‘AP Secu Hote
EID” 480149 - New profile parameter for user scripting at the frontend
Version 23 Validity: 20.01.2005 - active Language English
Header Data
Released On 24.01.2005 145311
Release Status Released for Customer
Component BC-FES.GUI Graphical User interface
Priority Comrection with low priority
Category —Programerror
Symptom
‘The sapgui/user_scripting parameter is imported again. If this parameter is set to TRUE, the
scripting functions can be used with a GUY as of version 6.20 on the front end.
The default value of the parameter is FALSE so that scripting to the system is not possible.
Note that you must enter the values in upper case;
There are 2 options for setting the parameter: In transaction rz11 and in the server profile. If the
parameter is only set in rzil, the change is lost when you restart the server.
Setting the parameter in the SAP system
Xf possible, dynamic setting of the parameter is executed using transaction rzll. specify the
parameter nine ‘sapgui/user_scripring and select "Display
Provided that the current value is set to FALSE, select the ‘change value’ button in the toolbar. A
trindow noly appears, in which you can enter the few value TRUE. then you save the change, the indow
Closes and the current value of the parameter changes to TRUE. This change only becones ‘effective
then you log onto the system again.
Ff the parameter is not found, you must import the relevant Support Package in accordance with the
Tist below.
Xf the current value does not change accordingly after you have saved the change, it means that the
kernel is too old. In this case, import the required kernel patch, as specified below.
Setting the parameter in the server profile
If you have not imported the support Package, you can switch the scripting on if you set the
parameter in the profile file of the application server with the following line:
Sapgui /user_scripting = TRUE
This procedure only requires the specified kernel patch level, however, you must restart the
application server.
Other Terms.
Reason and Prerequisites
Solution
‘the parameter is delivered with the following kernel patches:
+6.10; 360
+ 4.60: 948
+ 4.58: 753
+ 4,08: 903
+ 3.1: 650
The parameter can be dynamically activated in the following kernel versions, that is, without having
torestart the application server:
+ 6.20 Release 6.20 and subsequent versions+ 6.10 Release 6.10 as of patch 391
+ Release 4.60 as of patch 972
‘Support Packages & Patches
Release Support Package
498 | SAPKB40537
| SAPKB46C20
‘SAPKBAGD 17,
‘SAPKB61012
‘SAPKH31196
SAPKH40B71
| SAPKHA5B49
References
This document refers to:
SAP Notes
692245. Additional server based secutty options for Scripting
527737 Composite SAP Note about SAP GUI Scnpting
511310 Message data for eCATT-controlled GUI
This document is referenced by:
SAP Notes (3)
511310 Message data for eCATT-contoled GUI
527737 Composite SAP Note about SAP GUI Scriating
1906322 Resecosding