Professional Documents
Culture Documents
CBUS Brochure Jul11
CBUS Brochure Jul11
Wa l l S w it c h e s
G e n e ra l I n p u t U n it s
1923
25
Pa s s ive I n f ra - r e d M o t io n D e t e c t o r s
I n f ra - r e d R e ce ive r s
To u c h S cr e e n s
30
C -B u s O u t p u t U n i t s
35
35 A rc h i t e ct u ra l D im m e r s
43
52
P ro fe s s io n a l D im m e r s
D i n R a il D im m e r s
55 I n f ra - r e d O u t p u t U n it s
57 D i n R a il R e lay U n it s
63 S t a n d a r d R e lay U n it s
65 C -B u s S y s t e m U n i t s a n d A c c e s s o r i e s
65 W i s e r H o m e C o n t r o lle r
72
76
C -B u s S o f t w a r e
M u l t i - R o o m Au d i o S y s t e m
83 C -B u s E n a bl e d S e c u r i t y Pa n e l
84 C -B u s W i r e l e s s S y s t e m s
88 Wa l l S w it c h e s
94 Plug Adaptors
96 R e m o t e C o n t r o l U n it
96
98
W i re le ss G a t eway
C -B u s S ch e m a t i c s
3
Clipsal C-Bus
Overview
Introduction C-Bus Network Design
The Clipsal C-Bus system is a microprocessor based wiring Considerations
system to control lighting and other electrical services.
Up to 1000m of C-Bus Cat 5 UTP cable may be connected
Whether ON/OFF control of a lighting circuit or analogue to a single C-Bus network
type control such as dimming electronic fluorescent
ballasts, C-Bus can control and automate virtually any type Up to 100 C-Bus units may be connected to a single
of electrical load. C-Bus network
To ensure fast and reliable operation, each device has its own Where more than 1 km and/or 100 standard C-Bus units
in-built microprocessor, which can be individually programmed via are required, two or more networks can be created and linked
point and click PC based software, or via Learn Mode which with C-Bus Network Bridge and/or C-Bus Ethernet
doesnt require a PC. Interface Units
C-Bus information is held within individual C-Bus units rather Maximum number of networks in one installation is 255
than one central point. This ensures optimum communications (this limitation does not apply if a C-Bus Ethernet Interface is
speed and reliability. utilised, the system size is then limited to IP Addressing only)
Whilst a computer is unnecessary for normal C-Bus operation, Maximum number of networks connected in series to the
C-Bus PC based control and management software is available local network via Network Bridges is seven (i.e. using six
and provides additional flexibility to clients requiring this type network bridges)
of control. Each standard C-Bus unit requires 18mA @ 36Vdc to operate
Clipsal C-Bus is suitable for a wide range of applications, correctly. Some C-Bus units, e.g. 5500PC require 32mA.
for example. Some C-Bus units, e.g. L5108D1A are self-powering and do
not take current from the 36V dc C-Bus network
Commercial Lighting Control
Fluorescent lighting control for energy cost saving in high More than one C-Bus power supply can be connected to
rise buildings a C-Bus network to provide sufficient power to the C-Bus
High-bay control in warehouses for energy cost saving units, the C-Bus power supplies will share the load evenly.
Mood lighting in restaurants and retail outlets Maximum total power supply allowed is 2,000mA (2A)
Flexible and integrated control of lighting and Audio Visual Any combination of power supply units is allowed as long as
equipment in board rooms the total power available is 2,000mA or less
Architectural lighting control for hotel foyers, ballrooms, art
galleries and museums. Each C-Bus network requires only one network burden. This
network burden is software selectable on C-Bus output units
Standalone Room Lighting Control Each C-Bus network requires at least one system clock-
Integrated automation via touch screen user interfaces for generating unit (for data synchronisation)
conference rooms and home theatres
Multiple scene / mood setting. C-Bus power supply units may be connected to different phases
Network
System Devices Controllers Gateways
Support Devices
Multi-room Matrix
Amplifiers Speakers
Audio Devices Switchers
5
C-Bus Input Units
Wall Switches
Dynamic Labelling Technology DLT - Saturn - rectangular series
Page/scroll button
5085DL-380
Wall switch 5 button,
DLT, cream
5085DL-780
Wall switch 5 button,
DLT, mid-brown
5055DL,GB
Wall switch 5 button,
DLT, battleship grey
5055DL,WE
Wall switch 5 button,
DLT, white
7
C-Bus Input Units
Wall Switches
Saturn C-Bus Wall Switches Saturn - rectangular series
Impact resistant glass fascia, available in pure white, white,
black, cream and mid-brown
508xNL-680
Wall switch,
rectangular, black
508xNL-380
Wall switch,
rectangular, cream
508xNL-780
Wall switch,
rectangular, mid-brown
5080LC-8
Pre-labelled button caps
individually printed with 5850F,WE
commonly used labels Mounting frame, rectangular,
(pack of 66) white (pack of 5)
2 3
9
C-Bus Input Units
Wall Switches
Modena C-Bus Wall Switches Modena - Series
Available in white (WH) and black (BK) LCH882,WH
Wall switch 2 button, White
2, 4 or 6 buttons per wall switch
Fall back level option to dim indicators at a set time after the
last button press
10
Fall back level option to dim indicators at a set time after the
last button press
11
C-Bus Input Units
Wall Switches
Neo C-Bus Wall Switches
Neo - rectangular series
Night-light feature
5058NL,GB
Wall switch 8 button
12
5038TX2
Neo 8 button, hand-held
infrared remote control, for
Neo switches (also suits
C-Bus 30M Wall Switches,
C-Bus Multisensor and
503xNIRL series wall switches)
5052NRI
Neo rocker cover with
ID window (pack of 10)
13
C-Bus Input Units
Wall Switches
Reflection C-Bus Wall
Reflection
Switches
R5061NL
Wall switch 1 button
Architectural, flat stainless steel C-Bus wall switches
No visible screws
R5063NL
Wall switch 3 button
R5064VNL
Wall switch 4 button
14
Wall Switches
R5066NL
5031NL
Wall switch, 6 button
Wall switch, 1 button, rectangular
5032NL
Wall switch, 2 button, rectangular
5034NL
Wall switch, 4 button, rectangular
5031NL
Wall Switches
C5031NL
R5060WB Wall switch, 1 button
Wallbox to suit Reflection C5032NL
range of wall switches Wall switch, 2 button
Important note: This wall box must C5034NL
be used to install Reflection Wall switch, 4 button
Wall switches
C5031NL
May be programmed as dimmers, timers and on/off
toggle switches
1, 2 or 4 buttons per wall switch
Each unit features a programmable status indicator
Available in a wide range of colours
Units draw 18mA from a C-Bus network
C-Bus Learn Enabled
15
C-Bus Input Units
Wall Switches
Slimline SC2000 Series C-Bus
Metal Plate and Multi-Gang
Wall Switches C-Bus Wall Switches
SC5031NL Wall switch 1 button, orange LED May be programmed as dimmers, timers and on/off
SC5032NL Wall switch 2 button, orange LED toggle switches
SC5034NL Wall switch 4 button, orange LED Each button features a programmable LED status indicator
SC5031NLB Wall switch 1 button, blue LED Available in stainless steel and brass finishes
SC5032NLB Wall switch 2 button, blue LED
The button dollies are available in White, Black or Brown
SC5034NLB Wall switch 4 button, blue LED
SC5031NL The B style metal plate range is available in up to 132
gang configuration
May be programmed as dimmers, timers and
on/off toggle switches Wall boxes are supplied when ordering 8 gang or
higher configurations
1, 2 or 4 buttons per wall switch
Contact Clipsal when ordering above 24 gang
Each button features a programmable LED status indicator
Each 4 gang unit array draws 18mA from a C-Bus network
Available in a wide range of colours
C-Bus Learn Enabled.
