Professional Documents
Culture Documents
Vertu RHV3-RHV5 User Manual
Vertu RHV3-RHV5 User Manual
Reproduction, transfer, distribution or storage of part or all of the contents in this document in any form without the prior written permission
of Vertu is prohibited. Vertu operates a policy of continuous development. Vertu reserves the right to make changes and improvements to
any of the products described in this document without prior notice.
Under no circumstances shall Vertu be responsible for any loss of data or income or any special, incidental, consequential or indirect
damages howsoever caused.
The contents of this document are provided as is. Except as required by applicable law, no warranties of any kind, either expressed or
implied, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose, are made in relation to
the accuracy, reliability or contents of this document. Vertu reserves the right to revise this document or withdraw it at any time without prior
notice.The availability of particular products may vary by region. Please check with Vertu Concierge.
Vertu and the V logo are registered trademarks or trademarks. Other product and company names mentioned herein may be trademarks or
registered trademarks of their respective owners.
US Patent No 5818437 and other pending patents. T9 text input software copyright 1997-2002. Tegic Communications, Inc. All rights
reserved.
Includes RSA BSAFE cryptographic or security protocol software from RSA Security.
EXPORT CONTROLS
Your Vertu phone may contain commodities, technology, or software exported from the United States in accordance with the Export
Administration regulations. Diversion contrary to U.S. law is prohibited.
DECLARATION OF CONFORMITY
We, Vertu declare under our sole responsibility that the products, Model Ascent, types RHV-3 and RHV-5 are in conformity with the
provision of the following Council Directive: 1999/5/EC.
A copy of the Declaration of Conformity can be found at http://www.vertu.com
168
ii
WELCOME
iii
ABOUT THIS MANUAL CONVENTIONS
To ensure that you are reading the most recent The following conventions are used in this
version of this manual, we suggest that you visit the Reference Manual:
Vertu.com website and download the latest M enu Represents text that appears
version. Alternatively you can contact Vertu on your Vertu phones display,
Concierge to obtain the most recent CD-ROM or for example, From the
request a printed copy. stand-by display,
GLOSSARY OF TERMS press M enu .
The following terms are used in this Reference SEND Represents a Vertu phone
Manual: key, for example, Press the
S E N D key to make the call.
NUMBER k e y s The keys that are used to
enter (key in) text or numbers. Caution. Important information
relating to safety.
iv
IMPORTANT INFORMATION SAFETY POINTS
Caution. Do not switch on the phone when
The wireless phone described in this guide is wireless phone use is prohibited or when it may
approved for use on GSM 900/1800/1900 cause interference or danger. Please read these
networks for models purchased in Europe and simple guidelines. Disregarding these rules may
Asia, and GSM 850/1800/1900 networks for be dangerous or illegal.
models purchased in the USA. Contact your
service provider for more information about Your Vertu phone has an internal antenna. As with
networks. any other radio transmitting device, do not touch
the antenna unnecessarily when the phone is
When using your Vertu phone, obey all laws and switched on.
respect the privacy and legitimate rights of others.
Contact with the antenna affects call quality and
Warning. All of your Vertu phones features, other
than the alarm clock, require the phone to be
may cause the phone to operate at a higher power
switched on to use the features. Do not switch level than otherwise needed. Avoiding contact with
your Vertu phone on when wireless phone use the antenna during a call optimises the antenna
may cause interference or danger. performance and the talk time of your Vertu phone.
NETWORK SERVICES Your Vertu phone and its accessories may contain
small parts. Keep them out of reach of small
To use the phone you must have service from a children.
wireless service provider. Many of the features in
your Vertu phone depend on features in the
wireless network to function. These network
services may not be available on all networks or
you may have to make specific arrangements with
your service provider before you can utilise
network services. Your service provider may need
to give you additional instructions for their use and
explain what charges will apply. Some networks
may have limitations that affect how you can use
network services. For instance, some networks
may not support all language-dependent
characters and services.
Your service provider may also have requested that
certain features be disabled or not activated in your
Vertu phone. If so, they will not appear on your
menus. Contact your service provider for more
information.
SHARED MEMORY
Some of the data features in your Vertu phone
share memory. Using one or more of these features
may reduce the memory available for the remaining
features sharing memory. For example, saving
many multimedia messages and voice recordings
may use all of the available memory. Your phone
may display a message that the memory is full
when you try to use a shared memory feature. In
this case, delete some of the information or entries
stored in the shared memory features before
continuing. Some of the features, such as the
contacts list, have a certain amount of memory
specially allotted to them in addition to the amount
of memory shared with other features.
v
ROAD SAFETY COMES FIRST Obey all local laws. Always keep your hands
free to operate the vehicle while driving. Your
first consideration while driving should be road
safety.
SWITCH OFF WHEN REFUELLING Do not use the phone at a refuelling point. Do
not use near fuel or chemicals.
SWITCH OFF NEAR BLASTING Do not use the phone where blasting is in
progress. Observe restrictions and follow any
regulations.
CONNECTING TO OTHER DEVICES When connecting to any other device, read its
user guide for detailed safety instructions. Do
not connect incompatible devices.
vi
TABLE OF CONTENTS
vii
05 PROFILES AND SETTINGS 07 ADDITIONS
35 > PROFILES 51 > GALLERY
35 > ACTIVATING A PROFILE 51 > FOLDERS
35 > PERSONALISING A PROFILE 52 > FOLDER FILES
36 > RENAMING A PROFILE 52 > MEDIA
36 > SETTINGS 52 > MEDIA PLAYER
36 > TIME AND DATE SETTINGS 53 > VOICE RECORDER
37 > PERSONAL SHORTCUTS 53 > MEDIA EQUALISER
37 > CONNECTIVITY 54 > APPLICATIONS
38 > CALL SETTINGS 54 > COLLECTION APPLICATIONS
39 > PHONE SETTINGS 55 > EXTRAS
41 > SECURITY SETTINGS 55 > WEB
41 > RESTORE FACTORY SETTINGS
08 ACCESSORIES
06 CONTACTS
56 > HEADSET
42 > CONTACTS MEMORY
57 > CHARGER
42 > PHONE MEMORY
57 > CHARGING YOUR BATTERY
42 > SIM CARD MEMORY
57 > BATTERY
42 > SELECTING THE MEMORY TYPE
59 > BATTERY INFORMATION
42 > COPYING BETWEEN MEMORIES
43 > COPYING OPTIONS
59 > VEHICLE CHARGER
viii
68 > CREATING A TO-DO LIST
68 > DELETING A TO-DO LIST
68 > NOTES
68 > CREATING NOTES
68 > VIEWING NOTES
69 > EDITING NOTES
69 > DELETING NOTES
69 > SENDING NOTES
69 > SYNCHRONISATION
69 > SYNCHRONISING FROM YOUR PHONE
70 > SYNCHRONISATION SETTINGS
ix
01 GETTING STARTED
> 02 Earpiece.
05 05
> 07 SEND key press to make or
answer a call.
07 06 08
> 11 Microphone.
11
12
> 12 Accessories connector.
1
THE BATTERY AND SIM CARD
02
05
> With the back of your Vertu phone facing you, 06
position the back cover release key (01) very
carefully into the slot of the locking screw (02).
Ensure the key does not slip out of the slot.
03 > Insert the SIM card into the retainer, ensuring that
the bevelled corner (06) is located bottom left and
the gold contact area is facing towards the gold
contact points inside the phone.
> Return the retainer to its original position and slide
it towards the top of the phone. The retainer
should firmly lock into place.
For availability and information on using SIM
> Turn the locking screw (02) a quarter of a turn card services, contact your SIM card vendor.
anticlockwise, gently pivot (by no more than 45 This may be the service provider, network
degrees) and lift off the back cover (03) towards operator, or other vendor.
you as shown. If you accidentally remove the back
cover while the phone is switched on, the phone
will automatically switch off.
Attach the back cover release key to your
keyring for convenience.
2
VERTU PHONE KEYPAD
> Insert the battery (07) top end first. Ensure that the
contacts on the top end of the battery align with
the contact points (08) inside the battery
compartment.
> Ensure that the battery and SIM card are seated
correctly before replacing the back cover.
> Pivot and slide the back cover into position until it
clicks into place. The cover should close tightly
using only light pressure do not force it closed! If For example, press the S E L E C T I O N key below
the cover does not close easily, remove it and Me nu to access the menu or press the S E L E C T I O N
check the battery and SIM are correctly inserted, key below G o t o to access the shortcuts menu.
and the retainer (09) is correctly positioned and
locked. When pressing keys, press them briefly and firmly,
without holding them down unless otherwise
instructed.
3
If your battery requires charging, a B a t t e r y l o w If your Vertu phone was purchased at a Vertu store,
message is displayed when you first switch on your the time and date should already be set for you.
Vertu phone. Refer to Charging your battery on
We recommend setting the time and date
page 57 for more information.
immediately to ensure that features which
> Your Vertu phone has use the time and date (for example, the
an internal antenna Organiser) operate correctly.
located inside the top-
rear panel (02). Do not To set the time when you switch on your Vertu
touch the antenna phone for the first time:
02 unnecessarily when > Use the N U M B E R
phone is switched on. keys to key in the
correct time.
> Use the S C R O L L keys
to toggle between
hours and minutes.
Contact with the antenna affects call quality and
may cause the phone to operate at a higher power You can enter the time in either 12-hour (am/pm)
level than otherwise needed. Avoiding contact with format or 24-hour format.
the antenna area when operating the phone
optimises the antenna performance and battery For example, to set the time to 08:30:
life. > Key in 8.
ENTERING YOUR PIN CODE > Scroll to minutes. The leading zero is added to the
hour figure.
Depending on your SIM card settings, you may be
prompted to enter a PIN (Personal Identification > Key in 30.
Number) code when you switch on your Vertu
> Press O K .
phone. This code is used to protect access to your
SIM card and is independent of your Vertu phone. Or, to set the time to 12:30:
If you used your SIM card in another phone
previously, the code will be the same. > Key in 12. The cursor automatically jumps to the
minutes.
> Use the N U M B E R keys
to key in your PIN code. > Key in 30.
> Press O K . > Press O K .
If the hour you entered was not in 24-hour format,
you are prompted to confirm if the time entered is
am or pm:
> Scroll to am or p m .
> Press S ele c t . The
time zone screen is
displayed.
It is recommended that you activate both the
PIN code and security code to help prevent
unauthorised use of your SIM card and your
Vertu phone. Refer to the "Chapter Security" To select your local time zone:
chapter for more information.
> Scroll to the
SETTING THE TIME AND DATE appropriate time
zone.
If the time and date are not set, you will be > Press S ele c t . The
prompted to enter your time settings when you first date screen is
switch on your Vertu phone. displayed.
4
To set the date: Profi le s Allows you to manage the
> Use the N U M B E R settings for audible and
keys to key in vibration alerts. Six different
the date. profiles are available on your
Vertu phone.
