1. The document describes parameters for a single circuit 3-phase transmission line and provides calculations for voltages and currents at different points along the line.
2. It also calculates sending end voltage, current, power, power factor, efficiency, and regulation for a 160km section of 3-phase line delivering 50MVA at 132kV and 0.8 power factor.
3. Additional calculations are provided for a 100km 3-phase line transmitting 10,000kW at 0.8 power factor lagging, determining sending end current, voltage, power factor, and transmission efficiency using the nominal T method.
1. The document describes parameters for a single circuit 3-phase transmission line and provides calculations for voltages and currents at different points along the line.
2. It also calculates sending end voltage, current, power, power factor, efficiency, and regulation for a 160km section of 3-phase line delivering 50MVA at 132kV and 0.8 power factor.
3. Additional calculations are provided for a 100km 3-phase line transmitting 10,000kW at 0.8 power factor lagging, determining sending end current, voltage, power factor, and transmission efficiency using the nominal T method.
1. The document describes parameters for a single circuit 3-phase transmission line and provides calculations for voltages and currents at different points along the line.
2. It also calculates sending end voltage, current, power, power factor, efficiency, and regulation for a 160km section of 3-phase line delivering 50MVA at 132kV and 0.8 power factor.
3. Additional calculations are provided for a 100km 3-phase line transmitting 10,000kW at 0.8 power factor lagging, determining sending end current, voltage, power factor, and transmission efficiency using the nominal T method.
A Single Circuit 50Hz, 3-Phase Transmission Line has the
Following Parameters per km: R=0.2 ohm, L=1.3mH, and C=0.01 F The voltage at The Receiving End is 132kV. If The Line is Open at The Receiving End, Find the RMS Value and Phase Angle of The Following. I. The Incident Voltage to Neutral at The Receiving End (Reference) ANSWER: - 38100 volts II. The Reflected Voltage to Neutral at The Receiving End (Reference) ANSWER: - 38100 volts III. The Incident and the Reflected Voltage to Neutral at 120km from the Receiving End. ANSWER: - The Incident Voltage to Neutral at 120km from the
Receiving End=39.35 8.02 kV . The Reflected Voltage to
Neutral at 120km from the Receiving End=36.88 8.02 kV
2. Determine the Sending End Voltage, Current, Power and Power
Factor for a 160km Section of 3-Phase Line Delivering 50MVA at 132kV and PF 0.8 lagging. Also find The Efficiency and Regulation of the Line. Resistance of Line is 0.1557 ohm per km, Spacing 3.7m, 6.475m, 7.4m transposed. Evaluate the A, B, C, and D Parameters also. Diameter of Conductor is 1.956cm.
I S=197.75 28.9 V S =87.95 5.06 V S Line Line=152.34 kV
, and , Sending
PS =43278 MW End Power , Sending End Power Factor = 0.829, %
Regulation=17.10%, % Efficiency = 92.40%.
3. A 3-phase. 50-Hz overhead transmission line 100 km long has the
following constants. Resistance/km/phase = 0.1 Inductive reactance/km/phase = 0.2 Capacitive susceptance/km/phase = 0.04 10 -4 siemen. Determine (i) the sending end current (ii) sending end voltage (iii) sending end power factor and (iv) transmission efficiency When supplying a balance load of 10,000 kW at 66 kV p.f 0.8 lagging. Use nominal T method. ANSWER:-
List of Reference Books
1. Power System Analysis : John J. Grainger, William D. Stevenson Jr., Tata McGraw Hill 2. Modern Power system Analysis by I. J. Nagrath, D. P. Kothari, 4 th Edition Tata McGraw Hill. 3. Electrical Power systems: C. L. Wadhwa, 5 th Edition, New Age International Publishers.