The document provides steps to define structural elements and generate a mesh for finite element analysis. It instructs the user to create a line displacement between points (0,4) and (1,4), set the displacement to fixed, and specify a uniform displacement of -0.05m in the vertical direction. It then states that once the geometry model is complete, the finite element mesh can be generated by choosing the mesh mode.
The document provides steps to define structural elements and generate a mesh for finite element analysis. It instructs the user to create a line displacement between points (0,4) and (1,4), set the displacement to fixed, and specify a uniform displacement of -0.05m in the vertical direction. It then states that once the geometry model is complete, the finite element mesh can be generated by choosing the mesh mode.
The document provides steps to define structural elements and generate a mesh for finite element analysis. It instructs the user to create a line displacement between points (0,4) and (1,4), set the displacement to fixed, and specify a uniform displacement of -0.05m in the vertical direction. It then states that once the geometry model is complete, the finite element mesh can be generated by choosing the mesh mode.
Step 15: Click Structural Tab in main window Step 16: Click Create prescribed displacement button. Select Create line displacement option. Step 17: In the draw area move the cursor to point (0,4) and click the left mouse button. Move to point (1,4) and click left mouse button again. Click right mouse button to stop drawing Step 18: Set the prescribed displacement (Displacementx) to Fixed. Specify uniform prescribed displacement (0.05m) in the vertical direction by assigning -0.05 to uy,start,ref
15
1 17 8
16
1.3 Mesh Generation
When the geometry model is complete, the finite element mesh can be generated. Step 19: Choose Mesh mode