> Use the S C R O L L keys
to move between the Se ttin g s Allows you to set up your
figures. Vertu phone to your
preference. In addition to
> Press O K . A
basic phone settings, you can
confirmation
change the display, time,
message is
shortcuts, connectivity
displayed.
(Bluetooth and GPRS), calls,
and security settings.
If the battery is removed from your Vertu
phone for longer than two hours, you may C o n t a c t s Allows you to manage your
need to set the time and date again. personal phone book
including options such as
You can enable your Vertu phone to automatically assigning speed dials and
adjust your date and time settings. voice tags to your entries.
MENU NAVIGATION A d d i t io n s Enables you to access your
multimedia files, use the media
Your Vertu phone offers an extensive range of player, voice recorder, custom
functions that are accesed through a series of applications and WAP
menus. The most commonly used features are browser.
assinged to the shortcuts menu to enable rapid
access to the function. O rg a n i s e r Allows you to view your
calendar, set reminders for
USING THE MENUS forthcoming events or dates,
add notes, review your to-do
> From the stand-by list and set the alarm clock.
display, press M enu
to navigate to a S I M May offer additional features
function using the s e r v ic e s or facilities such as online
menus. banking or sports information.
The name displayed may differ
> Use the S C R O L L keys and the feature's availability is
to scroll to the at the discretion of your
desired menu. service provider. Many
> Press Se lect to providers disable this feature.
enter the menu and
view the submenus. When navigating through the menus and submenus,
press Back or E x i t to return to the previous menu or
The menus are grouped into categories relating to
submenu without saving changes. At any time, press
a set of functions:
the E N D key to return to the stand-by display without
M e s s ag e s Allows you to write, send, saving changes.
receive and read messages.
Your Vertu phone supports USING THE SHORTCUTS
multiple message formats
such as text, multimedia, voice > From the stand-by
and e-mail. display, press G o t o
to access a function
C a l l Allows you to view information from the shortcut list.
reg i st e r about voice and data calls that
you have missed, received and > Use the S C R O L L keys
made. to scroll to the
desired function.
> Press S ele c t to
enter the function
directly.
5
The shortcut list can be customised to suit your Call status indicators
particular requirements.
While you are in a call some of the following icons
DISPLAY ICONS AND INDICATORS may appear beside the caller name or number on
the display.
The display shows the current status of your Vertu
phone. The call is active.
The battery charge and
signal strength The call is on hold.
indicators appear at
the top of the display.
The caller has disconnected the call.
6
Active function icons Connectivity icons
Active function icons appear on the top of the Connectivity icons appear on the top-left of the
display and indicate the functions that are display and indicate the functions that are currently
currently enabled. enabled.
You have diverted all voice calls on both lines G e n e r a l - The default number type.
1 and 2.* When using the SIM memory, this is the only
icon shown beside directory entries.
M o b i le
Home
7
When keying in international numbers, press
O f f ic e the key twice instead of keying in the
international access code. A plus (+) sign
Fa x appears on the display to represent the
international access code.
Where more than one type is associated with a > Press the S E N D key to
contact, the default number is highlighted in the begin your call. It may
list. take several seconds to
establish your call.
Additional detail icons are used for the other
information attached to a contact.
> Hold your Vertu phone
E - ma i l a d d re s s in the normal speaking
position during your
Web a d d re ss conversation. Avoid
unnecessary contact
with the antenna as this
Po s t a l a d d re s s may degrade call
quality.
Note
PROGRESS INDICATOR
The following progress indicator may appear when ANSWERING C ALLS
your Vertu phone is processing information or
When you receive an incoming call, by default, a
waiting for a response from the network, for
ringing tune is played and a call message is
example when sending a text message.
displayed. If enabled, your Vertu phone
The progress indicator animates to show also vibrates.
that your Vertu phone is communicating > Press the S E N D key to
with the network. You should wait before answer an incoming
pressing any of the phones keys. call.
MAKING CALLS
8
LAST NUMBER REDIAL C o n f e re n c e Join several calls together
into one conversation.
> From the stand-by
P ri v a t e c a ll Have a private conversation
display, press the S E N D
with one participant in a
key to access a list of
conference call.
the most recently
dialled numbers. E n d c a ll Disconnect the active call
and make any held
> Use the S C R O L L keys to call active.
scroll to the desired E n d a l l c al ls Disconnect all calls and
number. return to stand-by.
Lo u d s p e a k e r Use the phone in
speakerphone mode. Do not
> Press the S E N D key to hold the phone to your ear
call the selected when the loudspeaker is
number. active.
SPEAKER PHONE
The speaker phone uses the internal speaker in
IN C ALL FUNCTIONS your Vertu phone to allow you to have a hands-free
phone call or allow people around you to
While you are in a call, several functions are participate in conversation.
available from the O p t i o n s submenu:
To use the speaker phone while in a call:
Hol d or U n h o ld Put a call on hold or unholds > Press Lo u d sp . to
9
To set up a conference call: To use the V O I C E M A I L key to listen to your voice
> Call the first participant. messages, the voice mailbox number must be
stored in your Vertu phone.
> Press O p t i o n s .
> Press and hold the 1
> Scroll to Ne w c a ll and key. This is the
press S el ec t . V O I C E M A I L key.
> Call the next participant. > If you are prompted, key
> Press O p t i o n s . in the voice mailbox
number and press O K .
> Scroll to C o n f e re n c e
and press S e l e c t . A
confirmation message
appears and the For more information on voicemail contact your
conference call is service provider.
activated.
> Repeat the the process to EMERGENCY CALLS
add another new
participant to the IMPORTANT! Your Vertu phone, like any wireless
conference call. phone, operates using radio signals, wireless and
landline networks as well as user-programmed
functions. Because of this, connections in all
To have a private conversation with one of the
conditions cannot be guaranteed. Therefore, you
participants:
should never rely solely upon any wireless phone
> Press O p t i o n s . for essential communications, for example medical
> Scroll to Pr i v at e c al l emergencies.
and press S e l e c t . Emergency calls may not be possible on all
> Scroll to the desired wireless phone networks or when certain network
participant and press O K . services and/or phone features are in use. Check
A confirmation message with local service providers.
is displayed. The other
participants cannot hear MAKING AN EMERGENCY CALL
your conversation with > If the phone is not on, switch it on. Some networks
the selected person. may require that a valid SIM card is properly
To end the private inserted in the phone.
conversation and return to
> Press the E N D key as many times as needed to
the conference call:
return to the stand-by display.
> Press O p t i o n s .
10
KEYPAD LOCK UNLOCKING THE KEYPAD
You can lock the keypad on your Vertu phone to > Press U nlo ck followed
prevent the keys being operated accidentally, for by the key within two
example when it is in your pocket or bag. seconds. A confirmation
message is displayed.
LOCKING THE KEYPAD
VERTU CONCIERGE
11
TEXT ENTRY BASIC TEXT INPUT
To key in a character, press a N U M B E R key once or
In addition to standard numeric entry, your Vertu
several times, depending on which character you
phone supports two methods for entring text and
require. The table below lists the characters
numbers.
available on each N U M B E R key and the order they
> Basic Text Input (Dictionary off) This appear when you press the N U M B E R key multiple
method is used to enter text based on multipl times.
key presses to generating a corresponding
letter. For some features, such as entering a 1 .,'?!"1-()@/:_
contact name, this may be the only way to
enter text. 2 a b c2
12
Basic Text Input Example To use predictive text input:
To write the word Vertu using basic text input in a > Press the key until the icon is displayed
text message: with the appropriate text input mode for case.
> Press the key until the > For each letter of the word that you want to spell,
icon is displayed. press the corresponding N U M B E R key on your
> Press the 8 three times keypad only once, even if the letter you want is not
for V. the first letter on the key. The phone guesses the
word you are trying to spell.
> Press the 3 key twice
for e. > If the displayed word is not correct, press the
key to see other letter combinations/matches. To
> Press the 7 key three
move forward through the list of matches, press
times for r.
the key repeatedly. To return to the previous
> Press the 8 once for t. word in the list, press P re v. .
> Wait for the cursor to > Press the 1 key to insert a period or other
reappear then press the punctuation into your text. The punctuation forms
8 key twice u. part of the word.
Use the S C R O L L keys to
> Press the 0 key to accept the word, enter a
move the cursor through
space, and begin writing the next word.
the text message.
Press C le ar at any time to > If question mark appears after a word and you can
enter no more letters, press S p e ll to add the
erase the character before
word to the dictionary. Refer to Adding a Word to
the cursor.
the Dictionary on page 13.
> To insert a number in your text, press and hold the
PREDICTIVE TEXT INPUT corresponding N U M B E R key.
Predictive text reduces the number of key presses > Press and hold the key to access special
required to key in a word. As you key in characters, characters such as dollar sign, euro symbol or
predictive text attempts to match the characters to pound sign. Refer to Special Character Input
a word in the built-in dictionary. on page 14.
Before you can use predictive text input, you must
select the language for predictive text. Adding a Word to the Dictionary
> From the text input If a word is not recognised, a question mark
display, press O p t i o n s . appears at the end of the text you have just keyed
in. An audible alert also sounds if your Vertu phone
> Scroll to D ic t i o n a ry and
is set up for audible alerts.
press S el ec t .
> Scroll to the desired To add the word to the dictionary:
language or select > Press S p el l .
Di cti o nar y o f f to
disable predictive text > Key in the desired word. The basic text input
input then press S e l e c t . input method is automatically used when adding
A confirmation message a new word to the dictionary.
is displayed. > Press S ave . The new word appears in your text.
The next time you use predictive text input, the new
Predictive text is only available for languages word will be recognised.
listed.
New words are automatically added to the
The selection of a writing language does not dictionary if you delete the space between two
affect the language used in the phone menus known words.
and displays.
Depending on the language and the length of the
Once enabled, simply press the key to switch
words, you may be able to add hundreds of words
between predictive text input (shown by the
to the dictionary. When the dictionary is full, the
icon) and basic text input (shown by the icon) at
most recent addition replaces the first.
any time when keying in your text.
13
Predictive Text Input Example become ghosted on the display when they are
supposed to be inactive or appear duller when they
The example below describes how to key in are active.
Vertu.
The screen saver is automatically activated after a
When keying in a word, the characters on the delay since the last key was pressed. You can set
display may not be part of the desired word. this delay to suit your preferences. This delay can
As you continue keying in characters, the
be set from 25 seconds to 1 hour. To exit the
word displayed becomes more accurate.
screen saver, press either of the S E L E C T I O N keys.
> Press the key until the predictive text
You cannot disable the screen saver function
input icon is displayed. of your Vertu phone.
> Press the 8 key for V.
When the screen saver is activated, the current
display contents are hidden and the screen saver
> Press the 3 key for e. display is shown. If a key is pressed while the
screen saver is active, the display contents are
automatically restored and no information is lost.
> Press the 7 key for r. The vertical position of the screen saver in the
display is shifted every minute to ensure that the
> Press the 8 key for t. screen saver itself does not remain static.
