Professional Documents
Culture Documents
Tds Hydrodrain 2016
Tds Hydrodrain 2016
1. Product Name
Eliminates the bulk and weight of one or both sides.
Hydrodrain conventional aggregate type drainage Hydrodrain 400, 420, 700, and 990
media consists of an impermeable polypropylene
2. Product Description Materials are resistant to all known sheet, containing 12.5% post-industrial
Basic Use naturally occurring earth salts and recycled content formed under heat and
Hydrodrain is a composite drainage minerals pressure to produce a high-flow dimple-
layer consisting of a three-dimensional The white filter fabric (Hydrodrain 300, type drainage core with woven or non-
drainage core and a filter fabric. The 302 and 1000) reduces the potential woven filter fabric bonded to one side.
filter fabric is bonded to the core, heat build up underneath the drainage
preventing intrusion of the fabric into the layer decreasing the potential for Types
flow channels. The fabric extends equally STYROFOAM insulation deformation. Hydrodrain 300 is a geonet-type core
(approx. 2") along both long sides, with non-woven white filter fabric bonded
beyond the core for overlap adjoining Limitations to one side. The filter fabric retains
rolls. Hydrodrain is ideal anywhere a Hydrodrain is not to be used as the soil or sand particles as well as freshly
subsurface drainage course is required. sole protection for Hydrotech roofing and placed concrete allowing filtered water
Typical applications include foundation waterprpofing materials to pass through to the drainage core.
walls, trench drains, planters, plaza decks Hydrodrain is not to be set directly Hydrodrain 300 is primarily installed
and roof assemblies. into or over Hydrotechs Monolithic horizontally for areas subjected to heavy
Membrane 6125 without the installation loading or vehicular traffic but may also
Advantages of a protection course be installed vertically. Hydroflex 30 or
Reduces hydrostatic pressure on below- another approved protecting layer must
grade structures Composition and Materials be installed over Hydrotechs roofing and
Enhances conventional waterproofing Hydrodrain 300, 302 and 1000 waterproofing membranes if Hydrodrain
systems by transmitting water into a consist of a heavy duty, high density 300 is installed above.
collection system before it reaches the wall polyethylene geonet-type drainage core,
substrate containing 10% post-industrial recycled Hydrodrain 302 is identical to
Decreases the risk of potential freeze-thaw content, with a non-woven white filter Hydrodrain 300 with the addition of a
damage to a concrete wearing surface fabric heat fused to the core ridges on second layer of the non-woven white filter
PH Y SI CAL PROPE RTIE S (Ta b le 1 )
Compressive Strength ASTM D1621 psf 40,000 40,000 40,000 15,000 15,000 21,000 30,000
(kN/m2) (1,915) (1,915) (1,915) (718) (718) (1,005) (1,436)
Fabric Grab ASTM D4632 lb 95 95 95 100 100 MD 370 (1.65) MD 370 (1.65)
Tensile Strength (kN) (.423) (.423) (.423) (0.45) (0.45) CD 250 (1.11) CD 250 (1.11)
Fabric Puncture Strength ASTM D4833* lb 55* 55* 55* 250 250 850 850
ASTM D6241 (kN) (0.245) (0.245) (0.245) (1.113) (1.113) (3.78) (3.78)
Roll Weight 70 lbs 80 lbs 55 lbs 39 lbs 40.5 lbs 50 lbs 52 lbs
300 302 1000
Fig. 2
Fig. 3
GRADE
6"
Fig. 4 Fig. 5
The information given is based on data and knowledge considered to be true and correct and is offered for the users consideration, investigation and verification.
2016 AMERICAN HYDROTECH INC. The information is subject to change without notice. The determination of suitability and fitness of the products and the application described herein for a particular
purpose is the sole responsibility of the user. Please read all statements, recommendations and suggestions in conjunction with the conditions of sale which apply to
all goods sold by American Hydrotech, Inc. for the United States and abroad, or Hydrotech Membrane Corporation for Canada, including the express disclaimer
2016-TDS-3-HDRAIN-JS by each company of the implied warranties of merchantability or fitness for a particular purpose. Nothing stated herein is intended to infringe on any patent or
copyright.