To reset the machine's memory to factory defaults, enter the 25 mode by powering on while pressing 2 and 5. Select software SW and set address 3-4 to OFF. Power off and on in 47 mode by pressing 4 and 7 during startup. Enter several number sequences including 92, 096, and 093 before power cycling to complete the reset and delete all stored data.
To reset the machine's memory to factory defaults, enter the 25 mode by powering on while pressing 2 and 5. Select software SW and set address 3-4 to OFF. Power off and on in 47 mode by pressing 4 and 7 during startup. Enter several number sequences including 92, 096, and 093 before power cycling to complete the reset and delete all stored data.
To reset the machine's memory to factory defaults, enter the 25 mode by powering on while pressing 2 and 5. Select software SW and set address 3-4 to OFF. Power off and on in 47 mode by pressing 4 and 7 during startup. Enter several number sequences including 92, 096, and 093 before power cycling to complete the reset and delete all stored data.
How to reset the machine, initialize memory to factory defaults.
Solution To reset memory to factory defaults, perform the following: 1. Enter the 25 mode (power the machine ON, while pressing the 2 and 5 keys). 2. Select Software SW. 3. Using the up/down arrows, scroll to address 3-4 (All Memory Reset). 4. Select OFF. 5. Power the machine OFF. 6. Enter the 47 mode (turn the machine ON, while pressing the 4 and 7 keys). 7. Enter 9, 2, press the START key, press the STOP/CLEAR key. 8. Enter 0, 9, 6, press the START key, press the STOP/CLEAR key. 9. Enter 0, 9, 3, and press the START key. 10. Power the machine OFF/ON. Note: When the memory board is initialized, all data is deleted. hi guys go to 25 next sw look for 16-3 turn it 0 and off and on the machine.that note will disapeare