In addition to a key press, some events may trigger
> Press the 8 key for u. the suspension of the screen saver. For example, if
you connect the charger, the screen saver is
Press C l e a r at any time to erase the suspended to display the charging confirmation
character before the cursor. message. After the event, the screen saver waits
for the delay time and becomes active again.
SPECIAL CHARACTER INPUT To change the screen saver delay:
Though most common special characters such as
> From the stand-by display, press M enu .
punctuation sysmbols can be inserted by pressing
the 1 key, other special characters can be inserted > Scroll to S e t t i n g s and press S el ec t .
in your text at any time using the special characters
> Scroll to Display se ttings and press S e l e c t .
input.
> Scroll to S c re e n s a v e r and press S e l e c t .
To use special character input:
> Scroll to one of the time-out options, or highlight
> Press the the key (or press and hold the key
O t h e r to enter your own time-out value, then
if using predictive text) to access the special
press S el ec t .
characters list.
> Enter the delay time in minutes and seconds. Use
> Use the central N U M B E R keys to highlight the
the scroll keys to toggle between minutes and
charater you want.
seconds. The minimum delay is 25 seconds and
Press the 2 key to move the cursor up.
the maximum is 60 minutes.
Press the 8 key to move the cursor down.
Press the 4 key to move the cursor left. > Press O K . A confirmation message is displayed.
Press the 6 key to move the cursor right.
> Press the the key to swap between the pages
of symbols.
> Press U se or the 5 key to insert the symbol into
your text.
SCREEN SAVER
14
THE SCREEN SAVER DISPLAY
01 02
03
05 04
15
02 SECURITY PIN CODE REQUEST
16
CALL BARRING FIXED DIALLING
Call barring is a network service that allows you to Fixed dialling is a network service that allows you to
restrict the incoming and outgoing calls that you restrict outgoing calls to only the numbers you
make and receive. Contact your service provider specify in a fixed dialing list. Contact your service
for more information about using this function. provider for more information about using this
function.
When outgoing calls are barred, calls may be
possible to the emergency number programmed When fixed dialing is enabled, calls may be
into your Vertu phone, for example 112, 911 or possible to the emergency number programmed
other official emergency number. into your Vertu phone, for example 112, 911 or
other official emergency number.
You need to key in the barring password to set
up the call barring service. To obtain the barring You will need to key in the PIN2 code to save
password, contact your service provider. and edit numbers in the fixed dialling list or to
call numbers not in the list. The PIN2 code is
To enable or disable call barring: supplied with some SIM cards. For more
information contact your service provider.
> From the stand-by display, press M enu .
> Scroll to S e c u r i t y s e t t i n g s and press S ele c t . > From the stand-by display, press M enu .
I nt . c a ll s e xc e p t t o h o m e c o u n t r y to bar If you are using fixed dialing for the first time, it
all international calls with the exception of calls is recommended that your select N u m b e r l is t
made to your home country (defined by your to add numbers to your list before enabling fixed
service provider) when abroad. dialing. You will receive two warning messages.
I nc o m in g c a ll s to bar all incoming calls. > When prompted, enter your PIN2 code and press
OK.
I nc o m in g c a ll s wh e n a b ro ad to bar all
incoming calls when you are abroad. > Either enter your number manually then press O K ,
or press S ea rch to select a name from your
C a n c e l a l l b a r r i n g s to cancel all call bars.
contacts list and then press S e l e c t .
Simply enter your barring password when
prompted and press O K . If you entered a number manually, enter a name
> Scroll to A c tiv ate to enable the bar, C a n c e l to for the number and press O K .
disable it, or C h e ck s t a t u s to view the status of > A confirmation message is displayed and you are
the current bar, then press S e l e c t . returned to the fixed dialling list. Add addtional
numbers to your list in the same way. Press B a ck
> If you are enabling or disabling a bar, you must
when you have completed your list.
enter your barring password when prompted then
press O K . A confirmation message is displayed. > Scroll to O n to enable fixed dialing.
Refer to Access Codes on page 18 for more When fixed dialing is on, GPRS connections
information about changing your barring password. are not possible except while sending text
messages over a GPRS connection. In this
case, the recipients phone number and the
message center number must be included in
the fixed dialing list.
You cannot access SIM memory manually
(view or copy numbers on the SIM card) while
fixed dialing is active.
17
To modify your fixed dialling list: SECURITY LEVEL
> From the stand-by display, press M enu .
The security code is a user code that helps protect
> Scroll to S et t i n g s and press S ele c t . your phone against unauthorised use. The security
level function allows you to specify when you are
> Scroll to S e c u r i t y s e t t i n g s and press S ele c t . required to key in the security code.
> Scroll to F ix e d d i a l li n g and press Se lect . To change the security level:
> Scroll to N u m b e r l i st and press Se lect . > From the stand-by display, press M enu .
> When prompted, enter your PIN2 code and press > Scroll to S e t t i n g s and press S el ec t .
OK.
> Scroll to S e c u r i t y s e t t i n g s and press S e l e c t .
> Highlight an entry then press O p t io n s to select
one of the following options: > Scroll to S e c u r i t y l e v e l and press S el ec t .
Vie w n u m b e r to view the number for an entry. > When prompted, enter your security code and
press O K .
A d d to add a number to your fixed dialing list.
> Scroll to one of the following three options then
E d i t to edit the selected entry.
press S el ec t :
D e l e t e to delete the selected entry.
Non e to disable the security code and any SIM
D e l e t e al l to delete entries in the list. may be used in the phone.
Refer to Access Codes on page 18 for more M e m o r y to allow any SIM to be used in the
information about changing your PIN2 code. phone but you need to enter the security code
when you try to access your phones directory
CLOSED USER GROUP
after a different SIM card has been inserted.
The closed user group is a network service that P h o n e to reequire that the security code is
allows you to specify a group of people you can entered when you switch on the phone after
call and who can call you. Contact your service another SIM card has been inserted.
provider for more information about using this
If you change the security level, the numbers
function. in your recent calls list are erased.
When outgoing calls are limited to closed user
groups, calls may be possible to the emergency Refer to Access Codes on page 18 for more
number programmed into your Vertu phone, for information about changing your security code.
example 112, 911 or other official emergency ACCESS CODES
number.
To enable or disable a closed user group: The following access codes are used provide
> From the stand-by display, press M enu .
increased protection for your Vertu phone and your
information:
> Scroll to S et t i n g s and press S ele c t .
> Security code (510 digits) This code is
> Scroll to S e c u r i t y s e t t i n g s and press S ele c t . stored in your Vertu phone. It can be
changed by the user. The defult security
> Scroll to C l o s e d u se r g ro u p and press code is 12345.
S el ec t .
> Scroll to O n to enable the closed user group, O f f > PIN code and PIN2 code (48 digits)
to disable it, or D e f a u l t to specify that the people These codes are stored in your SIM card.
included in the group, which you have agreed with They can be changed by the user. The defult
the service provider, can call you and you can call codes are supplied by your service provider.
them, then press S e l e c t .
> PUK code and PUK2 code (8 digits)
> If you are enabling a closed user group, enter the These codes are stored in your SIM card.
group number when prompted then press O K . A They cannot be changed by the user. In the
confirmation message is displayed. event that your PIN or PIN2 code become
blocked, you will need to contact your
service provider to obtain the corresponding
PUK code.
18
> Call barring password (4 digits) This code CHANGING THE PIN CODE
is stored in your SIM card but can be
Your PIN code is used to protect the basic user
changed by the user. The defult code is
functions of your SIM card. If you enable PIN code
supplied by your service provider.
request (refer to PIN Code Request on page 16),
you will need to enter your PIN code each time you
Avoid using codes similar to emergency numbers
switch on your Vertu phone.
such as 112 or 911 to prevent accidental dialing of
the emergency number when entering your code. Your PIN code must be activated before you
can change it.
CHANGING THE SECURITY CODE
To change your PIN code:
The security code helps protect your Vertu phone
from unauthorised use. You need to key in the > From the stand-by display, press M enu .
security code before you can do the following:
> Scroll to S e t t i n g s and press S el ec t .
> Switch on the phone when a new SIM card
> Scroll to S e c u r i t y s e t t i n g s and press S e l e c t .
is inserted (depends on security level
setting). > Scroll to A c c e s s c o d e s and press S e l e c t .
> Erase all entries in your contacts directory. > Scroll to C h a n g e P I N c o d e and press
Select.
> Restore the default settings.
> When prompted, enter your current PIN code and
press O K .
> Change the security level.
> When prompted, enter your new PIN code and
If you key in an incorrect security code five press O K .
times in succession, your Vertu phone will not
accept the correct security code for the next > Enter your new PIN code again to verify and press
five minutes. Within that five minutes, your O K . A confirmation message is displayed.
Vertu phone will show an error when you
attempt to key in the security code, even if it is
Your SIM card will beome blocked if you
correct. incorrectly enter your PIN a number of times,
normally after three consecutive attempts. You will
To change the security code: need to contact your service provider to obtain a
PIN UnblocK (PUK) code to unblock your PIN and
> From the stand-by display, press M enu . restore your SIM cards functionality.
> Scroll to S et t i n g s and press S ele c t . Contact your service provider for assistance if you
forget your PIN code.
> Scroll to S e c u r i t y s e t t i n g s and press S ele c t .
> Scroll to A c c e s s c o d e s and press S e l e c t .
> C h a n g e s e c u r i t y c o d e is shown, press
S el ec t to change the setting.
19
CHANGING THE PIN2 CODE To change your barring password:
Your PIN code is used to protect the advanced > From the stand-by display, press M enu .
user functions of your SIM card such as fixed
dialling lists. > Scroll to S e t t i n g s and press S el ec t .
> From the stand-by display, press M enu . > Scroll to A c c e s s c o d e s and press S e l e c t .
20
03 MESSAGES TEXT MESSAGES
LINKED MESSAGES
To send and receive messages you will need to be
subscribed to a message network service. You can Your phone can send and receive long text
then send and receive messages to compatible messages (up to 900 basic characters). Text
phones that are also subscribed to a message messages that exceed 160 basic characters are
service. You can also send and receive picture automatically split into multiple messages and sent
messages, multimedia messages, and e-mail if as a series. The series of messages is linked by the
supported by your service provider. compatible phone when received and displayed as
a single SMS message. For this feature to work
If your phone memory is full, you may have to delete
properly, the receiving phone must also support
messages from your inbox or outbox before you
linked messages.
can send or receive further messages.
While you write a message, the number of available
FONT SIZE characters and the current part number of linked
Your Vertu phone supports different font sizes for message (for example, 120/2) are shown in the top
viewing your messages. Your font size setting right corner of the display.
affects how both messages being composed and While receiving linked messages, you can start
messages received. reading the first part before the phone has received
To change the font size for your messages: the entire message. While viewing the message,
you may see * s o m e t e x t m is s in g * on the
> From the stand-by display, press M enu . display. This is normal, and the message content
will be updated as soon as the missing sequence
> Scroll to M e s s ag e s and press S e l e c t .
arrives.