Units draw 18mA from a C-Bus network
16
BB5031NL
Wall switch 1 button
BB5032NL B Style Brass
Wall switch 2 button
BB5034NL Flat Plate
Wall switch 4 button
5008B164/3L
Wall switch 8 button
BB5032NL 5012B164/4L
Wall switch 12 button
5020B164/7L
Wall switch 20 button
5024B164/8L
Wall switch 24 button - horizontal 5024B164/8L
17
C-Bus Input Units
Wall Switches
C-Bus 30M Wall Switches
C-Bus - 30M series
Mounts into any Clipsal grid plate with a 30M aperture 5031NMMIRL
(ordered separately) 30M Wall Switch
Master + IR, White
Available in master and slave mechanisms
Fall back level option to dim indicator at a set time after the
last button press
18
5504GI 5104BCL
General input unit, 4 channel Bus coupler input unit, 4 channel
Can be used to measure analogue values (0-1V, 0-5V, 5104BCL used to interface up to 4 standard voltage
0-10V, 0-20V, 0-20mA, 4-20mA, 500 Ohm, 1k Ohm, 3k free mechanical switches, including latching and toggle
Ohm and 10k Ohm thermistor inputs) switches to C-Bus
Requires a 24V d.c. connection (power pack included) 5104BCL supports onboard scenes
Units draw 18mA from a C-Bus network. 5102BCLEDL used to interface up to 2 standard voltage
free mechanical switches, including latching and toggle
switches to C-Bus, incorporates remote LED facility
19
C-Bus Input Units
L5504AUX 5031RDTSL,WE
Auxiliary input module, 4 channel Temperature sensor, 0 - 50 degrees centigrade
Four channel auxiliary input module, DIN rail mounted Used to measure and regulate either heating or cooling in
the range 0 - 50 degrees centigrade
4M DIN Modules Wide
Digital sensor (doesnt require calibration in the field)
Dimensions 72mm x 85mm x 65mm
Programmable target temperature and margin on
Permits voltage free switches to be connected to C-Bus, installation
such as Clipsal 30 Series mechanisms, limit switches and
weatherproof switches Programmable set back temperature for when room is
unoccupied
Each unit features a programmable status indicator
Broadcast of temperature over C-Bus network
The unit may be programmed in the same way as a wall
switch, to achieve the same functions such as timer, Adjustable temperature broadcast interval
dimmer or toggle switches
Temperature offset capabilities
Draws 18mA from a C-Bus network
Provides additional zone sensors for the C-Bus 4 zone
C-Bus Learn Enabled Thermostat
20
5031PEWP,GY
Light level sensor, 40 - 1600lux,
weatherproof
21
C-Bus Input Units
5070THB 5070THP
C-Bus thermostat, C-Bus thermostat,
programmable, single zone, programmable, 4 zone,
no on board HVAC plant no on board HVAC plant
control relays control relays
Single zone C-Bus thermostat Four zone (plus the common zone) programmable
C-Bus thermostat
Wall Mounted
Wall mounted
Dimensions 92mm x 127mm x 24mm
Dimensions 105mm x 149mm x 24mm
Support for control of HVAC units via C-Bus or the
internal HVAC relays (RWG control) Support for control of HVAC units via C-Bus or directly
using on board HVAC relays (RWG control)
Manually adjustable temperature set point and mode of
operation (heating, cooling or ventilation) Manually adjustable temperature set point, mode
of operation (heating, cooling or ventilation) and
The unit includes fan speed control and a Setback or time schedules
Economy Mode
On board 7 day HVAC time scheduling (user
Easy to use operator interface includes an integral LCD programmable), manual fan speed control, and
to display the current temperature and mode of operation setback mode
Draws 40mA from a C-Bus network. Easy to use interface, comprising of an LCD, manual
control buttons and a rotating dial with an integral
press switch
22
PIR motion sensor suitable for outdoor use PIR motion sensor suitable for indoor use
The unit has a field of view of 110 and a detection range The unit has a coverage range of 6m x 6m and a field of
which extends 18 metres view of 90
The unit features a light threshold adjustment on the unit The unit features a light threshold adjustment on the unit
The time delay is programmable in the range 1 second to The time delay is programmable in the range 1 second to
18 hours 18 hours
Draws 18mA from a C-Bus network Draws 18mA from a C-Bus network
23
C-Bus Input Units
360, flush, ceiling mount PIR motion sensor Flush mount design with 360 detection pattern
24
C5034NIRL
2000 Series 4 channel infra-red receiver
with 4 buttons
5031NIRL
4 channel infra-red receiver,
rectangle
SC5034NIRL
4 channel infra-red receiver
with 4 buttons
25
C-Bus Input Units
SL5031NIRL
4 channel infra-red receiver
SL5034NIRL
4 channel infra-red receiver
with 4 buttons
26
Remote Controls
C-Bus Hand-held
Universal Infra-red
Infra-red Transmitters Remote Control Unit
Works in conjunction with the infra-red receivers Universal, hand held, infrared remote control unit for
on page 25 control of electronic devices equipped with an infrared
(IR) remote
4 channel and 12 channel units available
Control of up to 16 devices including C-Bus, DVDs, TVs,
The 4 channel device controls bank A of the receivers satellite receivers, VCRs and CDs
The 12 channel device controls banks A, B and C Large touch screen display
of the infra-red receivers Blue LED backlighting
Range up to 15 metres (line of sight). LED indicators provide information and feedback on:
o Status of the beep feature (audible button
press confirmation)
o Battery low warning
o Confirmation of a successfully transmitted infrared code
5034TX o Error warning
4 button hand-held
o Touch screen page number.
infra-red transmitter
User programmable buttons for each device include 7
rubber buttons and 48 touch screen buttons
Quick Control buttons
Sleep button
Page / date button
Pre-programmed manufacturer codes for many models
Incorporates imbedded C-Bus IR codes for the C-Bus
5038TX and 5035TX IR remote controls
5034TX12 Easy to configure with new IR codes using the
12 button hand-held learning eye
infra-red transmitter
Macro function (up to 60 commands per macro)
Learning IR codes from existing remote controls.
5030URC
Universal Infra-red Remote
Control Unit, with LCD
touch screen
27
C-Bus Input Units
Remote Controls
C-Bus Hand-held
5084TX
Infra-red Transmitters 4 button C-Bus Infared
Remote Control with holder
28
5088TX 5080TXC
8 button C-Bus Infared C-Bus Remote
Remote Control Control Holder (spare)
with holder
29
C-Bus Input Units
Touch Screens
C-Touch 6.4 Inch Colour C-Touch 6.4 Inch Colour
Touch Screens Touch Screen - Saturn Series
Available in Neo, flat stainless steel and Saturn Glass 5080CTC2-PW
style surrounds Colour touch screen, 6.4
inch colour, pure white
6.4 (diagonal), VGA, 640 x 480 pixels, colour LCD screen glass facia, less wall box,
less power supply
Displays pages of graphical items, such as buttons,
sliders and images that perform C-Bus related functions
when pressed
30
5050CTC2,WE 5000CTCNA
Colour touch screen, Nail bracket for 6.4 inch
6.4 inch colour, neo white colour touch screen
facia, less wall box, less
power supply
5000CTCRM
Colour Touch Screen Gyproc bracket for 6.4 inch
colour touch screen
- Metal Plate Series
BS5000CTC2
B style metal plate
colour touch screen,
6.4 inch colour, stainless
steel style facia, less wall
box, less power supply 5000CTCPS/2
Power supply for 6.4 inch
colour touch screen, V2
5035TX2
Remote control to suit C-Bus
Touch Screen (spare).
