Professional Documents
Culture Documents
Military Media Inc.: - Re-Glue The Threads Back On. Insert It Into A Socket and Leave Area Immediately
Military Media Inc.: - Re-Glue The Threads Back On. Insert It Into A Socket and Leave Area Immediately
Military Media Inc.: - Re-Glue The Threads Back On. Insert It Into A Socket and Leave Area Immediately
DO NOT
ATTEMPT TO MAKE THIS EXPLOSIVE. THIS CD IS FOR READING
ENJOYMENT ONLY. MAKING THIS EXPLOSIVE COULD INJURE OR
KILL YOU. THIS CD IS NOT INTENDED AS A RECIPE BOOK.
Materials needed:
- Carefully pour the black powder into the hole. Use enough so
that it touches the filament!
- Heat the threads of the bulb VERY carefully to melt the glue.
Remove threads, slowly drawing out the filament. Do NOT break the
electrical igniters and/or the filament or this won't work!!
- Pour the liquid into the bulb, and slowly lower the filament
back down into the bulb. Make sure the filament is dipped into the fluid.
- Re-glue the threads back on. Insert it into a socket and leave area immediately.