Professional Documents
Culture Documents
Dow Thermal Phase Change
Dow Thermal Phase Change
Solutions
Heat Sink
PCM-250
Heat Spreader
Authorized Distributor
1-800-448-0406
PCM-250 PROPERTY VALUE
A thermally conductive Color Teal
phase change material, that ~
melts at temperatures
Viscosity (Poise or dPa-s) ~ 10m Poise <50C / 1M Poise >50C
above 50C and Specific Gravity 3.1
provides complete wet out
CTE (ppm/C) 22
of the interface. PCM-250
is ideal for use between a Thermal Conductivity @ 90C >7 W/mK
hot device and a Heatsink,
Thermal Resistance 0.24 K-cm2/W @ 115 micron bondline thickness
Fansink or Heat Pipe
assembly, where mechanical Volume Resistivity 25C/90C 3.3E15 Ohm-cm/2.6E14 Ohm-cm
fastening is required. It is Filler Alumina/Aluminum Mesh
easily processed at temper-
atures > 50C. Maximum filler size 40 Microns
PCM-250 exhibits a Flammability 94V 0 (Internal Testing Only)
Thermal Resistance of .24
K-cm2/W and Thickness before assembly 150 Microns (6 Mils)
an effective thermal
conductivity of > 7W/mK.
Heatsink
Reworkability
High manufacturing yields
and low maintenance cost.
1-800-448-0406
cific, duly signed endorsement of fitness for use.
Dow Corning disclaims liability for any incidental or consequential damages. Suggestions of use shall
not be taken is inducements to infringe any patent.