Professional Documents
Culture Documents
MeasurIT OilSpy Extended Brochure 1003
MeasurIT OilSpy Extended Brochure 1003
MeasurIT OilSpy Extended Brochure 1003
Membrane
Principle
This OilSpy membrane is the sensor of the detector.
When the membrane comes into contact with a thin oil layer floating on
the surface of the water, the membrane dissolves and tears like a fuse.
Specifications
High technology polymer membrane, stable to natural atmospheric
influences.
Recommended operating time: 6 months.
Storage time in its package hermetically closed: 1 year.
Interchangeable membrane delivered in a pack of ten (light-tight box).
Stocking conditions
- Protected from light and humidity
- Temperature between 10 and 30°C
- Protected from hydrocarbons
Current loop
Power supply: 250 mA/9V max,
Electrical interface: By a gland and a 3 contacts connection terminal
Cable length: up to 1000 meters
Radio
Power supply: 9V battery
Radio frequency: 434 MHz, power <10mW
Range: up to 300 meters at sight
Slide
The slide is used with the explosion proof hydrocarbons membrane holder OilSpy. It allows the use of the membrane
holder in space restricted sites with variable water level:
- decantation basin
- collector
- output canal
- aqueduct.
Specifications
Water level variation: +/- 70 cm around a medium level in a 2 meters standard version
(other lengths available upon request),
Material: Stainless steel
Fixation: By way of 2 mountings, high and low,
option: 100 kg ballast (recommanded when access to the lower mounting is difficult)
The design makes this buoy well adapted to moving water such
as rivers or basins:
- 3 floats at 120° allowing a good stability of the OilSpy detector,
- a simple mechanical structure with a quick clipping device to
allow easy membrane replacements.
Coastal buoy
The oil spill detection system is always in contact with the water
surface.
Thanks to its design, this buoy is well adapted to moving waters and
can accommodate waves up to 1 meter high.
Coastal buoy
well adapted to moving waters and can ac-
commodate waves up to 1 meter high
VARINIVO
The VARINIVO system is recommended for heavy hydrocarbons
and chlorous solvent.
Piezometer
The OilSpy ADF Piezo membrane holder is used to monitor
groundwater tables as well as variable water level installation
where space restrictions do not allow the use of buoys or slides.
VARINIVO
for heavy hydrocarbons and chlorous solvent
Characteristics
Weight: 1,5 kg
Operating temperature: 0°C / +50°C
Protection: IP 67
Power supply: 220 VCA, 9VCC, 50/60 Hz
Dimensions: 200x130x55 mm
Configuration
The OilSpy alarm station centralizes the alarms from the OilSpy current loop and the OilSpy radio.
OilSpy Radio:
- up to 45 OilSpy by OilSpy radio receiver.
OILSPY Multiplexer
The multiplexer OilSpy can connect up to 5 OilSpy current loop standard to OilSpy alarm station.
The multiplexers and the connected detectors are applied with the alarm station. The communication operates thanks to a
12 conductors cable.
Characteristics
Weight: 600 g
Material: Polyurethane
Connection: Connecteur Binder femelles:
3 at 12 points
Dimensions: 200 x 80 x 40 mm
LEVEL MEASUREMENTS
We provide a complete family of point and continu-
SERVICES: ous level products including magnetically coupled level
Flowmeter HIRE-easy to use, non-invasive gauges, magnetostrictive level transmitters, laser trans-
mitters, guided wave radar transmitters and ultrasonic
ON-SITE flow measurements transmitters.
Flowmeter DEMO - see how to do it!
pH SENSORS
BAT pH probes feature Axial Ion Path
VALVES: reference cell, insuring the longest
SINGER water control valves, PRVs possible life in the harshest of chemical
environments:
Knife gate valves - resistance to poisoning by way of long-
Penstocks er Ion Paths and natural wood spools,
- reduced electrode breakage,
Pinch valves - heavy duty - longer reference life due to a greater
WATERFLEX check valves volume of concentrated electrolyte.
Duckbill TIDEFLEX check valves
TIDEFLEX water mixing systems THERMAL ENERGY FLOWMETERS
TIDEFLEX effluent diffusers BTU Energy Meter combines the attributes of non-
intrusive ultrasonic ow measurement with superior
Stormwater flow regulators
temperature measurement into an integrated
VORTAB flow conditioners energy computer.
Rubber expansion joints
PROCESS ANALYZERS
PIOX S can be used to control concentration of
SENSORS: solutions or to monitor chemical
reactions such as polymerization, crystallization,
Level gauges, switches, transmitters
neutralization, phase separation.
Flowmeters - wide range of applications PIOX can help you to optimize your process!
Thermal energy meters
Flow switches
TESTO MEASUREMENT INSTRUMENTS
Pressure & temperature switches We offer an extensive range of instruments
Pressure sensors for the industry:
- temperature, pressure, humidity,
Concentration / density analyzers
RPM, sound measurements,
Refractometers - thermal imaging,
pH sensors - data loggers, wireless monitoring,
- emission analysis,
Suspended solids & turbidity sensors - multi-function instruments,
Diary product spill monitors - calibration services.
OilSpy oil spill detectors
Humidifiers
MeasurIT Technologies Ltd. distribute and support valves and sensors
Dehumidifiers
for industries such as Pharmaceutical, Biotechnology,
Humidity, temp., lux radio monitoring
Food & Beverage, Power Generation, Mining, Water & Wastewater.
TESTO measurement instruments
Calibrators
Our products continue to serve demanding industrial applications since 1995.
email: info@measurIT.com
www.measurIT.com