer: B,C
Explanation:
QUESTION NO: 3
Hunt group number 99, with group extension 4199, is administered for messaging.
Which command needs to be executed at the SAT terminal to troubleshoot hunt group 99?
Answer: D
Explanation:
QUESTION NO: 4
What are three pieces of information that are needed to meet this requirement? (Choose three)
Answer: B,C,D
Explanation:
QUESTION NO: 5
Which three are tests that can be performed to Verify a communication manager Messaging 6.0
application is working properly? (Choose three)
Answer: A,C,E
Explanation:
QUESTION NO: 6
On a media gateway G450, which slots are permitted for the MM 342?
A. V1 and V2
B. V6 and V6
C. V3 and V8
D. V5 and V7
QUESTION NO: 7
A. 4 GB RAM
B. 8 GB RAM
C. 12 GB RAM
D. 16 GB RAM
Answer: B
Explanation:
QUESTION NO: 8
Which screen is used while upgrading the system platform from release 6.0.0.09 to release
6.0.0.11?
Answer: C
Explanation:
QUESTION NO: 9
Answer: A,B,D
Explanation:
QUESTION NO: 10
A. Reset
B. Restart
C. Softboot
D. Nvram init
Answer: D
Explanation:
QUESTION NO: 11
A technician wants to test and see if the voice channel between two IP phones
Answer: A
Explanation:
QUESTION NO: 12
A. ETH0
B. ETH1
C. ETH2
D. ETH3
It seems like both answers could be correct as per following links, however the latest release says
ETH3.
http://support.avaya.com/css/P8/documents/100067099 (November 2009 Release)
http://support.avaya.com/css/P8/documents/100089493 (June 2010 Release)
QUESTION NO: 13
(Choose three)
A. Utility services
B. CM 6.0
C. Session manager
D. CMM 6.0
E. AES 6.0
Answer: A,B,C
Explanation:
QUESTION NO: 14
Which two tasks must be performed during the upgrade procedure? (Choose two)
Answer: A,C
QUESTION NO: 15
In the navigation pane, what are the steps to create a test mailbox on the Communication
manager messaging 6.0 Application?
A. Select messaging administration, then Subscribe Management, and then click Add or edit.
B. Select messaging administration, the click new.
C. Select messaging administration, Select messaging administration, and then click add.
D. Select Forms control, and then at the command line run then add subscribe command.
Answer: A
Explanation:
QUESTION NO: 16
When configuring a G450 Media gateway, which two port settings must be set? (Choose two)
A. FTP Server
B. 100 MB port speed
C. Auto-negotiation enabled
D. Full Duplex
Answer: B,D
Explanation:
QUESTION NO: 17
A switch administrator wants to busyout trunk 530for maintenance and administration work
however, there is one call active on port 5 of the trunk
Which command should be extended from SAT terminal to find out IP addresses and port of the
near-end and far-end node of the auto connection?
Answer: A
Explanation:
QUESTION NO: 18
Which three objects can be downloaded from the product license delivery system (PLDS)?
(Choose three)
A. Authentication file
B. Patches
C. Firmware updates
D. PuTTY
E. Communication manager templates
Answer: B,C,E
Explanation:
Authentication file will be downloaded fro RFA site. Unique authentication files are created
by the Authentication File System
(AFS), an online application at http://rfa.avaya.com.
QUESTION NO: 19
Which two statements describe the new procedures that a customer can use to directly and
permanently turn ON or OFF licensed features in CM 6.0? (Choose two)
A. Customers can turn features ON or OFF using the change system parameters customer-
options command on the system access terminal (SAT).
B. Customers can turn features ON or OFF using the system management interface features
administration page.
C. Customers can PDLS directly to turn futures ON or OFF and then download and install a new
license file with the updated features.
D. Customers can turn features ON or OFF using the WebLM server and the system platform
management Console
Answer: C,D
QUESTION NO: 20
Which statement describes the action to assure the CM_SurvRemoteEmbeded template was
installed correctly?
A. From a browser, using the communication manager IP address, successfully log into the
communication manager system management.
B. From a browser logged into communication Manager, Select administration > server
(Maintenance)> server>Process Status. Click on view.
C. From a browser logged into the system Management console verify cm, bsm, and utility_server
and application status is running
D. When monitoring the template installation workflow status, verify the message. Wizard
completed successfully displays.