> Scroll to M e s s ag e s e t t i n g s and press If the memory is full, you may have to delete a
S el ec t . message from your inbox or outbox before your
> Scroll to Oth er se ttin g s and press Se lect . phone can update the missing text.
21
WRITING AND SENDING TEXT MESSAGES S e n d i n g o p t io n s then S e n d t o m a n y to
send the message to multiple recipients in your
The C re a t e m e s sa g e option allows you to write
directory, S e n d t o l i s t to send the message to
and send text messages. Refer to Text Entry on
one of your distribution lists, or Sen d ing
page 12 more information about entering text
p ro f il e to send the message to one of your
using your phone keypad.
predefined profiles, then press O K .
To write a new message: When sending text messages, your Vertu
> From the stand-by display, press M enu . phone displays a confirmation message. This
is an indication that the text message has
> The M es sa g es menu is shown, press S e l e c t . been sent by your Vertu phone to the
message centre.
> Tex t m es sa g es is highlighted, press S ele c t .
This is not an indication that the text
> C re at e m e s sa g e is highlighted, press S e l e c t . message has been received at the intended
destination.
> Compose your message using the keypad.
> While composing your message, press O p t io n s READING MESSAGES
at any time to access the message options: When you receive a message, an information note
and an envelope icon appear on the display below
S end and S e n d i n g o p t i o n s see below.
the signal strength and battery indicators. By
C l e a r t e x t to erase all text in the current default a received text message is accompanied by
message. an audible alert.
S av e m e s s ag e to store your current A flashing envelope icon on the stand-by
message. Scroll to S av e d t e x t m s g s . to save display indicates that the message memory is
the message in the S a v e d t e x t m s g s . folder, full. Before you can receive or send any more
Tem p l at e s to save the message as a text messages you must erase some of your
predefined template, or select one of your own existing text messages or move them to a
custom folders, and press Se le ct . personal folder.
S end to send to a single recipient. Enter the > Either press O p t io n s to access the message
recipients phone number or press Se arch to options or E x it to store the message in your
retrieve a number from your directory, then Inb ox folder and return to the stand-by display.
press O K . To use the message viewing options:
> When reading a message, press O p t i o n s to
access the following message options:
22
D e l e t e to delete the message you are viewing. > Scroll to Move and press Se le ct .
R ep l y to reply to the sender of the message. > Highlight the new folder for your message in the
You can choose to start your reply with E m p t y list and press Se lect . If you move a message to
s c re e n for a blank message, O r ig i n a l t e x t to the Tem p l a t es folder, the message will be
repeat the original message, or one of the many available as a template when writing messages.
other reply response templates.
To create a new personal folder:
U s e d e t a i l to use any numbers, e-mail
addresses or Web addresses from the current > From the stand-by display, press M enu .
message. > The M e s s ag e s menu is shown, press Se lect .
Fo r ward to forward the message to another
> Tex t m e s s ag e s is highlighted, press S e l e c t .
recipient.
E d i t to edit the message.
> Scroll to My folde rs and press S e l e c t .
M o ve to move the message to another folder. > If there are no folders in the list, press A d d , or if
there are folders in the list, press O p t i o n s then
R e n a m e to rename the message title. scroll to A d d f o l d e r then press S e l e c t .
C o p y t o c a l e n d a r to copy text from the > Use the keypad to enter a name for your new
beginning of the message to the phone folder, and press O K . Your new folder is added.
calendar as a reminder note for the current day.
To browse your personal message folders:
M e s s a g e d e t a il s to view the senders name
and phone number, the message centre used, > From the stand-by display, press M enu .
and the date and time sent.
> The M e s s ag e s menu is shown, press Se lect .
TEXT MESSAGE FOLDERS > Tex t m e s s ag e s is highlighted, press S e l e c t .
All text messages stored in your Vertu phone are
> Scroll to My folde rs and press S e l e c t .
organised in folders. In addition to the default
folders, you can create new folders to organise > Scroll to one of your personal folders, press
your messages. O p t io n s then highlight one of the following
options and press Se le ct :
To browse your text message folders:
O p e n f o ld e r to open the folder and view the
> From the stand-by display, press M enu .
messages it contains.
> The M es sa g es menu is shown, press S e l e c t . A d d f o ld e r to add a new personal folder.
> Tex t m es sa g es is highlighted, press S ele c t . R e n a m e f o l d e r to rename the folder.
> Scroll to one of the following folders and press De lete folder to delete the folder and any
S el ec t : messages it contains.
I nb ox Messages are automatically stored in DISTRIBUTION LISTS
this folder when they arrive and, by default, after
they have been read. If you frequently send messages to a fixed group of
recipients, you can define a distribution list to
S ent ite ms Messages that you have sent
simplify the process.
are automatically stored in this folder.
S av e d t e x t m s g s. The default store for When you send a message to a distribution list the
messages that have been read and saved or phone automatically sends the message separately
partially composed and saved. to each recipient in the list. Sending a message
using a distribution list will incur charges for each
Tem p l at e s Prewritten message templates recipient in the list.
are stored in this folder. The default templates
can be edited and new templates created. To create a distribution list:
M y f o ld e rs Your personal message folders > From the stand-by display, press M enu .
are stored in this folder.
> The M e s s ag e s menu is shown, press Se lect .
To save a message to a different folder:
> Tex t m e s s ag e s is highlighted, press S e l e c t .
> When reading the message, press O p t i o n s to
access the message options. > Scroll to Di s t ri b u t i o n l i st s and press S e l e c t .
23
> If there are no distribution lists defined, press > Scroll to Di s t ri b u t i o n l i st s and press S e l e c t .
A d d , or if there are existing distribution lists, press
> Scroll to Unde li vered , press O p t i o n s then
O p t io ns then scroll to A d d l is t then press
highlight one of the following options and press
S el ec t .
Select:
> Use the keypad to enter a name for your new
R e s e n d t o l i s t to resend the message to the
distribution list, and press O K . Your new
recipients on the undelivered list.
distribution list is created.
Vie w l is t to view the list of recipients to whom
To manage your distribution lists:
the message sending failed.
> From the stand-by display, press M enu . De lete l is t to delete the undelivered list.
> The M es sa g es menu is shown, press S e l e c t . Vie w m e ss a g e to view the failed message.
> Tex t m es sa g es is highlighted, press S ele c t .
ERASING MULTIPLE TEXT MESSAGES
> Scroll to D i st r i b u t io n l is t s and press S e l e c t .
You can erase all text messages from any of the
> Scroll to one of your distribution lists, press standard or personal folders, or from all the folders
O p t io ns then highlight one of the following at once.
options and press S e l e c t :
To delete multiple messages at once:
View l is t to view the contacts in the
> From the stand-by display, press M enu .
distribution list.
> The M e s s ag e s menu is shown, press Se lect .
A d d l i st to create a new distribution list.
R e n a m e l i s t to rename the distribution list. > Tex t m e s s ag e s is highlighted, press S e l e c t .
If a message cannot be sent to one or more > From the stand-by display, press M enu .
recipients in a distribution list, Un del ive re d > The M e s s ag e s menu is shown, press Se lect .
appears as one of the distribution lists.
> Scroll to Mes s ag e s e t t i n g s and press
To view the undelivered message(s) options: Select.
> From the stand-by display, press M enu . > Tex t m e s s ag e s is highlighted, press S e l e c t .
> The M es sa g es menu is shown, press S e l e c t . > S e n d i n g p ro f il e is highlighted, press S e l e c t .
> Tex t m es sa g es is highlighted, press S ele c t .
24
> If more than one message profile set is supported > Scroll to O v e r w ri t i n g i n I n b ox and press
by your SIM card, select the set you want to Select.
change and press S e l e c t . You can modify the > Scroll to Allow ed and press S e l e c t .
following messaging options:
M es s a g e c e n t re n u m b e r to store the phone SMS E-MAIL
number of the message centre, used for You can use the text messaging function of your
sending text messages. You should obtain this phone to send and receive SMS e-mail messages.
number from your service provider. Contact your service provider for more information
M e s s ag e s s e n t v ia to select the message about subscribing to the service. The maximum
type as Tex t , E -m a il , P ag i n g or Fa x . Your length of an SMS e-mail is 160 basic characters.
service provider may have limited support for Incoming SMS e-mail messages are received and
different message types. displayed in the same way as standard text messages.
M e s s a g e v a li d i t y to define how long the To send an SMS e-mail message:
network attempts to send your messages before
it gives up. > The M e s s ag e s menu is shown, press Se lect .
> Tex t m e s s ag e s is highlighted, press S e l e c t .
D e f a u l t rec i p i e nt n u m b e r to define the
default number used to send messages. > Scroll to New S M S e- m ai l and press Se lect .
D e l i v e r y rep o r t s to request that the network > Enter the recipients e-mail address, or press
sends you delivery reports for your messages. S e a rch to use your directory, then press O K .
> Enter the e-mail subject, then press O K .
U s e G P R S to set GPRS as the preferred
method of sending text messages. > Type your e-mail message, then press O p t i o n s .
R ep l y v i a s a m e c e n t re to allow the recipient > Send S M S e -mail is highlighted, press
of your message to send you a reply message Select.
using your message centre (network service). > If you have not stored the settings for your SMS e-
R e n a m e s e n d in g p ro f i le to change the
mail service, enter the number of the e-mail server,
name of the selected profile. You cannot rename then press O K .
the default profile. MULTIMEDIA MESSAGES (MMS)
25
Multimedia messaging supports a wide range of you cannot edit the current set of settings, select a
standards for each of the following formats: different set and try again.
> Picture: JPEG, GIF, animated GIF, WBMP, > Modify each of the following parameters with the
BMP, and PNG information supplied by your service provider:
S e t t i n g s ' n am e to name your set of settings.
> Sound: SP-MIDI and AMR audio
H o m e p a g e to set the homepage where your
> Video: clips in H.263 format with SubQCIF browser retrieves multimedia messages.
image size and AMR audio
Prox i es to enable or disable proxy handling of
your multimedia messages.
If a received message contains unsupported
attachments, these may be replaced with an Pr im a ry prox y and S ec o nd a ry p rox y to
O b je c t f o r m a t n o t s u p p o r t e d message. specify the IP address and port of the proxy
servers.
You cannot receive multimedia messages if you
have a call in progress, a Java application running, Da t a bea re r to specify the data transport
or an active browsing session. Because delivery of mechanism (always G P R S ).
multimedia messages can fail easily, you should B e a re r s e t t i n g s to specify the following data
not rely upon them for essential communications. transport settings:
MMS SETTINGS G P R S a c c e ss p o in t to specify the access
point that will process your login/connection.
