Professional Documents
Culture Documents
1994 Volvo 850 Power Steering 2.4L
1994 Volvo 850 Power Steering 2.4L
4. Assemble reservoir and pump Use new O-ring. Ensure that locking tabs are
seated securely.
Top of Form Top of Form
5. Install pump:
a. Place protective paper over generator (pump may still contain fluid).
b. Install mounting bolts (five). Tighten to 25 Nm (18 ft. lbs.) .
c. Install guard plate bolt and spacer sleeve. Tighten to 25 Nm (18 ft.
lbs.) .
d. Tighten guard plate lower mounting to25 Nm (18 ft. lbs.) .
6. Install/reconnect:
a. Return and pressure hoses. Fit new O-ring on pressure hose.
b. Clip securing hoses to dipstick tube.
c. Coolant hose.
Top of Form Top of Form
7. Install:
a. Pump drive belt.
b. Cooling-air hose to control module box.
8. Top up with coolant.
9. Fill power steering reservoir with fluid and bleed system.
a. Turn steering wheel repeatedly from lock to lock and top up fluid as
required.
b. Lower car.
c. Apply parking brake and start engine.
d. Check fluid level while bleeding system as described below.
• A. Turn steering wheel slowly to right and hold in limit position for 10
seconds.
• B. Turn steering wheel slowly to left and hold in limit position for 10
seconds.
e. Repeated steps A and B 20 times. Move car after 10 times to avoid
damage to tires.