Answer: C
Explanation:
QUESTION NO: 21
Which three statements about when communication manager release 6.0 is deployed as a feature
server are true? (Choose three)
Answer: A,C,D
Explanation:
QUESTION NO: 22
When using the Avaya Site administrator CEDI interface, which command would be used to check
the configuration of telephone set with the extension of 1000?
Answer: B
Explanation:
QUESTION NO: 23
Which three statements are true for a configuration that consists of Duplicated S8800 main
servers with a duplicated port network and is a survivable core? (Choose three)
Answer: A,B,E
Explanation:
QUESTION NO: 24
A technician has installed pair or duplication S8800 servers with IPSI duplication.
Which two procedures indicate that the duplicate IPSIs are both operated? (Choose two)
A. The enable operation of IPSI Duplication field on the display system-parameter duplication form
is set to y.
B. IPSI circuit packs have been installed slots 1 and 2 carrier A and one of the IPSI LEDs is
flashing.
C. Execution of the test IPserver-interface command for both IPSI circuit packs shows PASS in the
result column.
D. A paring test executed from the servers to the IPSIs and from the IPSIs to the servers returns
success for the active IPSI and failure for the standby IPSI.
Answer: A,C
Explanation:
Answer: C
Explanation:
QUESTION NO: 26
Which two statements are true regarding a media gateway full back (recovery) to main (primary)
servers? (Choose two)
A. All active (stable) Ip calls on the media gateway drop when the media gateway falls back from
the survivable remote server to the main server.
B. The list survivable-processor command can be used to confirm that the remote Survivable
server is registered to the main server and that the remote survivable server is no longer active.
C. When the main server recovers it issues registration requests to all the media gateways in the
network.
D. Executing the status media-gateways command from the main server will show which media
gateways are registered with the main server.
Answer: B,D
Explanation:
QUESTION NO: 27
To confirm that a survivable server is currently registered to the main CM servers, using the SAT.
Which command should be entered
Answer: D
QUESTION NO: 28
A customer wants to enable audio encryption for Ip phone calls, but the potion is not available on
any IP-codec-set.
A. From the SAT, type change system-parameter customer-options. Find the media Encryption
over IP field, and set the option to Y. Save the change
B. From the SMI Feature administration page, find the media Encryption over IP field Set the
option to Y. save the changes
C. From the system platform WebLM page. Find the media Encryption over IP field set the option
to Y. Save the changes.
D. From the Aura System Managers Feature Server Administration page. Find the media
encryption over IP field, and set the option to Y. save the changes.
Answer: A
Explanation:
QUESTION NO: 29
Which statement describes the action to assure the system platform was installed correctly?
A. From the laptop connected to the network, ping the dom0 IP address and verify a successful
response.
B. Immediately after the installation, verify the DVD is ejected from the drive and that the server
reboots.
C. After connecting the server using PuTTY and logging in as root, verify there are no errors when
running the xm list command.
D. From the system management console browser, verify domain-0 and cdom are running
Answer: C
Explanation:
QUESTION NO: 30
Answer: B
Explanation:
QUESTION NO: 31
System platform web console is used to apply the service pack for which three virtual machines?
(Choose three)
A. System platform
B. AES 6.0
C. Utility Server
D. Communication Manager 6.0
E. CMM 6.0
Answer: A,C,D
Explanation:
QUESTION NO: 32
Which procedure must be followed while, migrating from CM 5.2.1 (S8800 Server with 2 HDD) to
CM 6.0?
A. Insert 3rd hard drive, run raid CD, and than run raid CD after rebooting.
B. Take backup, store the backup locally, insert 3rd hard drive, and then run Raid CD after
rebooting.
C. Insert the raid CD, reboot the server, and than take backup.
D. Insert the hard drive and the 3rd hard drive is incorporated automatically.
Answer: B
Explanation:
A. add surviveable-processor
B. add survivable-processor ess <node-name>
C. add survivable-processor core
D. add survivable-processor <node-name>
Answer: D
Explanation:
QUESTION NO: 34
A. ETH0
B. ETH1
C. ETH2
D. ETH3
Answer: A
Explanation:
QUESTION NO: 35
When using the Avaya Site Administration GSDI interface, which command would be use to built a
new telephone set with the extension of 1000?
Answer: B
Explanation:
QUESTION NO: 36
A. Utility services
B. CM 6.0
C. Session manager 6.0
D. Avaya Enablement Services (AES)
Answer: A,B
Explanation:
QUESTION NO: 37
When using the Avaya Site Administrator GEDI interface, which command would be used to
confirm the media gateway number 3 is registered?
