Professional Documents
Culture Documents
Precision Finishing, Stamped and Coloured Concrete
Precision Finishing, Stamped and Coloured Concrete
Increasingly designers, home owners and builders are realizing the flexibility and
design options of working with concrete to enhance the general ambiance of the
surroundings by installing coloured, stained and stamped concrete.This provides a
quality decorative and long lasting finish to many applications from
shops,paitios,walkways and pool surroudings.
To produce a quality finish to basements, podiums and car parks etc that requires to
be coated it is essential to ensure that the concrete is finished within acceptable
tolerances. Coatings and screeds will follow the line and level of the offered
concrete surface.
Installation of acoustic thermal cladding systems cuts down outside noise and
effectively keeps the internal building cool and therefore saves on power for A/C
cooling. Internal Acoustic Ceiling systems reduces noise levels and the acoustics of
the building are not distorted.
For these types of systems it is important to ensure that the offered concrete
substrate is sound and free from spilling etc & finished to acceptable tolerance
levels. The appearance of the complete floor coating system will depend heavily on
the line and level of the offered surface. The most important aspect of any coating
system is the preparation, this is achieved by the use of captivated steel shot
blasting.
In extreme cases where power is an issue acid etching can be used with caution.
Flooring systems range from thin film systems of 300 microns up to 5000 microns
and can be resinous,cementitous, slow curing and fast curing.Unimag operatives are
familiar with all aspects of good preparation and application.