Professional Documents
Culture Documents
Volumetrics Analysis Theory
Volumetrics Analysis Theory
You are here: Reference Materials > Analysis Method Theory > Volumetrics Analysis Theory
Volumetric analysis is a technique that employs geological observations and information to estimate original fluids-in-
place. It is often referred to as a "static method as it primarily sources its data from core samples, wireline logs, and
geological maps. Volumetric calculations are typically used prior to production to estimate reserves, and after
considerable production to determine the efficiency of recovery, the areal extent of the reservoir, and as a basis for
advanced studies such as reservoir simulations.
Rock Volume VR = A * h
Pore Volume VP = VR * = A * h *
A comprehensive geologic study of the prospect is necessary to increase the confidence and reliability of determined
reservoir properties such as volume, porosity, and fluid saturations. In calculating the volume of the reservoir, accurate
determinations of the areal extent and thickness must be made with respect to the geological structure and
depositional environment. The use of isopach maps in combination with planimetering is a commonly used method in
the determination of reservoir volume. Conclusions drawn concerning lithofacies and depositional settings are used to
provide an assessment of porosity, while wireline log and core data provide the analyst with measurements of fluid
saturations.
http://www.fekete.com/SAN/WebHelp/FeketeHarmony/Harmony_WebHelp/Content/HTML_Files/Reference_Material/Analysis_Method_Theory/Volumetrics_T 1/4
11/5/2016 Volumetrics Analysis Theory
http://www.fekete.com/SAN/WebHelp/FeketeHarmony/Harmony_WebHelp/Content/HTML_Files/Reference_Material/Analysis_Method_Theory/Volumetrics_T 2/4
11/5/2016 Volumetrics Analysis Theory
Note: To view the calculation of Cgi, see Langmuir Isotherm. Free-gas calculations are the same for all gas
reservoirs.
CBM reservoir abandonment can be determined by recovery factor, pressure, or carbon dioxide concentration. All three
are user-defined, and are based on economics. In Harmony, abandonment by pressure or carbon dioxide concentration
is available under the same menu, although only one of the factors needs to be specified for a calculation to occur.
Please note that if abandonment pressure is not defined, it is assumed to be 0 psi(a)/kPa(a) by the software.
Likewise, if (CO2)ab is not defined, it is assumed to be 100%.
http://www.fekete.com/SAN/WebHelp/FeketeHarmony/Harmony_WebHelp/Content/HTML_Files/Reference_Material/Analysis_Method_Theory/Volumetrics_T 4/4