Professional Documents
Culture Documents
ADSL/ISDN Initial Checking - Troubleshooting 1) Backup ADSL Up
ADSL/ISDN Initial Checking - Troubleshooting 1) Backup ADSL Up
1) Backup ADSL Up
TSEIP-PRP-CE01-SR01.PEG>show ip int brief
Interface IP-Address OK? Method Status Protocol
Embedded-Service-Engine0/0 unassigned YES NVRAM administratively down down
GigabitEthernet0/0 192.168.48.1 YES NVRAM up up
GigabitEthernet0/1 unassigned YES NVRAM administratively down down
ATM0/0/0 unassigned YES NVRAM up up
ATM0/0/0.1 unassigned YES unset up up
Ethernet0/0/0 unassigned YES NVRAM administratively down down
Serial0/2/0 58.139.49.178 YES NVRAM up up
Dialer1 27.146.136.59 YES IPCP up up
Virtual-Access1 unassigned YES unset up up
TSEIP-PRP-CE01-SR01.PEG>
-ATM interface up
-Dialer must have IP address.
3) Backup ISDN Up
STOTO-217-CE01-MC901>show ip int brief
Interface IP-Address OK? Method Status Protocol
FastEthernet0/0 10.3.30.10 YES NVRAM up up
FastEthernet0/1 172.28.30.96 YES NVRAM up up
Serial0/0/0 114.133.56.186 YES NVRAM up up
BRI0/1/0 unassigned YES NVRAM up up
BRI0/1/0:1 unassigned YES unset down down
BRI0/1/0:2 unassigned YES unset down down
Dialer1 unassigned YES IPCP standby mode down
Loopback0 10.250.3.30 YES NVRAM up up
Loopback100 10.251.3.30 YES NVRAM up up
Loopback101 100.250.3.30 YES NVRAM up up
Tunnel100 172.17.31.96 YES NVRAM up up
Tunnel101 172.16.31.96 YES NVRAM up up
STOTO-217-CE01-MC901>sh isdn stat
Global ISDN Switchtype = basic-net3
ISDN BRI0/1/0 interface
dsl 2, interface ISDN Switchtype = basic-net3
Layer 1 Status:
ACTIVE
Layer 2 Status:
TEI = 64, Ces = 1, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED
Layer 3 Status:
0 Active Layer 3 Call(s)
Active dsl 2 CCBs = 0
The Free Channel Mask: 0x80000003
Total Allocated ISDN CCBs = 0
STOTO-217-CE01-MC901>
#ISDN trigger (Dialaer must have IP) when Leased line down.
-WAN-