31
C-Bus Input Units
Touch Screens
C-Touch Spectrum Colour C-Touch Spectrum Colour
Touch Screens Touch Screens
Saturn series - Wall Mount
Wall mount or desk mount, touch sensitive colour LCD C-5080CT2 and C-5080CTL2
touch screen Colour Touch Screen, Saturn
glass fascia. Available in
Displays pages of graphical items, such as buttons, sliders pure white (-PW), white
and images that can perform C-Bus related functions (,GF), black (-6), cream (-3)
when pressed and mid-brown (-7) and also
with and without C-Bus
320 x 240 pixel 65k colour LCD resolution Logic Engine
Adjustable LED backlighting with ambient light compensation
32
LCD uses white on black technology to enhance clarity Neo series - Wall Mount
Available with or without C-Bus Logic Engine features.
5050CT2 and 5050CTL2
Programmed via a standard USB port (easily accessible) Available in grey/brushed
aluminium (,GB), white
USB port can be used as a PC interface to a C-Bus System (,WE), black (,BK) and
white/brushed aluminium
Separate RS-232 port is included for third party device (-28) and also with and
integration (C-Bus Logic Engine model only) without C-Bus Logic Engine
33
C-Bus Input Units
Touch Screens
Desktop Touch Screens C-Touch Spectrum and B&W
MkII Touch Screen Accessories
C-Touch Spectrum Colour
C-5000CTD2-WE 5000CT2WB
C-Touch Spectrum desktop Wall box for wall mount model
touch screen, white
C-5000CTDL2-WE
C-Touch Spectrum desktop
touch screen with C-Bus Logic
Engine, white
5000CT2RS232
RS232 lead for integrating
C-5000CTD2-BK with third party devices
C-Touch Spectrum desktop (Logic Engine model only)
touch screen, black
C-5000CTDL2-BK
C-Touch Spectrum desktop
touch screen with C-Bus Logic
5035TX2
Engine, black
Remote control to suit C-Bus
Touch Screen (spare)
C-5000CTD2-GY
C-Touch Spectrum desktop
touch screen, grey
C-5000CTDL2-GY
C-Touch Spectrum desktop
touch screen with C-Bus Logic
Engine, grey
B&W MkII
5000CTD2,WE
B&W MkII desktop touch
screen, white
5000CTDL2,WE
B&W MkII desktop touch screen
with C-Bus Logic Engine, white
5000CTD2,BK
B&W MkII desktop touch
screen, black
5000CTDL2,BK
B&W MkII desktop touch screen
with C-Bus Logic Engine, black
5000CTD2,GY
B&W MkII desktop touch
screen, grey
5000CTDL2,GY
B&W MkII desktop touch screen
with C-Bus Logic Engine, grey
34
Dimmer Units
Architectural High Powered Architectural High Powered
Dimmers Dimmers
Non RCD models
Modular design with individual dimmer channel cards
35
C-Bus Output Units
Dimmer Units
Architectural High Powered
Dimmers
12 Channel non RCD models
L5112D10UA
12 Channel C-Bus
Architectural Dimmer,
Universal 10A per
channel
L5112D5UA
12 Channel C-Bus
Architectural Dimmer,
Universal 5A per channel
36
L5106D16UA
6 Channel C-Bus
Architectural Dimmer,
Universal 16A per
channel
L5106D10UA
6 Channel C-Bus
Architectural Dimmer,
Universal 10A per
channel
37
C-Bus Output Units
Dimmer Units
Architectural High Powered Architectural High Powered
Dimmers Dimmers
3 Channel non RCD models 3 Channel non RCD models
L5103D20UA L5103D5UA
3 Channel C-Bus 3 Channel C-Bus
Architectural Dimmer, Architectural Dimmer,
Universal 20A per Universal 5A per channel
channel
L5103D16UA
3 Channel C-Bus
Architectural Dimmer,
Universal 16A per
channel
L5103D10UA
3 Channel C-Bus
Architectural Dimmer,
Universal 10A per
channel
38
39
C-Bus Output Units
Dimmer Units
Architectural High Powered
Dimmers
12 Channel RCD models
L5112D10UAR6
12 Channel C-Bus
Architectural Dimmer,
Universal 10A per
channel (6 RCDs on-board)
L5112D5UAR6
12 Channel C-Bus
Architectural Dimmer,
Universal 5A per channel
(6 RCDs on-board)
40
L5106D16UAR6
6 Channel C-Bus
Architectural Dimmer,
Universal 16A per
channel (6 RCDs
on-board)
L5106D10UAR3
6 Channel C-Bus
Architectural Dimmer,
Universal 10A per
channel (3 RCDs
on-board)
41
C-Bus Output Units
Dimmer Units
Architectural High Powered Architectural High Powered
Dimmers Dimmers
3 Channel RCD models 3 Channel RCD models
L5103D20UAR1 L5103D5UAR1
3 Channel C-Bus 3 Channel C-Bus
Architectural Dimmer, Architectural Dimmer,
Universal 20A per Universal 5A per channel
channel (1 RCD on-board) (1 RCD on-board)
L5103D16UAR1
3 Channel C-Bus
Architectural Dimmer,
Universal 16A per
channel (1 RCD on-board)
L5103D10UAR1
3 Channel C-Bus
Architectural Dimmer,
Universal 10A per
channel (1 RCD on-board)
42
43
C-Bus Output Units
Dimmer Units
Professional High Powered Professional High Powered
Dimmers Dimmers
12 Channel non RCD models 12 Channel non RCD models
L5112D20LP L5112D5LP
12 Channel C-Bus 12 Channel C-Bus
Professional Dimmer, Professional Dimmer,
LE - 20A per channel LE - 5A per channel
L5112D16LP L5112D3LP
12 Channel C-Bus 12 Channel C-Bus
Professional Dimmer, Professional Dimmer,
LE - 16A per channel LE - 3A per channel
L5112D10LP
12 Channel C-Bus
Professional Dimmer,
LE - 10A per channel
44
L5106D10LP
6 Channel C-Bus
Professional Dimmer,
LE - 10A per channel
L5106D5LP
6 Channel C-Bus
Professional Dimmer,
LE - 5A per channel
45
C-Bus Output Units
Dimmer Units
Professional High Powered
Dimmers
3 Channel non RCD models
L5103D20LP
3 Channel C-Bus
Professional Dimmer,
LE - 20A per channel
L5103D10LP
3 Channel C-Bus
Professional Dimmer,
LE - 10A per channel
L5103D5LP
3 Channel C-Bus
Professional Dimmer,
LE - 5A per channel
46
L5103DxxLPRx
3 Channel C-Bus
Professional Dimmer,
LE Available in 5 Amp,
10 Amp and 20 Amp
models.
