Professional Documents
Culture Documents
WEG Weg Automation Reference Codes Controls 50058173 Quick Guide English
WEG Weg Automation Reference Codes Controls 50058173 Quick Guide English
Reference Codes
Controls
www.weg.net
Power Contactors
C W M 1 2 - 1 0 - 3 0 - V 4 0
Control Relays
C W C A 0 - 2 2 - 0 0 - V 4 0
Note: 1) Configurations with more than 4 auxiliary contacts can be achieved only by adding auxiliary contact blocks.
Overload Relays
Bimetallic Relays
Model Connector links Poles
RW17 1D 2
RW27 2D 3
RW67
RW117
RW317
RW407
R W 1 1 7 - 2 D 3 - U 0 8 0
Solid-State Relays
Model Rated current (A) Code
RWB40 0.4-2 U002
RWM40 1.6-8 U008
RWM112 5-25 U025
RWM420 8-40 U040
RWM840 14-56 U056
28-112 U112
50-250 U250
85-420 U420
170-840 U840
R W B 4 0 - 3 - A 4 U 0 4 0
S R W 0 1 - U C P T 1 E 4 7
M P W 4 0 i - 3 - D 0 6 3
C S W - B F 2
Available
Front type Code
for line
Mushroom C
Illuminated mushroom CI
Illuminated extended SI
Double (CSW) D
Emergency with key EY
Emergency (CSW) EG
Illuminated flush FI
Extended S
Flush (CSW) F
Guarded GA
Emergency stop - pull to release CSW ESP
Emergency stop - turn to release ESG
Emergency stop - key to release ESY
Emergency stop with green position
ESPS
indicator - pull to release
Emergency stop with green position
ESGS
indicator - turn to release
Emergency stop with green position
ESYS
indicator - key to release
Mushroom with latch - turn to release CT
Mushroom with latch - key to release CY
Flush double DF
Extended double DS
Illuminated flush double1) DFI
CSW2
Illuminated extended double1) DSI
Flush triple1) TF
Extended triple TS
Line Code Type Code Release Code Angle Code Flange Code
Default CSW Selector switch C Return R 45 45 No flange WH
Return right RD 90 90 Flange AF3 (old version) Blank
Return left RE
Fixed F
C S W - C K 3 F 4 5 W H
C S W - S D 1 F 3 F V
C S W - B F I
Available Available
Front type Code
for type for line
Angle Code
Signalling
Diffused D 45 45
light
90 90
Lever A
Selector With key Y Only for selector
switch Illuminated knob KI switches
Knob K
Mushroom C
Illuminated mushroom CI
Illuminated extended SI
Double D
Emergency stop
ESY
key to release
Emergency stop CSW ESG
turn to reset (CSW)
Emergency stop
ESP
pull to release (CSW)
Emergency stop with green position
ESPS
indicator - pull to release
Emergency stop with green position
Pushbutton ESGS
indicator - turn to release
Emergency stop with green position
ESYS
indicator - key to release
Illuminated flush FI
Extended S
Flush F
Guarded GA
Flush double DF
Extended double DS
Illuminated flush double1) DFI
CSW2
Illuminated extended double1) DSI
Flush triple1) TF
Extended triple TS
Color Code Qty of blocks Qty of blocks Flange Code Voltage Code Flange Code
White/translucid 0 2NO (BC20) 1NC (BCM01) New flange F 12 V dc 50/60 Hz E25 New flange 3VF
Red 1 1 1 Old version Blank 24 V dc 50/60 Hz E26 Old version Blank
Green 2 2 2 48 V dc 50/60 Hz E27
Yellow 3 3 3 110-130 V dc 50/60 Hz D61
Blue 4 4 0 110-130 V dc C40
Black 5 5 110 V 50/60 Hz D13
Orange 6 0 125 V dc C13
220 V 50/60 Hz D23
220-240 V 50/60 Hz D66
2 - 0 0 2 0 0 0 0 0 F D 6 6 3 F V
D L W - 0 7 D 2 4 P 6 5 - R 2 3
E R W T - M F 1 - 0 2 - M T 1 - E 0 5
Notas:
1) N
ot available for multi-timing models (RTW-M);
2) RTW-ET is available only with two timing options: 3 - 30s (code U030S) and 0.1s - 10min (code MAT);
3) MF1 and MF2 functions available only on multifunction models ERWT;
4) Not available for star-delta models (RTW-ET) and multifunction models (ERWT-MF1, MF2);
5) T iming range 0.1 - 1s (code U001S) is not available for Models RTW-CI, CIR, RD and RDI;
6) Timing ranges 60 - 600s (code U010M) and 3 - 30min (code U030M) are available only for model RTW-RDI;
7) T iming ranges 0.1s - 10min (code MAT) and 0.2s - 150h (code MBT) are available only for models RTW-RE, PE, RD, CIL, CID and ET;
8) Timing range 0.1s - 10 days (code MT1) is available only for multi function models ERWT-MF1 and MF2;
9) E 05 supply voltage available for:
Single timing models: RTW-CI, CIR e RDI
Multi timing models (MAT / MBT): RE, PE, CI, CIL, CIR, CID, RD e ET
Multi function models: MF1 and MF2;
10) Available only for single-timing models.