A. Show media-gateway 3
B. Display media-gateway 3
C. Print media-gateway 3
D. View media-gateway 3
Answer: B
Explanation:
QUESTION NO: 38
For Avaya Aura CN6.0, how is the license file installed on the server?
Answer: D
Explanation:
QUESTION NO: 39
Concerning the type of integration with communication manager, on the navigation pane, where us
A. Click the system wide Messaging parameters, than switch integration type field.
B. Click the switch link administration, and then switch type.
C. Click integration type
D. Click Switch link administration, then switch link admin, and then switch integration type field
Answer: D
Explanation:
QUESTION NO: 40
A. CM_Simplex
B. CM_survRemote_Embeded
C. CM_Duplex
D. CM_onlyEmbeded
Answer: D
Explanation:
QUESTION NO: 41
For the Duplex S8800 servers running CM 6.0, by default which Ethernet port communication with
IPSts?
A. Eth0
B. Eth1
C. Eth2
D. Eth3
Answer: A
Explanation:
QUESTION NO: 42
Answer: B
Explanation:
QUESTION NO: 43
A. Network region
B. Gateway node name
C. Node name
D. Duplicate node name
E. link
Answer: A,C,E
Explanation:
QUESTION NO: 44
Which three procedures are used to determine whether a gateway with a survivable remote server
has lost its H.248 link (connection) to the main (Primary) servers? (Choose three)
A. Execute the Communication Manager command display alarms, to see whether the Link Loss
Delay timer has expired
B. Execute the Communication Manager command display alarms, to see whether the No Service
Timeout Timer (NSTT) has expired
C. Execute the SAT command List media-gateway from the remote survivable server, to
determine whether the media gateway is registered with a survivable server
D. Execute the SAT command status media-gateways, to determine which media gateways are
not registered to the main server
E. Execute the command status H.248 line from the remote gateway, to determine whether the
link to the main server is active
Answer: A,C,D
QUESTION NO: 45
A user at a remote branch location is registered to a G450 media Gateway connected via
processor Ethernet (PE) to a main communication manager in the core. The report that they are
no longer able to place calls to users at the core
Which three procedures can be used to diagnose the source of problem? (Choose three)
A. Confirm that the registered field on the communication Manager Display media-gateway to Y.
B. Conform that the PE interface is active by executing the communication manager display
processor Ethernet command and confirm that the allow H.248 Gateway field is set to Y.
C. Use the show MGC command on the media gateway to confirm the IP address of the PE
enabled server at the core is administered as the primary controller of the media gateway.
D. Use the list registered IP-station command on the communication manager to determine
whether the user on the media gateway is registered.
E. Use the list survivable processor command to confirm that the survivable server is registered to
the main communication manager.
Answer: A,D,E
Explanation:
QUESTION NO: 46
How is the status of virtual machines (eg.DOM-0, CDOM-0, CM 6.0) on S8800 server checked?
Answer: A
Explanation:
QUESTION NO: 47
Answer: A
Explanation:
QUESTION NO: 48
A technician is asked to retrieve a maintenance log for CMM that shows the information for 800
AM to 5:00 PM local tome that day.
Answer: D
Explanation:
QUESTION NO: 49
Answer: B
Explanation:
QUESTION NO: 50
A newly installed main Cm 6.0 server indicates it is in license error mode. A technician again 45
minutes later and it is still in error mode. The license was installed from the system management
interface (SMI)?
A. The installer used the wrong interface to install the license and it is therefore not installed.
B. The server cannot communicate with the IPSI or media gateway whose serial number was
used in the license file.
C. The license audit runs every 60 minutes and the error will be resolved in 15 minutes.
D. The installer loaded a license for one of the survivable servers, not the main server, and the
IPSIs, media Gateways, and/or IP phones have registered to it
Answer: D
Explanation:
QUESTION NO: 51
The backup communication Manager, what two choices does the customer have? (Choose two)
A. Backup/restore
B. Backup now
C. Schedule backup
D. Backup/restore later
Answer: B,C
Explanation:
QUESTION NO: 52
A user at extension 1111 complaints that when dialing extension 2222, the call is the call is
unexpectedly answered by a person at extension 3333. All other calls made are connected as
expected. There is not display on the phone. While at the SAT, the technician has the user repeat
the call to extension 2222
Which command identifies the reason this phone call is behaving in the expected way?