47
C-Bus Output Units
Dimmer Units
Professional High Powered Professional High Powered
Dimmers Dimmers
12 Channel RCD models 12 Channel RCD models
L5112D20LPR12 L5112D10LPR6
12 Channel C-Bus 12 Channel C-Bus
Professional Dimmer, Professional Dimmer,
LE - 20A per channel LE - 10A per channel
(12 RCDs on board) (6 RCDs on board)
L5112D16LPR12 L5112D5LPR12
12 Channel C-Bus 12 Channel C-Bus
Professional Dimmer, Professional Dimmer,
LE - 16A per channel LE - 5A per channel (12
(12 RCDs on board) RCDs on board)
L5112D10LPR12 L5112D5LPR6
12 Channel C-Bus 12 Channel C-Bus
Professional Dimmer, Professional Dimmer,
LE - 10A per channel LE - 5A per channel
(12 RCDs on board) (6 RCDs on board)
48
L5106D10LPR6 L5106D5LPR3
6 Channel C-Bus 6 Channel C-Bus
Professional Dimmer, Professional Dimmer,
LE - 10A per channel LE - 5A per channel (3
(6 RCDs on board) RCDs on board)
L5106D10LPR3
6 Channel C-Bus
Professional Dimmer,
LE - 10A per channel
(3 RCDs on board)
49
C-Bus Output Units
Dimmer Units
Professional High Powered
Dimmers
3 Channel RCD models
L5103D20LPR1
3 Channel C-Bus
Professional Dimmer,
LE - 20A per channel
(1 RCD on board)
L5103D10LPR1
3 Channel C-Bus
Professional Dimmer,
LE - 10A per channel
(1 RCD on board)
L5103D5LPR1
3 Channel C-Bus
Professional Dimmer,
LE - 5A per channel
(1 RCD on board)
50
5150SMB
Mounting bracket - shallow
5150DMB
Mounting bracket - deep
5150DMX
DMX connector kit
51
C-Bus Output Units
Dimmer Units
DIN Rail Mounted Universal
Dimmer Range
L5504D2U L5504D2UP
4 channel C-Bus universal dimmer 250V a.c, 2.5A per 4 Channel C-Bus universal dimmer 250V a.c, 2.5A per
channel, inbuilt 200mA C-Bus power supply channel, no inbuilt C-Bus power supply
4 channel universal dimmer, DIN rail mounted 4 channel universal dimmer, DIN rail mounted
Suitable for use with leading edge or trailing edge Suitable for use with leading edge or trailing edge
compatible low voltage transformers compatible low voltage transformers
Suitable for low voltage electronic transformers, Suitable for low voltage electronic transformers,
incandescent lamps and low voltage lamps with incandescent lamps and low voltage lamps with
iron core transformers iron core transformers
Features a software selectable network burden and Features a software selectable network burden and
C-Bus system clock C-Bus system clock
Features an inbuilt 200mA C-Bus power supply Does not source current to the network
C-Bus Learn Enabled. Draws 18mA from C-Bus when mains is not connected
52
L5508D1A L5504D2A
8 channel dimmer 250V a.c, 1A per channel, 4 channel dimmer 250V a.c, 2A per channel,
inbuilt 200mA C-Bus power supply inbuilt 200mA C-Bus power supply
8 channel dimmer, DIN rail mounted 4 channel dimmer, DIN rail mounted
12M DIN Modules Wide 12M DIN modules wide
Dimensions 215mm x 85mm x 65mm Dimensions 215mm x 85mm x 65mm
Features 8 channels of 1A output, suitable for Features 4 channels of 2A output, suitable for
incandescent and low voltage lighting incandescent and low voltage lighting
Features a software selectable network burden and Features a software selectable network burden and
C-Bus system clock C-Bus system clock
A maximum of 10 units may be connected to any A maximum of 10 units may be connected to any
C-Bus network C-Bus network
Features an inbuilt 200mA C-Bus power supply Features a 200mA C-Bus power supply
C-Bus Learn Enabled. C-Bus Learn Enabled.
L5508D1AP L5504D2AP
8 channel dimmer 250V a.c, 1A per channel, 4 channel dimmer 250V a.c, 2A per channel,
no inbuilt C-Bus power supply no inbuilt C-Bus power supply
8 channel dimmer, DIN rail mounted 4 channel dimmer, DIN rail mounted
12M DIN modules wide 12M DIN modules wide
Dimensions 215mm x 85mm x 65mm Dimensions 215mm x 85mm x 65mm
Features 8 channels of 1A output, suitable for Features 4 channels of 2A output, suitable for incandes-
incandescent and low voltage lighting cent and low voltage lighting
Features a software selectable network burden and Features a software selectable network burden
C-Bus system clock and C-Bus system clock
A maximum of 100 units may be connected to any A maximum of 100 units may be connected to any
C-Bus network C-Bus network
Does not source current to the network Does not source current to the network
Draws 18mA from the C-Bus when mains is Draws 18mA from the C-Bus when mains is
not connected not connected
C-Bus Learn Enabled. C-Bus Learn Enabled.
53
C-Bus Output Units
Dimmer Units
C-Bus DSI Gateway Range
0-10V Analogue Output Unit
L5508DSI L5504AMP
8 channel dimmer for DSI electronic ballasts 250V 4 channel analogue
a.c, inbuilt 200mA C-Bus power supply output, 0-10V
8 channel dimmer for DSI ballasts, DIN rail mounted Analogue output module, DIN rail mounted
12M DIN modules wide
4M DIN modules wide
Dimensions 215mm x 85mm x 65mm
Provides C-Bus control of electronic DSI digital ballasts Requires a 240V a.c. connection
The module controls up to 100 DSI ballasts per channel Dimensions 72mm x 85mm x 65mm
Up to 10 units may be connected to any C-Bus network
Used in conjunction with electronic DSI ballasts Can either source or sink current and is used to drive
most types of 0-10V electronic dimmable ballasts
The Dimmer features a 200mA C-Bus power supply
C-Bus Learn Enabled. The unit provides 4 independent output channels
54
SC5034NIRT
2 channel infra-red transmitter
unit, Slimline SC2000 Series
wall plate
SL5034NIRT
2 channel infra-red transmitter
unit, Eclipse SL2000 Series
wall plate
55
C-Bus Output Units
5100HSCU
High speed
programming
cable for C-Bus 2
channel infra-red
transmitter unit.
5100RP
Infra-red code learning unit
Infra-red code learning unit, complete with Windows
based software. Required for learning third party infra-red
codes not included in the code library shipped with the
infra-red transmitter unit software.
56
Relay Units
10A Relay Units
L5512RVF L5512RVFP
12 channel relay 250V a.c, 10A inductive load per channel, 12 channel relay 250V a.c, 10A inductive load per
inbuilt 200mA C-Bus power supply channel, no inbuilt C-Bus power supply
12 channel relay module, DIN rail mounted 12 channel relay module, DIN rail mounted
Featuring 12 channels of voltage free relay switching Featuring 12 channels of voltage free relay switching
Rated at 10A incandescent or 10A fluorescent load Rated at 10A incandescent or 10A fluorescent load
per channel per channel
Incorporates a software selectable network burden and Incorporates a software selectable network burden and
C-Bus system clock C-Bus system clock
A maximum of 10 units may be connected to any A maximum of 100 units may be connected to any
C-Bus network C-Bus network
Incorporates an inbuilt 200mA C-Bus power supply These units draw 18mA from C-Bus network when
mains is not connected
C-Bus Learn Enabled.
C-Bus Learn Enabled.