R P W - F F - D 7 0
R P W - S F - D 7 0
R P W - F S F - D 7 0
R P W - S S M D 2 3
Undervoltage and Power supply system Supply voltage Code Supply voltage Code
overvoltage Blank Three phase 208 V 50/60 Hz D77 400 V 50/60 Hz D34
M Single phase 220 V 50/60 Hz D23 415 V 50/60 Hz D35
230 V 50/60 Hz D24 440 V 50/60 Hz D36
240 V 50/60 Hz D25 460 V 50/60 Hz D38
380 V 50/60 Hz D33 480 V 50/60 Hz D39
R P W - P T C - E 0 5
E R W M - V M 1 - 0 1 - D 9 0
R N W - E N - E 0 9
M D W H 3 - 1 0 0 - 2
S I W - 1 0 0 - 2
R D W 3 0 0 - 1 0 0 - 2
Poles
2
4
D W B 1 6 0 N 2 5 - 3 D F
DWA Line
Type of Breaking capacity at 380-415 V ac Code Shunt release Code Undervoltage release Code
Code
protection 30/35 kA N 24 V ac / V dc E26 24 V dc C03
Distribution DWA 50 kA S 48 V ac / V dc E27 48 V dc C07
Motor protection DWM 65 kA H 60 V ac / V dc E28 125 V dc C13
Generator 110-130 V ac / V dc E10 110-127 V ac D60
DWG
protection
Trip unit Code 220-250 V ac / V dc E15 200-250 V ac D66
Without prot.
IWA Electronic LSI (default None 0 380-415 V ac D70
(switch) E
for DWA1600) None 0
Thermomagnetic
Blank
(default for DWA800)
D W A 8 0 0 H - E 3 2 0 - 3 - 1 6 6 - 2 1 - E 15 - D 6 6
Frame Rated current Poles Operating handle Code Auxiliary contacts BC/AL Code
800 320 22) MR (short) DWA800-1600 166 AL 01
1,600 400 3 MR (long) DWA800-1600 465 BC1 10
420 42) MRI MRI BC1+AL 11
500 None 0 BC2 20
630 BC2+AL 21
700 BC3 30
800 None 0
1,250
1,600
Notes: 1) For IWB switches, please disconsider Breaking capacity and Type of protection.
2) 2 and 4-pole versions under request.
3) DWB400 only.
A C W 1 0 0 H - F M U 2 0 - 3
Switch-Disconnectors
Compact Switch-Disconnectors with Red-Yellow Handle1)
M S W 1 0 0 P - 3 H
Fuse Switch-Disconnectors
F S W 1 0 0 - 3 H
Fuses
gL/gG Fuses - D and NH (Blade Contact) Types
F N H 2 - 6 3 0 U
F N H 3 F E M - 1 0 0 0 Y - A
Type Code
aR A
Note: 1) When selecting the reactive power (kvar) it is important to keep in mind the network frequency and voltage. For further information check the Power
Factor Correction catalogue at www.weg.net.
A B W 1 6 D N 3 - 1 6 A Z 1 F - A 0 2 2 0
Rated Auxiliary contacts Code Motorized Closing coil Code Undervoltage release Code
Code Code
current 5NO+5NC (default) A operator 200~250 V ac/dc (default) 2 None (default) 0
800 A 08 Position auxiliary contacts None (default) 0 No coil 0 100~130 V ac/dc 1
B
1,600 A 16 (for withdrawable version) 100~130 V ac/dc 1 100~130 V ac/dc 1 200~250 V ac/dc 2
2,000 A 20 200~250 V ac/dc 2 24~30 V dc 3 24~30 V dc 3
2,500 A 25 24~30 V dc 3 48~60 V dc 4 48~60 V dc 4
3,200 A 32 48~60 V dc 4 380~480 V dc 5 380~480 V ac 5
4,000 A 40 380 V ac 5 200~250 V ac/dc with delay 6
5,000 A 50 480 V ac 6 100~130 V ac/dc with delay 7
6,300 A 63 48~60 V dc with delay 8
380~480 V ac with delay 9
Protection and measurement unit 2) Code Accessories supplied as standard for the entire range
LSIG + A3) (100~250 V ac/dc, 60 Hz) - default AZ1 Auxiliary contacts (5NO+5NC)
No protection unit 000 Alarm contacts
LSI + A3) (100~250 V ac/dc, 60 Hz) + Earth leakage5) AF1 Opening coil 200-250 V ac/dc
LSI + A3) (100~250 V ac/dc, 50 Hz) + Earth leakage5) AF6 Closing coil 200-250 V ac/dc
LSIG + A3) + Communication (100~250 V ac/dc, 60 Hz) AC1 Operation counter
LSIG + A3) + Communication (100~250 V ac/dc, 50 Hz) AC6 Position locking with padlock (padlock not included) -
LSIG + A3) + Communication 24~60 V dc AC2 withdrawable version only
LSIG + M4) + Communication (100~250 V ac/dc, 60 Hz) PC1 Position indicator (inserted /test/ withdrawn) -
withdrawable version only
LSIG + M4) + Communication (100~250 V ac/dc, 50 Hz) PC6
LSIG + V + A3) + Communication 24~60 V dc PC2
LSIG + A3) 24~60 V dc AZ2
LSIG + A3) (100~250 V ac/dc, 50 Hz) AZ6
Notes: 1) To be used with circuit breakers that have protection units type AC or PC.
2) For further information about protection units, check the catalogue at WEG website.
3) A - Current measurement.
4) M - Current, voltage, power and frequency measurements.
5) The current transformer ABW-ZCT must be used for earth leakage protection (supplied as accessory).
For those countries where there is not a WEG own operation, find our local distributor at www.weg.net.
Cod: 50058173 | Rev: 03 | Date (m/y): 06/2015