Before you can use the multimedia message
feature, you must obtain the appropriate settings A u t h e n t i c a t i o n t y p e to select either
for use with your service provider. These can be N o r m al or S e c u re authentication.
entered manually or more commonly, sent to you U s e r n a m e to specify the login user name.
through an automated connection settings
message. Contact your service provider for more P a ss w o rd to specify the login password.
information about obtaining these settings or use Due to the complexity of entering all of the
the Order Settings link from your CD-ROM to take above settings manually, it is strongly
you directly to the appropriate page on the Vertu recommended that you use the automatic
web site to obtain the settings for your phone. settings message to obtain your settings.
26
D e f a u l t s l i d e t i m i n g to set the default time To insert an additional slide, highlight S li d e
in mm:ss format for each slide (equivalent of a then press S e l e c t . When your multimedia
page) in an MMS to displayed on the screen. message contains several slides, you can open
the desired slide by selecting P re v io u s s li d e ,
A ll o w m u l t im e d i a rec e p t i o n to control
Ne xt s li d e or S l i d e l i st from the message
when multimedia messages can be received.
options.
Select Ye s to enable reception, No to disable
reception, or In ho me ne twork to receive For items from your contacts list or calendar,
multimedia messages only when using your highlight B u s i n e s s c a rd or C a l e n d a r n o t e
home network, not when roaming. then press S e l e c t . Browse to locate the item
you want and press O K .
I n c o m in g m u l t i- m e d i a m e s s ag e s to
control how multimedia messages are retrieved. > To set the time interval between the slides, press
Select Retr ie ve to retrieve incoming O p t io n s , highlight S l i d e t i m i n g and press
messages automatically, R e t r. m an u al l y to S e l e c t . Enter the time interval and press O K .
manually retrieve, or R ej ec t to disable retrieval.
> To change where the text is displayed relative to
C o n n e c t i o n s e t t i n g s to define the MMS your multimedia attachments, press O p t i o n s ,
connection parameters. Refer to MMS highlight P la c e t e x t l a st or P l a c e t e x t f i r s t
Connection Settings on page 26. and press S e l e c t .
A ll o w adv erts to enable/disable the > To clear all text in the current slide or use one of
automatic reception of multimedia the standard text message editing options, press
advertisements. O p t io n s , highlight C l e a r t ex t , Inser t w o rd ,
I n s e r t s y m b o l or D ic t i o n a ry and press
WRITING AND SENDING MULTIMEDIA S e l e c t ; or highlight M o re o p t io n s then
MESSAGES Ins e r t c o n t a c t or I ns e r t n u m b e r .
You can create multimedia messages with one or > To delete an image, slide, video clip, or sound clip
more attachments up to the maximum 100k from the message, press O p t i o n s , highlight
message size. When creating your multimedia De lete and press S el ec t . Highlight I m a g e ,
message, the current remaining space is shown on S o u n d c li p , Vi d e o c li p or S li d e as
the top line just under the signal and battery appropriate then press S el ec t .
strength indicators.
> To add a subject to the message, press O p t i o n s ,
Unlike text messages, multimedia messages can highlight M o re o p t i o n s and press S e l e c t .
be formed of multiple pages, known as slides. You Highlight E d it su b j e c t and press Se lect . Enter
can control how long each slide is displayed. Each a subject for your message and press OK.
slide can contain up to 1000 basic text characters
(less for complex languages) one image, and one > To preview your message presentation before
sound clip. You cannot form a multimedia message sending it, press O p t io n s , highlight P re v ie w
with multiple slides and video attachments. and press S e l e c t .
To write and send a multimedia message: > To save the message press O p t io n s , highlight
S av e m e s s a g e and press S el ec t .
> From the stand-by display, press M enu .
> To send the message, press O p t i o n s , S end to
> The M es sa g es menu is shown, press S e l e c t . is highlighted, press S e l e c t . Highlight P h o n e
> Scroll to M u l t im e d i a m s g s . and press n u m b e r , E- m ai l a d d re s s or Ma ny .
S el ec t . > Enter the recipients phone number/e-mail address
> C re at e m e s sa g e is highlighted, press S e l e c t . or press S ea rch to retrieve a number from your
directory, then press O K . The message is moved
> Enter the text of your message then press to the O u t b ox folder for sending.
O p t io ns , highlight I n s e r t and press S e l e c t
then one of the following:
For multimedia files, highlight I m a g e , S o u n d
c l i p , or Vi d e o c li p then press S ele c t .
Browse through your gallery folders to locate
the file and press O p t i o n s , highlight In se rt
and press S e l e c t .
27
It takes more time to send a multimedia To use the multimedia message viewing options:
message than to send a text message. While
> When reading a multimedia message, press
the multimedia message is being sent, the
O p t io n s to access the following message
animated indicator is displayed and you can use
options:
other functions on the phone. If there is an
interruption while the message is being sent, the Play present atio n to view the multimedia
phone tries to resend it a few times. If this fails, message from the start.
the message remains in the O u t b ox folder and
you can try to resend it later. Check your C o n t i n u e p re se nt . to continue viewing the
O u t b ox folder for unsent messages. multimedia message from where you stopped.
When sending messages, your Vertu phone Vie w t e x t to view only the text included in the
displays a confirmation message. This is an message.
indication that the message has been sent by O p e n i m a g e , O p e n s o u n d c li p , O p e n c al .
your Vertu phone to the message centre. n o t e , O p e n b u s . c a rd or O p e n v id e o c l ip
This is not an indication that the message has to open the multimedia attachment in the
been received at the intended destination. current slide. From here you can view/play an
individual attachment and save it as necessary.
For more information about multimedia messaging,
contact your service provider. De let e m e s s ag e to delete the message you
are viewing.
READING MULTIMEDIA MESSAGES
R e p l y or Re ply to a l l to create a reply and
When you receive a multimedia message, an send it to the original sender and any other
information note (Mu lt i m e d i a m e s s a g e recipients of the message.
rec ei ved ) and paperclip icon appear on the
U s e d e t ai l to use any numbers, e-mail
display below the signal strength and battery addresses or Web addresses from the current
indicators. By default a received text message is message.
accompanied by an audible alert.
Fo r w a rd to forward the message to a phone
To read a new multimedia message: number, to an e-mail address, or to multiple
> Press S h o w to display the message when it is recipients.
received. Mes s ag e d e t a il s to view the senders name
> Either press O p t i o n s to access the message and phone number, the message centre used,
options or Exi t to store the message in your the reception date and time, the message size
I nb ox folder and return to the stand-by display.
and type.
> From the stand-by display, press M enu . All multimedia messages stored in your Vertu
phone are organised in folders.
> The M es sa g es menu is shown, press S e l e c t .
To browse your multimedia message folders:
> Scroll to M u l t im e d i a m s g s . and press
S el ec t . > From the stand-by display, press M enu .
> Scroll to I nb ox and press S e l e c t . > The M e s s ag e s menu is shown, press Se lect .
> Scroll to Mu l t i me d ia m s g s . and press
> The most recent multimedia message is
Select.
highlighted. Scroll through the messages to the
one you want to view then press S e l e c t to read > Scroll to one of the following folders and press
the message. Select:
> Press the lower S C R O L L key to pass through the Inb ox Multimedia messages are
message text and to advance through the slides automatically stored in this folder when they
of the whole multimedia message. arrive and, by default, after they have been read.
> Either press O p t i o n s to access the message O u t b ox Contains multimedia messages
options or Exi t to store the message in your which you have sent and are still waiting to be
I nb ox folder and return to the stand-by display. transmitted.
Sent ite m s Messages that you have sent
are stored in this folder (not enabled by default).
28
S ave d i t em s The store for multimedia E-mail Connection Settings
messages that have been read and saved or
partially composed and saved. To manually enter your connection settings or to
modify your current settings:
ERASING MULTIPLE MULTIMEDIA
> From the stand-by display, press M enu .
MESSAGES
> The M e s s ag e s menu is shown, press Se lect .
You can erase all multimedia messages from any of
the MMS folders at once. > Scroll to Mes s ag e s e t t i n g s and press
Select.
To delete multiple multimedia messages at once:
> Scroll to E -m a il m e s s ag e s and press S e l e c t .
> From the stand-by display, press M enu .
> A c t i v e e - m a i l s e t t i n g s is displayed, press
> The M es sa g es menu is shown, press S e l e c t .
Select.
> Scroll to M u l t im e d i a m s g s . and press
> Select the settings set that you want to modify
S el ec t .
from the list and press A c t i v a t e . If you want to
> Scroll to D e l e t e m e s s ag e s and press S ele c t . create a new set, select an (em p ty) entry. Your
phone can store up to 20 sets of settings.
> Scroll to the folder you want to delete all
messages from then press S e l e c t . > A c t i v e mu l t i m . s e t t i n g s is displayed again,
showing the set that you selected. Scroll to E d it
Confirm the deletion when prompted. You cannot a c t i v e e - m a i l s e t t i n g s and press Se lect .
recover deleted messages.
> Modify each of the following parameters with the
E-MAIL information supplied by your service provider and/
or e-mail provider:
You can write, send, and read e-mails with your
Vertu phone. Your phone supports POP3 and Ma il b ox name to enter the name that you
IMAP4 e-mail servers. want to use for the mailbox (also identifies your
settings set). You can use any name.
Before you can send and receive e-mail messages,
E- m ai l a d d re ss to enter your e-mail address.
you may need to do the following:
M y n a m e to enter your name that will be
> Obtain a new e-mail account or use your
displayed to e-mail recipients. Normally your
current account. For availability of an e-mail
name and e-mail address will be shown.
account contact your e-mail provider.
O u t g o in g S M T P s e r v e r to enter the server
> Contact your service provider and/or e-mail address.
provider about availability/support of this
I n c o m i n g s e r v e r t y p e to select either P O P 3
feature and to set the settings required for
or I M AP 4 depending on the type of e-mail
e-mail.
system that you are using. If your e-mail provider
supports both types, select I MA P4 . Changing
> Set the e-mail settings on your phone.
the server type also automatically changes the
incoming port number.
E-MAIL SETTINGS
I n c o m i n g P O P 3 s e r v e r or I nc o m i ng
Before you can use the e-mail message feature, I M AP 4 se rve r to enter the e-mail server
you must obtain the appropriate settings for use address for incoming e-mail.
with your service provider and/or e-mail provider.
These can be entered manually or more commonly, P O P 3 u s e r n a m e or I M A P 4 u s e r n a m e to
sent to you through an automated connection enter the user name used to access the e-mail
settings message. Contact your service provider account.
for more information about obtaining these settings P O P 3 p a s s w o rd to I M A P 4 p a s s w o rd enter
or use the Order Settings link from your CD-ROM the password used to access the e-mail
to take you directly to the appropriate page on the account.
Vertu web site to obtain the settings for your
phone. > Scroll to O t h e r s e t t i n g s and press S ele c t .
> Modify each of the following parameters with the
information supplied by your service provider and/
or e-mail provider:
29
I nc l u d e s i g n a t u re to define a signature that G P R S a c c e s s p o i n t to specify the
is automatically added to the end of each e-mail, access point that will process your login/
when you write your message. connection.