57
C-Bus Output Units
Relay Units
10A Relay Units
L5508RVF L5508RVFP
8 channel relay 250V a.c, 10A inductive load per 8 channel relay 250V a.c, 10A inductive load per
channel, inbuilt 200mA C-Bus power supply channel, no inbuilt C-Bus power supply
8 channel relay module, DIN rail mounted 8 channel relay module, DIN rail mounted
Featuring 8 channels of voltage free relay switching Featuring 8 channels of voltage free relay switching
Rated at 10A incandescent or 10A fluorescent load per Rated at 10A incandescent or 10A fluorescent load per
channel channel
Incorporates a software selectable network burden and Incorporates a software selectable network burden and
C-Bus system clock C-Bus system clock
A maximum of 10 units may be connected to any A maximum of 100 units may be connected to any
C-Bus network C-Bus network
Incorporates an inbuilt 200mA C-Bus power supply These units draw 18mA from C-Bus network when
mains is not connected
C-Bus Learn Enabled.
C-Bus Learn Enabled.
58
L5504RVF L5504RVFP
4 channel relay 250V a.c, 10A inductive load per channel, 4 channel relay 250V a.c, 10A inductive load per
inbuilt 200mA C-Bus power supply channel, no inbuilt C-Bus power supply
4 channel relay module, DIN rail mounted 4 channel relay module, DIN rail mounted
Featuring 4 channels of voltage free relay switching Featuring 4 channels of voltage free relay switching
Rated at 10A incandescent or 10A fluorescent load Rated at 10A incandescent or 10A fluorescent load
per channel per channel
Incorporates a software selectable network burden and Incorporates a software selectable network burden and
C-Bus system clock C-Bus system clock
A maximum of 10 units may be connected to any A maximum of 100 units may be connected to any
C-Bus network C-Bus network
Incorporates an inbuilt 200mA C-Bus power supply These units draw 18mA from C-Bus when mains is
not connected
C-Bus Learn Enabled.
C-Bus Learn Enabled.
59
C-Bus Output Units
Relay Units
Changeover Relay Units Motorised Blinds/Curtains/
Shutter Relay Unit
L5504RVFCP
4 channel changeover relay, 250V a.c,
no inbuilt C-Bus power supply,
learn enabled
L5501RBCP
C-Bus Motorised
Blinds/Curtains/Shutter Relay,
250 V a.c, no C-Bus Power Supply
60
L5504RVF20 L5504RVF20P
4 channel relay, 250V a.c, 20A inductive load per 4 channel relay, 250V a.c, 20A inductive load per
channel, inbuilt 200mA C-Bus power supply channel, no inbuilt C-Bus power supply
4 channel 20A relay module, DIN rail mounted 4 channel 20A relay module, DIN rail mounted
4 channels of voltage free relay switching 4 channels of voltage free relay switching
Rated at 20A incandescent, 20A HID or 20A fluorescent Rated at 20A incandescent, 20A HID or 20A fluorescent
load per channel load per channel
Built in mechanical level for manual changeover of Built in mechanical level for manual changeover of
relay state relay state
Incorporates a software selectable network burden and Incorporates a software selectable network burden and
C-Bus system clock C-Bus system clock
A maximum of 10 units may be connected to any A maximum of 100 units may be connected to any
C-Bus network C-Bus network
Incorporates an inbuilt 200mA C-Bus power supply Units draw 18mA from the C-Bus when mains is
not connected
C-Bus Learn Enabled.
C-Bus Learn Enabled.
61
C-Bus Output Units
Relay Units
Ceiling Sweep Fan Control
Relay Unit
5501FRE
Remote mounting
enclosure
62
5101R 5102RVF
1 channel relay 2 channel voltage free
250V a.c. 10A relay 250V a.c, 10A
inductive load inductive per channel
Suitable for incandescent, inductive and fluorescent Suitable for incandescent, inductive and fluorescent
switching up to a maximum load of 10A switching up to a maximum load of 10A per channel
A maximum of 100 units may be connected to any A maximum of 100 units may be connected to any
C-Bus network C-Bus network
These relays do not draw any current from C-Bus These relays do not draw any current from C-Bus
network when mains power is connected. network when mains power is connected.
5101RC
1 channel relay 250V
a.c. 10A inductive load,
with cord set
63
C-Bus Output Units
Relay Units
Extra Low Voltage Relay Unit
8 x single pole, double throw (change-over) relays L5108RELVP
8 channel safe extra low
Powered from C-Bus, draws 32mA voltage relay 30V a.c./d.c.
2A per channel
Contacts rated 2A (AC3) @ 30V a.c./d.c.
Local override
Removable terminals.
64
and Accessories
Wiser Home Controller
Router platform giving connectivity to C-Bus from local 5200PG
network and internet Wiser Home
Controller
4 LAN ports (one reserved for C-Bus Network Interface)
Product contains USB flash drive with manuals, help file, etc.
65
C-Bus System Units
and Accessories
Pascal Automation Controller
Provides extended conditional 5500PACA
and real-time event programming for C-Bus C-Bus Pascal
Automation Controller
Programs downloaded to the unit from a PC
66
5000BACNET 5502DAL
C-Bus BACnet C-Bus DALI Gateway
Gateway
5502DAL2PS
C-Bus DALI Gateway plus
5500DMX two DALI power supplies
C-Bus DMX
Gateway
67
C-Bus System Units
and Accessories
C-Bus PC Interface
C-Bus Power Supply
5500PC 5500PS
C-Bus PC interface C-Bus power supply,
350mA
C-Bus PC interface, DIN rail mounted C-Bus power supply, DIN rail mounted
4M DIN modules wide 4M DIN modules wide
Dimensions 72mm x 85mm x 65mm Dimensions 72mm x 85mm x 65mm
Features two connections to C-Bus (2 x RJ45 sockets) Supplies 350mA at 18-36V d.c. to the C-Bus network
Features three connections to RS232 (2 x RJ45 and1 x Each power supply supports approximately 18 standard
DB9 sockets) C-Bus units
Units Draw 32mA from a C-Bus network Up to 5 power supplies may be used on any single
C-Bus network
5500PCU 5500NB
C-Bus USB PC interface C-Bus Network bridge
C-Bus PC interface,
DIN rail mounted
4M DIN modules wide C-Bus network bridge, DIN rail mounted
Dimensions 72mm x 85mm x 65mm Based on a 4M DIN module
Features two connections to C-Bus (2 x RJ45 sockets) Dimensions 72mm x 85mm x 65mm
Features one connection to USB (1 x type B socket) Provides a two-way C-Bus to C-Bus network interface
Units Draw 32mA from a C-Bus network Units draw 18mA from a C-Bus network
68
Interface Analyser
5500CN 5100NA
C-Bus Ethernet C-Bus network
network interface analyser
C-Bus Ethernet network interface, DIN rail mounted The Network Analyser is a tool used to measure various
C-Bus system parameters:
4M DIN modules wide
- Power Available
Dimensions 72mm x 85mm x 65mm - Clock Signal Present
Provides a two-way C-Bus to Ethernet network interface - Excess Voltage
- Add/Remove Burden
Allows C-Bus commands to be distributed via a 10 Base-T - Excess Cable Indication
Ethernet (TCP/IP) network
Dimensions 60.5mm x 120mm x 30.3mm
Features 2 x C-Bus RJ45 connections and 1 x Ethernet Measures capacitance, burden, clock signal and network
RJ45 connection voltage
The unit requires an external 9-12V d.c. power pack The network analyser is powered from C-Bus and is
supplied. supplied with a pair of leads.
