Professional Documents
Culture Documents
000 050e 12.13
000 050e 12.13
Description
The measured pressure acts through the diaphragm on the
quartz crystal measuring element, which transforms the
pressure p (bar) into an electrostatic charge Q (pC = pico
Coulomb).
The connector is welded to the body, but its fluoropolymer Range bar 0 ... 250
insulator is not absolutely tight. Calibrated partial ranges bar 0 ... 25
bar 0 ... 2,5
Application Overload bar 400
The quartz pressure sensor Type 701A is suited for dynamic Sensitivity pC/bar 80
pressure measurements. For very high frequencies or reduced Natural frequency kHz 70
mounting space the sensor Type 601 is used. Linearity %FSO <0,5
Acceleration sensitivity bar/g <0,001
Operating temperature range C 150 ... 200
Temperature coefficient of sensitivity C1 <104
Insulation resistance at 20 C 1013
Shock resistance g 5 000
Capacitance pF 9
Weight g 8,5
Connector, fluoropolymer insulator KIAG 10-32
Page 1/2
This information corresponds to the current state of knowledge. Kistler reserves 1995 ... 2013, Kistler Group, Eulachstrasse 22, 8408 Winterthur, Switzerland
the right to make technical changes. Liability for consequential damage resulting Tel. +41 52 224 11 11, Fax +41 52 224 14 14, info@kistler.com, www.kistler.com
from the use of Kistler products is excluded. Kistler is a registered trademark of Kistler Holding AG.
Piezoelectric Pressure Sensor High Sensitivity Pressure Range 250 bar, Type 701A
Ordering Code
Piezoelectric pressure sensor Type 701A
high sensitivity, pressure range 250 bar