U s e S M T P a u t h o r i s a t i o n to specify if your A u t h e n t i c a t i o n t yp e to select either
e-mail service provider requires authentication N o rm a l or S ec u re authentication.
for sending e-mails. U se r nam e to specify the login user
S M T P u s e r n a m e to enter the user name name.
used for sending outgoing mails. If you do not P as s w o rd to specify the login password.
enter an user name, the POP3 or IMAP4 user
name is used instead. Due to the complexity of entering all of the
above settings manually, it is strongly
S M T P p a s s w o rd to enter the password used recommended that you use the automatic
for sending outgoing mails. If you do not enter a settings message to obtain your settings.
password, the POP3 or IMAP4passworde is
used instead. WRITING AND SENDING E-MAIL MESSAGES
O u t g o in g S MT P p o r t to enter the number of You can create e-mail messages containing up to
the e-mail server port for outgoing e-mail. The 5000 basic text characters (less for complex
most commonly used port number is 25. languages). You cannot add attachments.
I nc o m in g P O P 3 p o r t or In coming I MA P 4 To write and send an e-mail message:
p o r t to enter the port number that you have
obtained from your e-mail provider. > From the stand-by display, press M enu .
30
> Press O p t i o n s , scroll to Send to send the Fo r w a rd to forward the message to another
message immediately, S e n d l a t e r to place the recipient.
mail in your outbox for future sending or S ave
Move to move the message to another folder.
d r a f t m s g . to store the message for later, then
press S ele c t . Ma rk a s u n rea d to reset the message viewed
status indicator.
When sending messages, your device may
display Message Sent. This is an indication C h a r. e n c o d i n g to modify the text encoding
that the message has been sent by your method.
device to the message server programmed Mes s ag e d e t a il s to view the sender and
into your device. This is not an indication recipient information, the date and time sent, the
that the message has been received at the size and text encoding.
intended destination.
E-MAIL FOLDERS
DOWNLOADING AND READING E-MAIL
All e-mail messages stored in your Vertu phone are
To download your e-mail messages: organised in folders.
> From the stand-by display, press M enu . To browse your e-mail message folders:
> The M es sa g es menu is shown, press S e l e c t . > From the stand-by display, press M enu .
> Scroll to E - ma i l and press S e l e c t . The e-mail > Scroll to E- m ai l and press Se le ct . The e-mail
application is started. application is started.
> Scroll to R et r iev e and press O p t io n s . > Scroll to Inb ox to access the folder where
messages are automatically stored when they
> Highlight S ele c t to download your new e-mail
arrive and after they have been read. Press
messages or highlight Retr ie ve & sen d to
O p t io n s then highlight S el ec t and press
download your new e-mails and send the
S e l e c t to browse the folder.
messages in your outbox then press S ele c t . The
phone connects to the e-mail service and OR
downloads the messages to the inbox folder.
Scroll to O t h e r f o l d e r s , press O p t i o n s then
To read your e-mail messages: highlight Se le ct and press S e l e c t to access the
following folders:
> From the stand-by display, press M enu .
D r a f t s The store for unfinished e-mails.
> The M es sa g es menu is shown, press S e l e c t .
A rch i v e Used to organize and save e-mails.
> Scroll to E - ma i l and press S e l e c t . The e-mail
O u t b ox The store for e-mails that have not
application is started.
been sent.
> Scroll to I nb ox and press O p t i o n s .
Sent ite m s Messages that you have sent
> S el ec t is highlighted, press Se le ct . are stored in this folder.
> The most recent e-mail message is highlighted. ERASING MULTIPLE E-MAIL MESSAGES
Scroll through the messages to the one you
want to view then press O p t io n s then highlight You can erase all e-mail messages from any of the
S el ec t and press S el ec t to read the message. e-mail folders at once.
> Press the lower S C R O L L key to pass through the To delete multiple e-mail messages at once:
message text.
> From the stand-by display, press M enu .
To use the e-mail viewing options:
> The M e s s ag e s menu is shown, press Se lect .
> When reading a message, press O p t i o n s to
access the following message options: > Scroll to E- m ai l and press Se le ct . The e-mail
application is started.
R ep l y to reply to the sender of the message or
R ep l y t o al l to reply to the sender and all > Press O p t io n s then scroll to D e l e t e
recipients. You can choose to start your reply m e s sa g e s and press S e l e c t .
with E m p t y s c re e n for a blank message or > Scroll to the folder you want to delete all
O ri g in al t ex t to repeat the original message messages from then press Se lect .
D e l e t e to delete the message you are viewing.
31
Confirm the deletion when prompted. You cannot INFO MESSAGE SERVICE
recover deleted messages. Deleting an e-mail
message from the phone does not delete it from With the info message network service, you can
the e-mail server. receive short text messages from your service
provider on various topics, such as weather and
VOICE MESSAGES traffic conditions. Contact your service provider for
more information.
If you subscribe to voice mail, your service provider
will furnish you with a voice mailbox number. You To enable info message reception:
need to save this number to your phone to use
> From the stand-by display, press M enu .
voice mail. When you receive a voice message,
your phone lets you know by beeping, displaying a > The M e s s ag e s menu is shown, press Se lect .
message, or both. If you receive more than one
message, your phone shows the number of > Scroll to Info me ssa g es and press S e l e c t to
messages received. modify the following information service options:
Unlike text messages, voice messages are > Enter your voice mailbox number and press O K .
managed by your service provider and are stored Modify each of the following parameters with the
on their network, not on your Vertu phone. information supplied by your service provider:
I n f o s e r vi c e Select O n or O f f to activate or
STORING YOUR VOICE MAILBOX NUMBER
deactivate the service, or To p i c i n d e x to
Before you can use the voice mail access features activate index reception.
of your Vertu phone, you need to define your voice To p i c s Enables you to Add , S e l e c t , E d it
mailbox number. Your service provider may and D e l e t e info topics.
automatically set your voice mailbox number from
your SIM card. Contact your service provider to La n g u a g e Select the language in which info
obtain your voice mailbox number. messages are received. The language you
select does not affect the language of your
To enter your voice mailbox number: phone.
> From the stand-by display, press M enu . I n f o t o p ic s sa v e d o n S I M c ard Select
one or more info topics to save to your SIM
> The M es sa g es menu is shown, press S e l e c t .
card.
> Scroll to Vo ic e m e s s ag e s and press S e l e c t .
Rea d Read messages received from your
> Scroll to Vo ic e m a il b ox n u m b er and press service provider. This option only appears if info
S el ec t . messages have been received.
> Enter your voice mailbox number and press O K . If you have an always online GPRS
connection enabled, info messages may not
LISTENING TO YOUR VOICE MESSAGES be received. You should change your GPRS
setting to when needed.
Once your voice mailbox number is defined, you
can use the voicemail key to quickly access you SERVICE COMMANDS
voice mailbox.
Use the service commands editor to enter and
To access your voice mailbox using the menus:
send service requests (also known as USSD
> From the stand-by display, press M enu . commands) to your service provider. Contact your
service provider for information about service
> The M es sa g es menu is shown, press S e l e c t . commands.
> Scroll to Vo ic e m e s s ag e s and press S e l e c t . To send a service command:
> L i s t e n t o v o i c e m e s s a g e s is highlighted, > From the stand-by display, press M enu .
press S ele c t .
> The M e s s ag e s menu is shown, press Se lect .
Once you connect and the prerecorded greeting
begins, follow the automated instructions to listen > Scroll to S e r v i c e c m d s . and press S el ec t .
to your voice messages.
> Enter a service request, such as an activation
command for a specific network service, and
press S end .
32
04 CALL REGISTER Time of c all to display the date and time of the
call.
Send message to send a text or multimedia
message to the number.
View to display the number.
Edit number to edit the number and associate
a name with the number.
Save to enter a name for the number and save
it to your contacts directory.
Add to cont act to add the number to an
existing contact entry (only shown if the number
The call register feature allows you to view is not already associated with a name).
information about calls that you have missed, Delete to clear the number from current call
received and made. You can also view information list.
about the duration and data transfer of your GPRS
data transfer and quantity of messages sent and Call to call the number.
received.
CLEARING THE CALL LISTS
CALLS
To clear the call information from your call register
lists:
The call register stores information about the last
20 missed, 20 received, or 20 dialled calls. It also > From the stand-by display, press Menu .
adds the total duration of all calls. When a list is
> Scroll to the Call register menu then press
full, the most recent call replaces the oldest.
Select .
To ensure that the call register is able to store your
> Scroll to Clear recent c alls then press Select .
received and missed call information, your service
provider must support caller ID, and it must be > Highlight all to clear all call lists, missed to clear
enabled. If the callers number is not available, for the missed calls list, dialled to clear the dialled
example if the caller withheld their number or the calls list or received to clear the received calls
network did not transmit the number, (no list, then press Select . You cannot undo this
number) appears in the calls list. operation.
The call register can only store information about VIEWING CALL DURATION INFORMATION
calls that are received by your Vertu phone. If you
do not have a signal or if your calls are blocked, any To view the length of the most recent call or to view
incoming calls will not be stored. the total duration for all calls:
> From the stand-by display, press Menu .
VIEWING RECENT CALL INFORMATION
> Scroll to the Call register menu then press
To view call information:
Select .
> From the stand-by display, press Menu .
> Scroll to Call duration then press Select .
> Scroll to the Call register menu then press
> Scroll through the following to view your call
Select . durations in hh:mm:ss format:
> Scroll to one of the following and press Select : Last c all duration Shows the duration of
Missed c alls Show the phone numbers of the last call received.
unanswered incoming calls. Received c alls duration Shows the
Received c alls Show the phone numbers of duration of all received calls.
the most recently answered incoming calls. Dialled c alls duration Shows the duration
Dialled numbers Show the most recently of all dialled calls.
dialled numbers. All c alls duration Shows the duration of all
> The call list is displayed, with the most recent call calls (missed, dialled, and received).
listed first. When viewing the call list, the following
options are available:
33
To reset the call duration timers: DATA CONNECTION DURATION
> From the stand-by display, press Menu . To view the information about the duration of the
recent and all GPRS data sessions:
> Scroll to the Call register menu then press
Select . > From the stand-by display, press Menu .
> Scroll to Call duration then press Select . > Scroll to the Call register menu then press
Select .
> Scroll to Clear timers then press Select .
> Scroll to G P RS conn. timer then press
> Enter your security code when prompted then
Select .
press OK . You cannot undo this operation.
> Scroll through the following to view your data
DATA AND MESSAGES session duration in hh:mm:ss format:
The call register stores information about the Duration of last session Shows the
volume of data sent and received in the last GPRS duration of the last GPRS connection.
connection and in total. Additionally the duration of Duration of all sessions Shows the
the last connection and the total of all GPRS data duration of all GPRS connections.
connections are stored. The number of messages
sent and received are also stored. To reset the data duration timers:
> From the stand-by display, press Menu .