5100CN2 5500NMA
C-Bus inline Ethernet C-Bus network monitor
network interface
69
C-Bus System Units
and Accessories
C-Bus Cable
C-Bus Barcode Reader
5005C305B 5100BCS
C-Bus Category 5, 4 pair, C-Bus Bar code reader,
UTP cable, 305 metres, USB connection, for use with
solid conductors C-Bus Toolkit software
5005C305BST
C-Bus Category 5, 4 pair,
UTP cable, 305 metres,
stranded conductors
4 pair, Category 5, unshielded cable with a unique outer Hand-held USB barcode reader
colour sheath specifically designed for the C-Bus system
Used in conjunction with C-Bus Toolkit software
A maximum of 1000 metres of cable is permitted on any
Provides a convenient and time saving method of
one C-Bus network
inputting information about C-Bus units, as they are
Two pairs are used for the C-Bus connection C-Bus added to an installation
positive (blue + orange) and C-Bus negative (blue/white
Unit is configured to wake up when trigger button is
+ orange/white)
depressed
The C-Bus cable must be segregated from the mains
LED indicator and audible alert provide confirmation of a
cable in C-Bus installations
barcode read
C-Bus cable has a mains rated outer sheath and
Standard Cat 5 cable does not have this rating
Suitable for use inside electrical enclosures
Available in both solid and stranded conductor variants
30RJ45SMA5SH,PK 5500BUR
Pink modular Cat. 5e RJ45 C-Bus network burden
shuttered socket
70
71
C-Bus Software
C-Bus Toolkit Software HomeGate Software
C-Bus Toolkit software is a PC-accessible C-Bus network The HomeGate application software provides a powerful
configuration and customer solution programming utility. It but simple to use interface to C-Bus via a standard PC.
allows the installer to: HomeGate provides scheduling, manual control and
monitoring of a domestic C-Bus system from a PC running
Connect directly to an installer C-Bus network via a Windows 98, 2000, NT, ME or XP. HomeGate comprises of
C-Bus PC interface unit to synchronise logical and a project editor, real time monitoring and control, a real time
physical C-Bus customer site data scheduler, security and access control and internet access.
It also includes help and support documentation.
Configure the C-Bus network to define the C-Bus
architecture of the customer site and ensure C-Bus units A HomeGate USB dongle must be purchased to take the
can communicate with each other software from an evaluation version to a full working version.
Program and commission
the customer solution
5000SDHG2/4
C-Bus Software Installer 2 network licence dongle
for HomeGate V4
Dongle
The C-Bus Software Installer Dongle is a valuable installer
tool for creating/commissioning projects using C-Bus
Version 4 Schedule Plus & HomeGate software and also
C-Bus Version 1 OPC Server. The dongle is time restricted
and allows the software to operate in normal mode for
anywhere between 48 to 72 hours per use (the software
then returns to evaluation/demo mode). The installer dongle
is compatible with future software releases. 5000SDHG10/4
10 network licence dongle
for HomeGate V4
5000SDINST/1
Installer dongle for C-Bus
software, unlimited networks.
72
5000SDOPC2/1
2 network licence dongle for
C-Bus OPC Server V1
5000SDSP10/4
10 network licence dongle for
Schedule Plus V4
5000SDOPC10/1
10 network License Dongle for
C-Bus OPC Server V1
5000SDSPU/4
Unlimited network licence dongle
for Schedule Plus V4
5000SDOPCU/1
Unlimited network license for
C-Bus OPC Server V1
73
C-Bus Software
Piced is used to configure the following devices to meet Marpa software is used to configure the C-Bus Multi
the users requirements: Room Audio Matrix Switcher unit and is freely available
from the Clipsal Integrated Systems web site. It requires
C-Touch black and white MkII touchscreen the use of USB port on the PC to connect to the Matrix
Colour C-Touch touchscreen Switcher. Marpa software requires that the C-Bus Toolkit
Pascal Automation Controller (PAC) is installed.
Wiser Home Controller
Marpa is freely downloadable from the Clipsal
The Piced software features include: Integrated Systems web site.
74
Tica software is used to configure the C-Bus Telephone Circa software is used to commission C-Bus Infrared
Interface (CBTI). It requires the use of a RS232 serial Devices (5034NIRT). The software allows the user to
port on the PC to connect to the CBTI. Tica software select IR codes and assign them to particular output
requires that C-Bus Toolkit is installed. channels on an Infrared Device and make associations
between IR codes and C-Bus events. This is achieved
Tica software is freely downloadable from the Clipsal by using the USB programming cable (5100HSCU). The
Integrated Systems web site. user can import IR device files created by the 5100RP
Infrared Reader device. Circa software requires that C-Bus
Installation Software V2 is installed.
75
Multi-Room Audio System
System Overview
The C-Bus Multi-Room Audio System allows users to listen to The C-Bus Multi-Room Audio System allows a number of
and control audio sources from convenient locations around the different system layout options. This flexibility allows for a
home. The system is both simple to install and easy to use. wide range of customer needs and installation requirements.
Two example schematics are shown opposite.
The system has been designed utilising new digital audio
distribution technology (developed by Clipsal), in conjunction Option A
with Clipsal C-Bus core technology for system communication
and integration. This basic option allows a single audio source to be
available to a number of C-Bus Audio Amplifiers and to
Clipsals digital audio distribution technology allows for noise be controlled from convenient locations around the home
and interference free audio reproduction, whilst the C-Bus (via any combination of C-Bus input devices). This option
technology allows the audio products to be seamlessly integrated requires one Cat-5 cable for the audio distribution. This cable
and used with all existing C-Bus products. For example, volume is cascaded between each Audio Amplifier.
can be controlled from the same C-Bus switch or touch screen
controlling lighting. Option B
In addition, the system allows any input audio source to be made This option allows more flexibility. Multiple audio sources are
available in any audio zone. Changes to the input audio source made available to all audio zones, with all the audio sources
can easily be made by the user from a local C-Bus device at selectable on a zone-by-zone basis via C-Bus Input Devices.
any time, regardless of where the audio source equipment (e.g., This option requires a separate (star wired) Cat-5 audio cable
CD Player) is physically located. It is compatible with most audio to each Audio Amplifier in a zone.
sources and it accommodates standard stereo line level analogue
inputs as well as digital audio TOS link inputs.
Gold Pink Red/Black Green
Cable Guide
76
Power Pack Remote C-Bus Remote C-Bus Remote C-Bus Remote C-Bus
Amplifier Amplifier Amplifier Amplifier
Option A
Audio Zone Family Room Audio Zone Rear Patio Audio Zone Ensuite Audio Zone Bathroom
C-Bus Network
Audio Distributor
Audio to Speakers
Audio Zone Bathroom
Audio Zone Ensuite
Audio Zone Rear Patio
Audio Zone Family Room
C-Bus Network
PC (Streaming Audio)
8 x Digital Audio
Outputs CD Player
Desktop Mounted
C-Bus Amplifier
Pay TV
DVD Player
Antenna
for AM/FM
reception
Option B
77
Multi-Room Audio System
Units and Accessories
Audio Matrix Switcher Audio Distribution Unit
560884/2E 560011
Deluxe Audio Matrix Switcher, Audio Distribution Unit,
C-Bus enabled, four stereo audio one stereo audio input
input sources, streaming audio source and one digital
and 8 digital audio output sources. output source
560884/2
Standard Audio Matrix Switcher,
C-Bus enabled, four stereo audio Distributes a single stereo audio source to C-Bus Audio
input sources and 8 digital audio Amplifiers via a digitised signal over Cat-5 cable.
output sources.
