Professional Documents
Culture Documents
Data Sheet: General Purpose Chip Resistors
Data Sheet: General Purpose Chip Resistors
Data Sheet: General Purpose Chip Resistors
Product specification Jan 05, 2011 V.6 Supersedes Date of Mar. 06, 2003
Product specification 2
9
Chip Resistor Surface Mount RC SERIES 0402
RC0402 X R - XX XXXX L
APPLICATIONS (1) (2) (3) (4) (5) (6)
All general purpose application
(1) TOLERANCE
F = 1%
FEATURES J = 5% (for Jumper ordering, use code of J)
Halogen Free Epoxy
(2) PACKAGING TYPE
RoHS compliant
R = Paper / PE taping reel
- Products with lead free
terminations meet RoHS (3) TEMPERATURE COEFFICIENT OF RESISTANCE
requirements
= Base on spec
- Pb-glass contained in electrodes,
resistor element and glass are (4) TAPING REEL
exempted by RoHS
07 = 7 inch dia. Reel
Reducing environmentally 7D = 7 inch dia. Reel, 2 x Standard Quantity
hazardous wastes 10 = 10 inch dia. Reel
High component and equipment 13 = 13 inch dia. Reel
reliability
(5) RESISTANCE VALUE
Saving of PCB space
There are 2~4 digits indicated the resistance value. Letter R/K/M is decimal point, no
None forbidden-materials used
need to mention the last zero after R/K/M, e.g.1K2, not 1K20.
in products/production
Detailed resistance rules show in table of Resistance rule of global part number.
www.yageo.com
Jan 05, 2011 V.6
Product specification 3
9
Chip Resistor Surface Mount RC SERIES 0402
For detailed information of GLOBAL PART NUMBER and ordering example, please refer to page 2.
12NC CODE
The ordering code of a RC32 resistor, value 56 X with 1% tolerance, 33 KX = 3303 or 333
supplied in tape of 10,000 units per reel is: 232270675609L or 10 MX = 1006 or 106
RC0402FR-0756RL.
NOTE
1. All our RSMD products meet RoHS compliant and Halogen Free. "LFP" of the internal 2D reel label mentions "Lead Free Process"
2. On customized label, "LFP" or specific symbol can be printed
www.yageo.com
Jan 05, 2011 V.6
Product specification 4
9
Chip Resistor Surface Mount RC SERIES 0402
MARKING
RC0402
ynsc007
No marking
Fig. 1
For further marking information, please see special data sheet Chip resistors marking
CONSTRUCTION
The resistor is constructed on top OUTLINES
of a high-grade ceramic body. For dimension see Table 1
Internal metal electrodes are added overcoat
on each end to make the contacts to
Primary glass layer
the thick film resistive element. The
resistive layer
composition of the resistive element (Jumper chip is a conductor)
YNSC056
DIMENSIONS L
Table 1
TYPE RC0402
Fig. 2 Chip resistor outlines
L (mm) 1.00 0.05
W (mm) 0.50 0.05
H (mm) 0.35 0.05
I1 (mm) 0.20 0.10
I2 (mm) 0.25 0.10
www.yageo.com
Jan 05, 2011 V.6
Product specification 5
9
Chip Resistor Surface Mount RC SERIES 0402
FUNCTIONAL DESCRIPTION
POWER RATING
handbook, halfpage
RC0402 rated power at 70C is 1/16 W
P MLB206_2
(%Prated )
RATED VOLTAGE 100
Where
V=Continuous rated DC or Fig. 3 Maximum dissipation (P) in percentage of rated power as a
function of the operating ambient temperature (Tamb)
AC (rms) working voltage (V)
P=Rated power (W)
R=Resistance value (X)
www.yageo.com
Jan 05, 2011 V.6
Product specification 6
9
Chip Resistor Surface Mount RC SERIES 0402
Where
t1=+25 C or specified room temperature
t2=55 C or +125 C test temperature
R1=resistance at reference temperature in ohms
R2=resistance at test temperature in ohms
Life/Endurance IEC 60115-1 4.25.1 At 705 C for 1,000 hours, RCWV applied for (1.0%+0.05 ) for 1% tol.