DATA COUNTER
> Scroll to the Call register menu then press
To view the information about the volume of data Select .
sent and received via GPRS:
> Scroll to G P RS conn. timer then press
> From the stand-by display, press Menu . Select .
> Scroll to the Call register menu then press > Scroll to Clear timers then press Select .
Select .
> Enter your security code when prompted then
> Scroll to G PR S dat a count. then press press OK . You cannot undo this operation.
Select .
> Scroll through the following to view your data MESSAGE COUNTER
volume usage in bytes: To view the number of text messages sent and
Dat a sent in last session Shows the received:
volume of data sent during the last GPRS > From the stand-by display, press Menu .
connection.
> Scroll to the Call register menu then press
Dat a received in last session Shows the
Select .
volume of data received during the last GPRS
connection. > Scroll to Message counter then press Select .
All sent dat a Shows the volume of all > Scroll through the following to view your message
GPRS data sent. counters:
All received dat a Shows the volume of all Sent messages Shows the number of
GPRS data received. messages that were sent.
To reset the data volume counters: Received messages Shows the number of
messages that were received.
> From the stand-by display, press Menu .
To reset the message counters:
> Scroll to the Call register menu then press
Select . > From the stand-by display, press Menu .
> Scroll to G PR S dat a count. then press > Scroll to the Call register menu then press
Select . Select .
> Scroll to Clear counters then press Select . > Scroll to Message counter then press Select .
> Enter your security code when prompted then > Scroll to Clear counters then press Select .
press OK . You cannot undo this operation.
> Enter your security code when prompted then
press OK . You cannot undo this operation.
34
05 PROFILES AND SETTINGS To quickly change your current profile from the
stand-by display:
> Press the P O W E R key once briefly.
> Scroll to the desired profile then press OK . A
confirmation message is displayed.
To change your current profile using the menus:
> From the stand-by display, press Menu .
> Scroll to the Profiles menu then press Select .
> Scroll to the desired profile then press Select .
> Highlight Activate to use your new profile
You can use the profiles and settings menus to indefinitely or highlight Timed to use the new
change your personal shortcuts, time and date profile for a limited time only, then press Select .
settings, call settings, phone settings, display
> If you selected a timed profile, enter the time when
settings, tone settings, enhancement settings,
you want your new profile selection to end then
security settings, and to restore factory settings.
press OK .
Profiles are an easy way to control the most
> A confirmation message is displayed and your
common groups of settings such as audible and
new profile icon is displayed.
vibrating alerts. Activating alternative profiles
changes all the associated settings quickly and PERSONALISING A PROFILE
easily.
You can customize the default profiles to adjust
All other settings related to how your Vertu phone your Vertu phones characteristics best suit your
operates are managed by through the settings own preferences and situation.
menu.
To personalise a standard profile:
PROFILES
> From the stand-by display, press Menu .
Profiles define how your phone reacts when you > Scroll to the Profiles menu then press Select .
receive a call or a message, how your keypad
sounds when you press a key, and more. Ringing > Scroll to the profile you want to customise then
options, keypad tones, and other settings for each press Select .
of the available profiles can be customised to suit > Highlight Personalise then press Select .
your needs.
> Scroll to one of the following options then press
To help you identify which profile is active, an icon Select to customise the setting:
is shown in the stand-by display, below the signal
Incoming c all alert to select how the phone
and battery strength indicators. Refer to Active
notifies you of an incoming call. You can choose
profile icons on page 6 for more information.
Ringing to play the ringing tone, Ascending if
ACTIVATING A PROFILE you want the volume of the ringing tune to start
low and increase the longer the call is
You can change your profile at any time to ensure unanswered, Ring once to play only one cycle
that your Vertu phones alerts are appropriate to of the ringing tone, Beep once or Off (no
your surroundings. audible alert for an incoming call).
Timed profiles can be used to prevent missed calls. Ringing tone to select the ringing tone for
For example, suppose you attend an event that incoming calls. If you pause for a couple of
requires your phone be set to Silent before the seconds as you scroll through the available
event starts, but you forget to return it to General ringing tones, a sample of the tone is played.
until long after the event. During this time, you have
Ringing volume to set the volume of your
missed several calls because the ringing tone was
ringing tone (1=low, 5=very loud).
silent.
Vibrating alert to turn the vibrating alert on or
With the timed profile feature, you can set a profile
off.
to expire after any length of time up to 24 hours.
When the timed profile expires, your phone Message alert tone to select the tone for
automatically returns to the original profile. received messages.
35
Keypad tones to set the volume of your SETTINGS
keypad tones (off=silent, 1=low, 3=high).
Warning tones to set whether your Vertu
The settings menu enables you to control the core
phone uses an audible alert for giving you functionality of your Vertu phone. Using this feature
warnings, for example when the battery is low. you can define personal shortcuts, adjust time and
date settings, modify phone and call settings,
Alert for to define which caller groups you change your security settings, and restore factory
want your Vertu phone to alert you for when you default settings.
receive a call from someone added to a
specified group. If you receive a call from Refer to theChapter 02 "Security" on page 16
someone who is not included in a specified chapter for more information.
caller group, a calling message appears on the
TIME AND DATE SETTINGS
display, but your Vertu phone remains silent.
To personalise an enhancements profile: Time Settings
> From the stand-by display, press Menu . To adjust your time settings:
> Scroll to the Profiles menu then press Select . > From the stand-by display, press Menu .
> Scroll to Enhancements then press Select . > Scroll to the Settings menu then press Select .
This option is only displayed if an enhancement > Scroll to Time and date and press Select .
has been previously connected.
> Clock is highlighted and the current time is
> Highlight the enhancement you want to configure, shown, press Select .
for example, Headset then press Select .
> Scroll to one of the following options then press
> Scroll to one of the following options then press Select to customise the time settings:
Select to customise the settings:
Show clock to choose if the clock is shown in
Default profile to choose the profile you wish the stand-by display when your Vertu phone is
to use when the enhancement is connected to idle.
your Vertu phone.
Set the time to change the current time. Enter
Automatic answer to answer call the new time in hh:mm format, and press OK . If
automatically after one ring. required, select am or pm .
RENAMING A PROFILE Time zone to change the current time zone
setting. Highlight your new time zone then press
To rename a profile:
Select .
> From the stand-by display, press Menu . Time format to set the time format as am/pm
> Scroll to the Profiles menu then press Select . or 24-hour format (military time).
> Scroll to the profile you want to rename then press Date Settings
Select . You cannot rename the General or
Enhancements profiles. To adjust your date settings:
> Scroll to Profile name then press Select . > From the stand-by display, press Menu .
> Enter a new name for the profile then press > Scroll to the Settings menu then press Select .
Options .
> Scroll to Time and date and press Select .
> Save is highlighted, press Select .
> Scroll to Date , the current date is shown, press
Select .
> Scroll to one of the following options then press
Select to customise the date settings:
Set the date to change the current date. Enter
the new date in the shown format, and press
OK .
Date format to change the format used to
display the date. Highlight your new date format
then press Select .
36
Date separator to change the separator used Organise to change the order of the entries in
to display the date. Highlight your new date the shortcut list. Highlight the entry you want to
separator then press Select . move then press Move . Select the move option
then press Select . When you are finished
Automatic update of date and time modifying your list, press Done . Confirm your
This is a network service. You can set your Vertu changes when prompted.
phone to update the date and time from the Voice commands
network when you turn the phone on. If the clock in
your phone is 30 seconds or more off the network Some of your Vertu phones key functions can be
time, the phone will be updated automatically to voice-activated. This can be particularly practical
reflect the network time. when using the headset as it avoids you needing to
access the phone.
Automatic update of the date and time does not
change the time you have set for the alarm clock, To add a voice command:
calendar, or alarm notes. These are in local time.
> From the stand-by display, press Menu .
Updating may cause some alarms that you have set
to expire. > Scroll to the Settings menu then press Select .
To use automatic date and time update: > Scroll to Pers. shortcuts and press Select .
> From the stand-by display, press Menu . > Scroll to Voice commands and press Select .
> Scroll to the Settings menu then press Select . > Select the desired command folder, scroll to the
command for which you want to add a voice tag,
> Scroll to Time and date and press Select .
then press Options .
> Scroll to Auto-update of date & time , the
> Add command is highlighted, press Select .
current setting is shown, press Select .
> Press St art and speak after the tone. You cannot
> Scroll to one of the following options then press
activate or add a voice command during a call or
Select :
while sending or receiving data over a GPRS
On to update the time automatically. connection.
Confirm first to request confirmation before To use a voice command:
updating the time. You can accept or decline the
> From the stand-by display, press and hold Go to
update.
until Speak now is displayed. If using the
Off to disable automatic updates of time and headset, press and hold the A N S W E R / E N D button.
date.
> Say your command which should be automatically
PERSONAL SHORTCUTS recognized and performed.
You can customise the shortcut list for easy You can also define the settings for (E)GPRS data
access to your favourite functions. You can modify connections. You can then connect the phone to a
the items in the list and change the order in which compatible PC using the data cable and use the
they as accessed. phone as a modem to enable GPRS connectivity
from the PC.
To modify the shortcut menu list:
GPRS
> From the stand-by display, press Menu .
Your Vertu phone can use general packet radio
> Scroll to the Settings menu then press Select . service (GPRS) for high-speed data connections.
> Scroll to Pers. shortcuts and press Select . With GPRS, you can stay connected to the mobile
Internet and allow faster downloads without
> Shortcut options is highlighted, press Select . completing a dial-up connection. GPRS connectivity
> Scroll to one of the following options then press can be used to enhance MMS messaging, Web
Select to customise the shortcut list: browsing sessions, e-mail, and the PC dial-up.
GPRS is typically billed as an always-on function
Select options to change the entries available and you are only charged for the data you transfer.
in the shortcut list. Check the box next to each
entry you want in the list then press Done . Enhanced GPRS (EGPRS), also known as EDGE
Confirm your changes when prompted. (enhanced data rates for GSM evolution) is similar
to GPRS but the connection is much faster.
37
Contact your service provider for more information > Scroll to one of the following divert options then
about supported data connections and tariffs. press Select :
When you have selected GPRS as a data bearer, Divert all voice c alls to forward all calls to
the phone automatically uses EDGE instead of the number you specify.
GPRS if this is available in the network. Divert if busy to forward all calls when you are
To define when a GPRS connection is established: in a call.
> From the stand-by display, press Menu . Divert if not answered to forward all calls to
another number when you do not answer. You
> Scroll to the Settings menu then press Select . can also set a delay before forwarding takes
> Scroll to Connectivity and press Select . place.
> G PR S is highlighted, press Select . Divert if out of reach to forward all calls
when your phone is turned off or out of the
> G PR S connection is highlighted and the coverage area.
current connection setting is shown, press
Select . Divert if not available to forward all calls
when you do not answer, your phone is busy or
> Scroll to either When needed to connect to the turned off, or out of the coverage area. You can
GPRS network only when you use a function that also set a delay before forwarding takes place.
needs the GPRS service, or Always online to
automatically register to a GPRS network when Divert all dat a c alls to forward all data calls
you switch your phone on, if the network is to a data mailbox.
available in your location. Press Select to make > Scroll to one of the following then press Select :
your choice.