Does not require any C-Bus programming
Digital audio distribution technology, for noise free
audio reproduction One stereo analogue audio source input
Stream digital audio from a host PC running C-Bus Ripple One digital audio output (cascadable to multiple zones)
Software (deluxe model only)
Output can be looped between C-Bus Audio Amplifiers
Four stereo analogue audio source inputs
On-board dual AM/FM tuners Dimensions: 165mm x 50mm x 40mm.
Audio sources switched via any C-Bus input device or via the
control panel on the front of the Matrix switcher
Eight digital audio zone outputs (~45m for each star 5600P24/500AU
wired output) External power supply for
Supports audio scenes (8 scenes containing 8 zones) audio distribution unit, switch
mode, 24V d.c, 500mA (only
Cat-5 cable connection between Matrix switcher required if 560011 used to
and amplifiers
provide an additional digital
Two mono annunciation inputs input for Matrix Switcher)
Voice annunciation of channel changes (selectable)
One fibre-optic SPDIF input (digital audio compatible)
One custom digital input to allow cascading of units or for
connecting an Audio Distribution Unit giving 1 additional
stereo analogue input
C-Bus infrared output (2 zones) for third party equipment
control
Reticulated IR support
User interface consisting of LCD display and tactile
feedback switches
C-Bus messages control selection of input/output routing
Contains a C-Bus PC interface
C-Bus supply voltage: 15-36Vd.c. @ 22mA (does not provide
power for C-Bus network)
Configuration set up through USB
Control via C-Bus input devices, such as C-Bus wall
switches, touch screens, etc
Field upgradable via USB port
Dimensions: 436mm x 288mm x 80mm
Designed to be installed in locations where audio/visual
equipment is installed ie. A/V cabinet or rack.
78
560110R
10 Watt/channel (RMS)
stereo audio amplifier, C-Bus 5600P24H3750A
enabled, remote-mount version External power supply for audio
amplifier, switch mode, 24V d.c.
72W continuous output power,
ambient temperature rating of
Used in conjunction with the C-Bus Audio Matrix Switcher 60C (140F) @ 3A output
or the Audio Distribution Unit
Controllable via C-Bus input devices, such as C-Bus
wall switches, touch screens and Wiser Home Controller
Volume, bass, treble, balance controlled by C-Bus 560125MB
input devices Mounting bracket to suit 25 W/channel
remote amplifier
Quiet digital audio design
Stereo 25W RMS per channel Remote and desktop
mounted units (when power supply fitted) or stereo 10W RMS
per channel Remote mounted unit 560100E
Blank filling enclosure where
Can be cascaded off one Digital Audio Cat 5 input 480mm width is required, suits
Repeater function - digital audio pass through capability 10W/channel remote amplifier
(default on)
Pre-amp output stage for connecting to a 3rd party
power amplifier (25W RMS per channel amplifiers only)
Desktop Amplifier includes power on/off, mute, volume and 5600P24/1250AU
source select buttons and an infrared target for remote Power supply to suit 10W/
control. Also includes 3.5mm stereo head phone jack channel remote amplifier
Desktop Amplifier supports Dynamic Control via long presses
of source select buttons on front panel
Four 10W per channel amplifiers can be joined together for
installation on a 19 equipment rack tray
Signal source either:
o Distributed digital
o Locally connected line-level analogue
o Fibre-optic (TOSlink) SPDIF (16bit, 48kHz) 560110MB
Mounting bracket to suit 10W/
IR Target connection for reticulated IR support channel remote amplifier
High efficiency, ~70% at full power
Dimensions (desktop 25W RMS per channel): 181mm x
216mm x 75mm
Dimensions (remote 25W RMS per channel): 175mm x
212mm x 71mm
Dimensions (remote 10W RMS per channel): 120mm x
158mm x 40mm
C-Bus supply voltage: 15 - 36Vd.c. @ 22mA.
79
Multi-Room Audio System
Units and Accessories
Premium Audio Speakers In-ceiling Speakers
5600K01-WE
Krix Holographix Speakers
(pair), circular, in-ceiling,
3-inch full range
In-ceiling Speakers
Concealed high quality audio reproduction perfect for home Supplied as a pair
theatre, multi-room audio and outdoor audio applications
Sensitivity: 87dB
Flush mount design ensures only the front face of the speaker
is visible and is flush with the ceiling Frequency Response: 90Hz 20kHz
In-ceiling speakers come complete with black boxes to Power Handling: Max. 40W RMS amplifier power
maximise and control bass response whilst keeping out dust
Impedance: 8 ohms
Outdoor speakers are waterproof containing aluminium grilles
and mounting brackets plus marine grade stainless Dimensions: 95mm diameter x 108mm deep
steel hardware. (83mm diameter cut-out)
Colour: white.
5600K02-WE
Krix Hemispherix Speaker
(single), circular, in-ceiling,
4-inch 2-way
Supplied single
Sensitivity: 86dB
Impedance: 6 ohms
Colour: white.
80
Power Handling: Max. 100W RMS amplifier power Power Handling: Max. 80W RMS amplifier power
Colour: white.
5600K07-WE, 5600K07-BK
Krix Tropix Speakers (pair),
outdoor, marine grade
waterproof, 6.5-inch 2-way
Supplied as a pair
Sensitivity: 87dB
Impedance: 8 ohms
81
Multi-Room Audio System
Units and Accessories
Multi-Room Audio
- Accessories
8050ST
8050LD IR Shelf Target, with
IR Emitter Lead, single 1.8m cable
8050/2LD 8050TT
IR Emitter Lead, dual IR Tube Target, with 1.8m cable
8050FT
IR Flat Target, with 1.8m cable
82
Security Panel
C-Bus Enabled Security Panel
83
C-Bus Wireless System
Room B -
Networked C-Bus Wireless Units
84
85
C-Bus Wireless System
Mode 2
Simple Remote Controlled Mode
In this mode, a C-Bus Wireless Wall Switches acts as a
stand-alone dimmer or switch and a C-Bus Wireless Remote
Control operates the Wall Switch from a distance. This mode
is simple to set up and is suitable for small installations where
networking is not needed. C-Bus Wireless Wall Switch or Plug
Adaptor units are controlled using a C-Bus Wireless Remote:
In this mode, the buttons on the Wireless Wall Plate control
the local dimming or switching channels of the unit, and the
Remote Control is linked to buttons on a Wall Switch using a
Learn Mode operation. No PC is required.
86
Mode 4
Networked with Remote
In this mode, a C-Bus Wireless Wall Switch acts as a dimmer
or switch and multiple C-Bus Wireless units can be linked to
each other with the C-Bus Wireless technology. Local control
buttons control the dimming or switch channel of the unit, and
may also control other C-Bus Wireless units. Free buttons
can control the dimmer or switch channels of other units via
a C-Bus Wireless network established using Learn Mode
operations or C-Bus Toolkit software. Buttons on the Wireless
Remote are linked to Wall Switch and Plug Adaptor buttons
as desired.