Answer: A
Explanation:
QUESTION NO: 53
Which greeting should be received when you are calling the messaging Hunt group?
A. Welcome to Audix
B. Welcome to messaging
C. Your call is being answered by Audix
D. Please leave a message after the tone
Answer: A
Explanation:
QUESTION NO: 54
What two pieces of information does the product licensing and delivery system (PLDS) required to
be entered for a license file to be generated? (Choose two)
A. Serial number
B. License activation code
C. MAC address
D. Platform type
Answer: B,C
Explanation:
QUESTION NO: 55
Which statement describes the action to assure the CM_Simplex Template was installed
correctly?
A. From browser logged into Systen Management Console, verify cm and utility_Server appear
and application state is running.
B. From a browser using the communication Manager IP address, successfullylog into the
communication manager system management interface (SMI)
C. When monitoring the template installation workflow status, verify the message, Wizard
completely successfully displays.
D. From a browser logged into communication manager, select administration > server(
maintenance)> server>process status, click on view and verify communicaMgr appears.
QUESTION NO: 56
Answer: D
Explanation:
QUESTION NO: 57
Which two statements regarding shuffling and hairpining are true? (Choose two)
Answer: B,D
Explanation:
QUESTION NO: 58
A. MM711
B. MM712
C. MM7202
D. TN2224
QUESTION NO: 59
A network failure prevents communication between all the port networks (IPSIs) and there main
CM servers.
What is the maximum number of port networks (IPSIs) that can be registered to a survivable
remote embedded server?
A. no port network
B. 63 port networks
C. 64 port networks
D. 126 port networks
Answer: A
Explanation:
QUESTION NO: 60
Which three servers can be upgraded to communication manager Release 6.0? (Choose three)
A. S8300C
B. S8300D
C. S8510
D. S8800
Answer: B,C,D
Explanation:
QUESTION NO: 61
A customer has a communication Manager R6.0 system with IP phones and some older TDM
phone, and says there is no dial tone for all of the IP phones. All of the hardware has been verified
to be working properly.
Which two steps can be taken to identify the cause of problem? (Choose two)]
Answer: A,D
Explanation:
QUESTION NO: 62
To ensure the communication manager messaging application is working, what are three tests that
can be performed? (Choose three)
A. Call one of the two stations that you set as subscriber to the messaging server, and let the call
go to coverage
B. Leave message on a covered call and verify that the message waiting indicator (MWI) lamp on
the receiving extension is lit.
C. Call the station and after the call is answered leave a message.
D. Call the messaging hunt group from any of the stations to ensure it is answering.
E. Log into communication manager messaging to verify CDOM is running.
Answer: A,B,D
Explanation:
QUESTION NO: 63
Which statement describes how the communication message application is enabled the first time
after the installation?
A. Connect the SAT terminal login using the craft, and then enable using the enable messaging
command.
B. Open the communication manager IP address using web browser. Login as craft, click
installation, than communication manager messaging.
C. Open the communication manager IP address using web browser. Login as craft; click
Administration, then server (maintenance), than click miscellaneous, than messaging software,
and than click enable.
D. Communication manager messaging is enabled by default after the installation.
Answer: D
Explanation:
QUESTION NO: 64
Through which protocols can integration of communication manager messaging application 6.0
with communication manager occur?
(Choose two)
Answer: A,D
Explanation:
QUESTION NO: 65
An administrator has just installed a 9620 IP Phones on an existing system. The command change
IP network-map is use to administer the phone into to network region 100. All other phones are in
network region 1. Like all other 9620 phones on this system, this one successfully gets IP address
information fro, the one DHCP server. However, the new phone fails to register with CM.
Which two statements describe the cause of the problem? (Choose two)
Answer: A,C
Explanation:
QUESTION NO: 66
Which statement describes how the licensed mailboxes are enabled on a communication manager
messaging application 6.0?
Answer: B
Explanation:
QUESTION NO: 67
On a media gateway G450, into which Slot does the S8300 D server blade need to be inserted?
A. V1
B. V2
C. V4
D. V8
Answer: A
Explanation:
QUESTION NO: 68
Answer: B,C
Explanation:
QUESTION NO: 69
In which two modes is communication manager Release 6.0 deployed? (Choose two)
A. Feature server
B. Signaling server
C. Evolution server
D. System management