Professional Documents
Culture Documents
List of Abbreviations
List of Abbreviations
List of Abbreviations
and terms
Application Sheet
ComAp a. s.
Copyright 2007 ComAp a. s. Kundratka 2359/17, 180 00 Praha 8, Czech Republic
Prague, Czech Republic Tel: +420 246 012 111, Fax: +420 246 316 647
E-mail: info@comap.cz, www.comap.cz
Abbreviation/term Description
Setting of setpoints (with this character in front of them) is shared
#
between controllers via intercontroller CAN2
ADN Archive Drive Nano
AFR Air Fuel Ratio - method of control of lean burn gas engines
AFS AFR algorithm for stoichiometric gas engines
AirGate - connection technology to make access to the internet as simple
AG
as possible
Alarmlist&History Indication - protection type (see InteliGen/InteliSys
AHI
Reference Guide for details)
AI Analog Input
AIC InteliCompact New Technology archive file
AID Archive ID-DCU
AIL InteliLite and InteliLite New Technology archive file
AIM Archive ID-Mobile
AIP InteliPro archive file
Alarmlist Indication - protection type (see InteliGen/InteliSys Reference
ALI
Guide for details)
AMF Auto Mains Failure (controller starts automatically on mains failure)
IG/IS-NT archive file (contain setpoints, values, history and configuration
ANT
saved from the particular controller)
AO Analog Output
AS All Speed application in ID-DCU and ID-Mobile controllers
Archive Set - file created by InteliMonitor, contain links to archives from
AST
all active gensets of the site which were saved at the same time
Automatic Transfer Switch (switches load to supplied bus (by mains or
ATS
generators))
AVR Automatic Voltage Regulator
Base Box - controller unit mounted inside of switchboard (without built-in
BB
display)
BiFuel / DualFuel - engine operation using combination of both diesel and
BF
gas
BI Binary Input
Baseload - gen-set power control mode which keeps constant power
Bld
supply to the load
BO Binary Output
Breaker Open & Cool-down - protection type (see InteliGen/InteliSys
BOC
Reference Guide for details)
BTB Bus-Tie Breaker
C/O Close/Open
CAN bus for ComAp extension modules (e.g. IGS-PTM) and engine ECU
CAN1
connection (also called peripheral CAN bus)
CAN bus for communication between ComAp controllers and
CAN2 communication modules connection (e.g. I-LB+) (also called
intercontroller CAN bus)
CB Circuit Breaker
Cfg Controller configuration
Application for Complex Systems where actions are taken by a PLC and
COX
controller only follows orders => needs an external driver (cox)
CT Current Transformer
Dynamic Data Exchange (DDE server - communication server for most
DDE
ComAp controllers)
Del Delay
Controled reduction of gen-set(s) power based on relevant value, e.g.
Derating
temperature
Dynamic Host Configuration Protocol - network protocol used to
configure devices that are connected to a network (known as hosts) so
DHCP they can communicate on that network using the Internet Protocol (IP)
ID-SCM1 Speed Control Module for InteliDrive controllers (cost effective version)
VAr Sharing - ensures VAr sharing between gen-sets on site via the CAN2
VS
bus (for island parallel or mains parallel operation of multiple gen-sets)
VT Voltage Transformer
WRN Warning
WebSupervisor - cloud based system for monitoring and controlling of
WSUP
ComAp controllers through web
Zipped Archive Set - file created by InteliMonitor, can be used for sending
ZST
of complete archive sets to the ComAp technical support