Mode 5
Networked mode in combination with Cat-5 wired C-Bus units
The C-Bus Wireless Gateway is used to link a C-Bus Wireless
network to a C-Bus Cat-5 wired network. It is functionally
equivalent to a C-Bus Network Bridge. Using the Gateway,
C-Bus Wireless and Cat-5 networks can communicate and
interact with each other. Both Wireless and Cat-5 Networks
use the same command structure, and are 100% compatible.
87
C-Bus Wireless System
5884R4F2AA
C-Bus Wireless wall switch,
4 button, 2 channel relay, 4A
(fluorescent) per channel rating
5886R4F2AA
C-Bus Wireless wall switch,
6 button, 2 channel relay, 4A
(fluorescent) per channel rating
88
LHC2R8F1 5852R8F1AA
C-Bus Wireless wall switch, C-Bus Wireless wall switch,
2 button, 1 channel relay, 8A 2 button, 1 channel relay,
(fluorescent) rating 8A (fluorescent) rating
LHC4R8F1 5854R8F1AA
C-Bus Wireless wall switch, C-Bus Wireless wall switch,
4 button, 1 channel relay, 8A 4 button, 1 channel relay, 8A
(fluorescent) rating (fluorescent) rating
LHC6R8F1 5858R8F1AA
C-Bus Wireless wall switch, C-Bus Wireless wall switch,
6 button, 1 channel relay, 8A 8 button, 1 channel relay,
(fluorescent) rating 8A (fluorescent) rating
LHC4R4F2 5854R4F2AA
C-Bus Wireless wall switch, C-Bus Wireless wall switch,
4 button, 2 channel relay, 4 button, 2 channel relay,
4A (fluorescent) per 4A (fluorescent) per
channel rating channel rating
LHC6R4F2 5858R4F2AA
C-Bus Wireless wall switch, C-Bus Wireless wall switch,
6 button, 2 channel relay, 4A 8 button, 2 channel relay, 4A
(fluorescent) per channel rating (fluorescent) per channel rating
Available in white and black Available in grey and silver, white electric,
cream, desert sand, soft grey, black
and brown
89
C-Bus Wireless System
5884D2L1AA LHC4D2L1
C-Bus Wireless wall switch, C-Bus Wireless wall switch, 4
4 button, 1 channel leading button, 1 channel leading edge
edge dimmer, 500VA dimmer, 500VA
5886D2L1AA LHC6D2L1
C-Bus Wireless wall switch, C-Bus Wireless wall switch, 6
6 button, 1 channel leading button, 1 channel leading edge
edge dimmer, 500VA dimmer, 500VA
5884D1L2AA
C-Bus Wireless wall switch, LHC4D1L2
4 button, 2 channel leading C-Bus Wireless wall switch, 4
edge dimmer, 250VA button, 2 channel leading edge
per channel dimmer, 250VA per channel
5886D1L2AA LHC6D1L2
C-Bus Wireless wall switch, C-Bus Wireless wall switch, 6
6 button, 2 channel leading edge button, 2 channel leading edge
dimmer, 250VA per channel dimmer, 250VA per channel
90
5854D2L1AA 5884D2T1AA
C-Bus Wireless wall switch, C-Bus Wireless wall switch,
4 button, 1 channel leading edge 4 button, 1 channel trailing edge
dimmer, 500VA dimmer, 500VA
5858D2L1AA 5886D2T1AA
C-Bus Wireless wall switch, C-Bus Wireless wall switch,
8 button, 1 channel leading edge 6 button, 1 channel trailing edge
dimmer, 500VA dimmer, 500VA
5854D1L2AA 5884D1T2AA
C-Bus Wireless wall switch, C-Bus Wireless wall switch,
4 button, 2 channel leading edge 4 button, 2 channel trailing edge
dimmer, 250VA per channel dimmer, 250VA per channel
5858D1L2AA 5886D1T2AA
C-Bus Wireless wall switch, C-Bus Wireless wall switch,
8 button, 2 channel leading edge 6 button, 2 channel trailing edge
dimmer, 250VA per channel dimmer, 250VA per channel
Available in grey and silver, white Available in white, black, cream and
electric, cream, desert sand, soft mid-brown
grey, black and brown
91
C-Bus Wireless System
LHC4D2T1 5854D2T1AA
C-Bus Wireless wall switch, 4 C-Bus Wireless wall switch,
button, 1 channel trailing edge 4 button, 1 channel trailing edge
dimmer, 500VA dimmer, 500VA
LHC6D2T1 5858D2T1AA
C-Bus Wireless wall switch, 6 C-Bus Wireless wall switch,
button, 1 channel trailing edge 8 button, 1 channel trailing edge
dimmer, 500VA dimmer, 500VA
LHC4D1T2 5854D1T2AA
C-Bus Wireless wall switch, 4 C-Bus Wireless wall switch,
button, 2 channel trailing edge 4 button, 2 channel trailing edge
dimmer, 250VA per channel dimmer, 250VA per channel
LHC6D1T2 5858D1T2AA
C-Bus Wireless wall switch, 6 C-Bus Wireless Neo wall switch,
button, 2 channel trailing edge 8 button, 2 channel trailing edge
dimmer, 250VA per channel dimmer, 250VA per channel
92
5080SD,BK 5050SD,CM
Mounting spacer, rectangular, Mounting spacer, rectangular
black (pack of 5)
White
Black
Brown
Cream
Desert Sand
Soft Grey
93
C-Bus Wireless System
94
LHC2D3L1 LHC2D2T1
C-Bus Wireless plug adaptor, C-Bus Wireless plug adaptor,
1 channel leading edge dimmer, 3A 1 channel trailing edge dimmer, 2A
95
C-Bus Wireless System
5888TXBA 5800WCGA
C-Bus Wireless C-Bus Wireless Gateway
hand-held remote
control unit with holder
5080TXC
C-Bus Remote
Control Holder (spare)
LHC8TXRF
C-Bus Wireless Allows seamless communication between a wired C-Bus
hand-held remote network and a C-Bus Wireless Network
control unit with
holder Desktop or wall mounted
A C-Bus Cat-5 cable connected to the wired C-Bus
network is plugged into an RJ45 socket at the rear of the
Gateway
Allows control of buttons on C-Bus Wireless Wall Switch
and Plug Adaptor units remotely Power for the Gateway is provided by the wired C-Bus
network, no additional power source is required
Utilises radio frequency (RF) communication
Does not need to be pointed directly at the unit The connection to a C-Bus Wireless network is
being controlled accomplished by a C-Bus Learn Mode operation
Capable of controlling up to 10 separate Wall Switch or The connection to a C-Bus Cat-5 wired network requires
Plug Adaptor buttons the use of the C-Bus Toolkit software
A single button on a Wall Switch or Plug Adaptor can be The Gateway supports routing of messages into and
controlled by up to two C-Bus Wireless Remote Controls through both wired and wireless networks
Buttons are organised in two banks of five buttons. Banks
Messages on each network (such as button presses) can
are alternately selected by pressing the Shift button
be passed through to the adjacent network.
Up and Down buttons allow dimming of the level
associated with the last button selected (on dimmer units)
All Off button provides a convenient way to switch off all
buttons associated with the remote control unit
C-Bus Wireless Groups and Scenes can be controlled
from the remote
LCD screen and buttons incorporate a blue LED backlight
Each control button incorporates a clear window for
button labelling
Supplied with pre-labelled stickers for identification of
common areas i.e. kitchen, lounge, dining etc
20-25m range (typical).
96
97
Clipsal C-Bus
Typical Schematics
Home
98
99
SEHK/CHK/CBUS04 07/2011