1.5 hours on, 0.5 hour off, still air required (3.0%+0.05 ) for 5% tol.
<100 m for Jumper
High IEC 60068-2-2 1,000 hours at 1555 C, unpowered (1.0%+0.05 ) for 1% tol.
Temperature (2.0%+0.05 ) for 5% tol.
Exposure/
<50 m for Jumper
Endurance at
Upper Category
Temperature
Moisture MIL-STD-202G Method-106G Each temperature / humidity cycle is defined at 8 (0.5%+0.05 ) for 1% tol.
Resistance hours, 3 cycles / 24 hours for 10d. with 25 C / (2.0%+0.05 ) for 5% tol.
65 C 95% R.H, without steps 7a & 7b,
<100 m for Jumper
unpowered
Parts mounted on test-boards, without
condensation on parts
Measurement at 242 hours after test conclusion
Short Time IEC60115-1 4.13 2.5 times of rated voltage or maximum overload (1.0%+0.05 ) for 1% tol.
Overload voltage whichever is less for 5 sec at room (2.0%+0.05 ) for 5% tol.
temperature
<50 m for Jumper
No visible damage
www.yageo.com
Jan 05, 2011 V.6
Product specification 7
9
Chip Resistor Surface Mount RC SERIES 0402
Low IEC 60068-2-1 The resistor shall be subjected to a DC rated (0.5%+0.05 ) for 1% tol.
Temperature voltage for 1.5 h-on, 0.5 h-off, at -553 C (1.0%+0.05 ) for 5% tol.
Operation This constitutes shall be repeated for 96 hours No visible damage
However the applied voltage shall not exceed
the maximum operating voltage
Dielectric IEC 60115-1 4.7 Maximum voltage (Vrms) applied for 1 minute No breakdown or flashover
Withstand Type RC0402
Voltage
Voltage (AC) 100 Vrms
Noise IEC 60115-1 4.12 Maximum voltage (Vrms) applied Resistors range Value
R < 100 10 dB
100 R < 1 K 20 dB
1 K R < 10 K 30 dB
10 K R < 100 K 40 dB
100 K R < 1 M 46 dB
1 M R 22 M 48 dB
Humidity IEC 60115-1 4.21 Steady state for 1000 hours at 40 C / 95% R.H. (1.0%+0.05 ) for 1% tol.
RCWV applied for 1.5 hours on and (2.0%+0.05 ) for 5% tol.
0.5 hour off
<100 m for Jumper
www.yageo.com
Jan 05, 2011 V.6
Product specification 8
9
Chip Resistor Surface Mount RC SERIES 0402
Solderability
- Wetting IPC/JEDEC J-STD-002B test B Electrical Test not required Well tinned (95% covered)
Magnification 50X No visible damage
SMD conditions:
1st step: method B, aging 4 hours at 155 C
dry heat
2nd step: lead-free solder bath at 2453 C
Dipping time: 30.5 seconds
- Leaching IPC/JEDEC J-STD-002B test D Lead-free solder, 260 C, 30 seconds No visible damage
immersion time
www.yageo.com
Jan 05, 2011 V.6
Product specification 9
9
Chip Resistor Surface Mount RC SERIES 0402
REVISION HISTORY
REVISION DATE CHANGE NOTIFICATION DESCRIPTION
Version 6 Jan 05, 2011 - - Typo updated
Version 5 Apr 27, 2010 - - Updated test items and methods
- Add new taping reel code of 7 inch dia. reel with double standard
quantity (20,000 units per reel)
Version 3 Jul 15, 2008 - - Change to dual brand datasheet that describe RC0402 with RoHS
compliant
- Description of "Halogen Free Epoxy" added
- Define global part number
Version 2 Sep 03, 2004 - - New datasheet for 0402 thick film 1% and 5% with lead-free terminations
- Replace the 0402 part of pdf files: RC01_11_21_31_5,
RC02_12_22_32_10
- Test method and procedure updated
- PE tape added (paper tape will be replaced by PE tape)
Yageo reserves all the rights for revising the content of this datasheet without further notification, as long as the products itself are unchanged. Any
product change will be announced by PCN.
www.yageo.com
Jan 05, 2011 V.6