Professional Documents
Culture Documents
1926 Ford Model AA Stake Bed PDF
1926 Ford Model AA Stake Bed PDF
mir-izdeliy.at.ua
M #P277 - Assembly Instructions
1. Select your material from a variety of
M B I hardwoods or solid core plywood.
2. Measure each pattern piece and cut the work
pieces to size accordingly. Sand as necessary.
B 3. Make all pattern pieces by adhering the paper
C
patterns to the work pieces with a repositionable
H spray adhesive. Cut the outer shapes and any
interior designs. And drill where indicated.
4. Remove all paper patterns. Sand where needed.
Q J The edges can be rounded by sanding or using
N a small roundover router bit if desired.
K E
5. Assemble by first attaching the Spacer Block
P to the Frame. Then attach the Front and Rear
O G Windows and Seat assembly to one Side. Next
L A
attach the remaining Side and Roof. Secure this
assembly into place on the Frame. Then attach
the Hood and Radiator assembly to the Frame.
F D Now secure the Side, Front, and Rear Rails to
the Bed. Add the Bed Rails and secure the Stake
#P277 Bed assembly into place on the Spacer Block.
1928 Ford Model - AA Stake Bed Finally, add the Wheels, Fenders, and Bumper.
Finish as desired.
GREAT AMERICAN
mir-izdeliy.at.ua
DOWNLOADABLE PATTERNS TM
The Berry Basket Copyright 2002 All Rights Reserved
www.greatamericanscrollsaw.com a division of The Berry Basket
#P277
1928 FORD MODEL - AA STAKE BED
Description Item Qty Size
Side/Door A 2 3/8T x 4W x 5 1/8L
Side Rail B 2 1/4T x 3 1/4W x 7 1/4L
Roof C 1 3/8T x 4 1/2W x 4 3/4L
Fender D 2 3/4T x 2 5/8W x13 1/4L
Hood E 1 2 5/8T x 2 5/8W x 4 1/8L
Frame F 1 3/4T x 4 1/2W x 13 5/8L
Radiator G 1 3/8T x 2 5/8W x 3 1/8L
Front Window H 1 3/8T x 3 3/4W x 5 1/8L
Rear Window I 1 3/8T x 3 3/4W x 5 1/8L
Seat Back J 1 3/8T x 1 3/4W x 3 3/4L
Seat K 1 3/8T x 1 5/8W x 3 3/4L
Seat Base L 1 1 1/2T x 1 1/2W x 3 3/4L
Front/Rear Rail M 2 1/4T x 3 1/4W x 5L
Bed N 1 3/8T x 5 1/2W x 7 1/4L
Spacer Block O 1 1 3/4T x 4 1/2W x 5 1/2L
Bed Rail P 2 1/4T x 3/8W x 7 3/4L
Bed Rail Q 2 1/4T x 3/8W x 5 1/2L
Bumper R 1 3/4T x 5/8W x 6L
#P277
Drill using a #52 drill bit
#P277
(#A157) and use a #17 x 3/4
finishing nail for door hinge
Roof (C)
A
B Top view of Doors Front of auto
Door hinge
3/8 T Left Door
Seat assembly
C
D
mir-izdeliy.at.ua
#P277
Roof (C)
Stock: 3/8,
top view
Bumper (R)
#P277 mir-izdeliy.at.ua
The Berry Basket Copyright 2002
mir-izdeliy.at.ua
Pattern overlap line
Hood (E)
Thickness: 2 5/8, Radiator (G)
top view goes here
Headlights
Fender (D)
welding rod here for
Drill for
#A246
Hood hinge and on
Door for handle
Radiator (G)
Stock: 3/8, front view
Lights #A247
Drill for Tail
#P277
Rear edge of
Bed (N)
Frame (F)
Stock: 3/4
Left pattern piece.
Front Rail (M)
Bed Rail (Q)
Rear Window (I)
Seat Base (L)
Pattern overlap line
mir-izdeliy.at.ua
Radiator (G)
goes here
Steering
wheel
mir-izdeliy.at.ua
#P277
The Berry Basket Copyright 2002
The Berry Basket Copyright 2002
#P277
mir-izdeliy.at.ua
Stock: 3/8
Seat (K)
Stock: 3/8
front view
Thickness: 1 1/2,
Seat Base (L)
Front Window (H)
mir-izdeliy.at.ua
#P277
The Berry Basket Copyright 2002
Spacer Block (O)
Thickness: 1 3/4,
top view
mir-izdeliy.at.ua
#P277
The Berry Basket Copyright 2002