Professional Documents
Culture Documents
Cylinder Head Side Cover
Cylinder Head Side Cover
1 2
REAR MUDGUARD
Removal/Installation
Removal/Installation
NOTE
This procedure is shown on a F650
model. The procedure is the same for
all other models; only the shape of the
side cover is different.
BODY 355
7
SIDE COVER
Removal/Installation
Removal/Installation
NOTE
This procedure is shown on a F650
model. The procedure is the same for
all other models, only the shape of the 15
lower cover is different.
9
1. Place the motorcycle on level ground on the
centerstand.
2. Remove the lower screw (A, Figure 9) and front
screw (B) on each side securing the cover to the
frame.
3. Remove the engine lower cover.
4. Install by reversing these removal steps. Tighten
the screws securely. Do not overtighten, as the plas-
tic surrounding the screw hole may fracture.