Activate to set up the divert. Highlight either
To define the GPRS modem settings: To voice mailb ox or To other number then
press Select . Enter the divert number or select
> From the stand-by display, press Menu .
a contact from your directory then press OK .
> Scroll to the Settings menu then press Select .
Cancel to cancel the divert.
> Scroll to Connectivity and press Select .
Check st atus to check the current status of
> G PR S is highlighted, press Select . the divert. A progress indicator appears,
followed by an information note indicating if the
> Scroll to G PR S modem settings and press
option is active and to which number.
Select .
To cancel all call diversions:
> Scroll to one of the following options then press
Select : > From the stand-by display, press Menu .
Active access point to select the GPRS > Scroll to the Settings menu then press Select .
access point.
> Scroll to Call settings and press Select .
Edit active access point to modify the
> Call divert is highlighted, press Select .
GPRS access point settings.
> Scroll to Cancel all diverts and press Select .
CALL SETTINGS
Cancelling all call diverts may affect your
Call divert ability to receive voice mail messages.
Some service providers may not allow
The call divert feature redirects your incoming calls
cancelling of all diversions. Contact your
to another number, for example your voice mailbox
service provider for specific details.
number.
When a call is diverted your Vertu phone does Anykey answer
not give any indication of an incoming call.
Anykey answer allows you to answer an incoming
call by briefly pressing any key except the P O W E R ,
To manage your call divert settings:
S E L E C T I O N and E N D keys.
> From the stand-by display, press Menu .
To change the anykey answer setting:
> Scroll to the Settings menu then press Select .
> From the stand-by display, press Menu .
> Scroll to Call settings and press Select .
> Scroll to the Settings menu then press Select .
> Call divert is highlighted, press Select .
> Scroll to Call settings and press Select .
38
> Scroll to Anykey answer , the current setting is the display indicates that another call is waiting.
shown, press Select . Press the send key to answer the call. The person
you were speaking to is put on hold. Call waiting
> Highlight On to enable anykey answer, or Off to
may not work correctly if Divert if busy is set.
disable it, then press Select .
> Press the S E N D key to swap between the calls. A
Automatic redial confirmation message is displayed. The person on
Occasionally, your network may experience heavy hold becomes the active call, and the other person
traffic and your call may not be established. With is put on hold.
automatic redial activated, your phone redials the > Press the E N D key to end the active call. A
number up to 10 times, and notifies you once the confirmation message is displayed and the other
network is available. call becomes active.
To change the automatic redial setting: > Press Options then scroll to End all c alls and
press Select to end all calls.
> From the stand-by display, press Menu .
> Scroll to the Settings menu then press Select . Summary after call
> Scroll to Call settings and press Select . Your phone can display the time spent on a call
when you hang up.
> Scroll to Automatic redial , the current setting
is shown, press Select . To change the call summary setting:
> Highlight On to enable automatic redial, or Off to > From the stand-by display, press Menu .
disable it, then press Select . > Scroll to the Settings menu then press Select .
Speed dialling > Scroll to Call settings and press Select .
Single key speed dialling enables you to quickly > Scroll to Summary after c all , the current
dial a number by pressing and holding a single key. setting is shown, press Select .
To change the speed dialling setting: > Highlight On to enable summary after call, or Off
to disable it, then press Select .
> From the stand-by display, press Menu .
> Scroll to the Settings menu then press Select . Send my caller identity
> Scroll to Call settings and press Select . You can prevent your number from being displayed
on the receiving partys caller ID. This feature is a
> Scroll to Speed dialling , the current setting is network service and works on a call-by-call basis.
shown, press Select . Contact your service provider for more information.
> Highlight On to enable speed dialling, or Off to Emergency services and authorised agencies may
disable it, then press Select . be able to obtain your caller ID even when disabled.
If supported by your service provider, call waiting > From the stand-by display, press Menu .
notifies you of an incoming call even while you are > Scroll to the Settings menu then press Select .
in a call. You can accept, reject, or ignore the
incoming call. > Scroll to Call settings and press Select .
To change the call waiting setting: > Scroll to Send my c aller I D , the current setting
is shown, press Select .
> From the stand-by display, press Menu .
> Highlight set by network to let the network
> Scroll to the Settings menu then press Select . determine if your number is sent, On to always
enable your number to be sent, or Off to disable it,
> Scroll to Call settings and press Select .
then press Select .
> Scroll to Call waiting and press Select .
PHONE SETTINGS
> Highlight Activate to enable call waiting,
Cancel to disable it, or Check st atus to display Language
the current setting, then press Select .
Depending upon the location where your Vertu
To use the call waiting feature: phone was purchased, it may provide support for
> When you have a call in progress and you receive multiple languages.
an incoming call, an audible alert is generated and To change your phones language setting:
39
> From the stand-by display, press Menu . > Scroll to Phone settings and press Select .
> Scroll to the Settings menu then press Select . > Scroll to Security keyguard , the current setting
is shown, press Select .
> Scroll to Phone settings and press Select .
> Highlight On to enable the security code
> Phone language is highlighted and the current
request, or Off to disable it, then press Select .
setting is displayed, press Select .
> Scroll to the desired language, or Automatic to Welcome note
match the language setting of your SIM card, then You can write a welcome note that will be
press Select . Changing the language setting may displayed briefly whenever you power up your
also change the time and date formats, depending phone.
on the language you selected.
Predictive text input cannot be used for entering
Memory status welcome note text.
You can check the amount of memory used and To change your welcome note:
currently available in your Vertu phone.
> From the stand-by display, press Menu .
To display your phones memory status:
> Scroll to the Settings menu then press Select .
> From the stand-by display, press Menu .
> Scroll to Phone settings and press Select .
> Scroll to the Settings menu then press Select .
> Scroll to Welcome note and press Select .
> Scroll to Phone settings and press Select .
> Enter the text for the note (44 characters
> Scroll to Memory st atus and press Select . maximum) then press Options .
> Scroll to Free memory or Used memory to > Save is highlighted, press Select .
display the corresponding memory information.
Operator selection
Automatic keyguard
You may be able to manually search for another
You can set the keypad of your phone to lock network which has a roaming agreement with your
automatically after a preset time delay (from 5 home service provider.
seconds to 60 minutes). When the preset delay
expires, the keypad locks automatically. To change your operator selection setting:
When the keyguard is on, calls still may be > From the stand-by display, press Menu .
possible to the official emergency number > Scroll to the Settings menu then press Select .
programmed into your phone. Enter the emergency
number and press the S E N D key. > Scroll to Phone settings and press Select .
> Scroll to Operator selection , the current
To change your automatic keyguard setting:
setting is shown, press Select .
> From the stand-by display, press Menu .
> Highlight one of the following options then press
> Scroll to the Settings menu then press Select . Select :
> Scroll to Phone settings and press Select . Manual allows you to select a network operator
from the list of operators available in your
> Scroll to Automatic keyguard the current
current location.
setting is shown, press Select .
Automatic allows your Vertu phone to select
> Highlight On to enable automatic keyguard, or
the network operator that provides the best
Off to disable it, then press Select .
signal in your current location.
> Enter the delay time before the keypad is locked
(in mm:ss format) then press OK . Confirm SIM service actions
40
> Scroll to Phone settings and press Select .
> Scroll to Confirm S I M service actions , the
current setting is shown, press Select .
> Highlight On to enable SIM service action
confirmations request, or Off to prevent
notifications, then press Select .
Start-up tone
You can set your phone to play (or not to play) the
exclusive Vertu start-up tone when the phone is
switched on.
To change your start-up tone setting:
> From the stand-by display, press Menu .
> Scroll to the Settings menu then press Select .
> Scroll to Phone settings and press Select .
> Scroll to St art-up tone , the current setting is
shown, press Select .
> Highlight On to enable the start-up tone, or Off
to start-up silently, then press Select .
SECURITY SETTINGS
Refer to the Chapter 02 "Security" on page 16
chapter for more information.
41
06 CONTACTS > Scroll to Contacts and press Select .
> Scroll to Settings and press Select .
> With Memory in use displayed, press Select .
> Default memory is displayed.
> Scroll to Phone and SIM and press Select to
save new contacts to the phone and display
contacts from the phone and SIM.
> Scroll to Phone and press Select to save and
display phone contacts.
> Scroll to SIM card and press Select to save
and display SIM card contacts.
Your Vertu phone Contacts directory has potential A message confirms which memory you have
capacity for up to 1,000 entries. selected.
CONTACTS MEMORY If you change the SIM card in your Vertu
phone, the memory type is automatically reset
Contact names and numbers can be stored in the to phone.
phone memory or on the SIM card, or both, but
only one memory can be used at a time. Your Vertu COPYING BETWEEN MEMORIES
phone defaults to the phone memory. The copying feature allows you to copy names and
numbers between the phone memory and the SIM
PHONE MEMORY card memory.
When using the phone memory, contacts are > From the stand-by display, press Menu .
stored in your Vertu phone. Each contact can
contain up to five numbers and five text items, such > Scroll to Contacts and press Select .
as a postal address or an e-mail address. > Scroll to Copy and press Select .
If you use the phone memory you can store more > Select either:
data and access more functions, for example voice > From SIM card to phone to copy all
tags, than if you use the SIM card memory. information from the SIM card memory to your
Vertu phone memory.
SIM CARD MEMORY
> Or From phone to SIM card to copy all
If you select SIM card memory, contacts are stored information from your Vertu phone to the SIM
on your SIM card. Each contact has one card memory.
associated number. The number of contacts and
the length of names and numbers that you can > Press Select .
store on your SIM card is determined by your
service provider.
The SIM card memory is more flexible than the
phone memory because if you transfer the SIM
card to another GSM mobile phone that supports
small SIM cards, you will see all your contacts.
42
COPYING OPTIONS COPYING INDIVIDUAL NUMBERS
The following copying options are displayed: You can also copy individual directory numbers
One by To copy your contacts one at a time between the phone memory and SIM card memory
one by selecting each entry to copy: directly from the list of names in your directory.
> With One by one highlighted, To copy individual numbers:
press Select .
> From the stand-by display, press a S CR O L L
> Scroll to the desired name and key.
press Copy .
> If the contact name is not visible, press the first
> Select Keep original and press letter of the contact name. The first name
Select to keep the contacts in starting with that letter is highlighted. Scroll to
both memories. the desired name and press Details .
> Or select Move original and > Scroll to the required number and press
press Select to delete the original Options .
contact information.
> Scroll to Copy number and press Select .
A message confirms that the contact
> Select Keep original and press Select to keep
has been copied.
All To copy all your contacts in one go: the contacts in both memories.
> With All highlighted, press Select . > Or select Move original and press Select to
delete the original information.
> Select Keep original and press
Select to keep the contacts in A message confirms that the number has been
both memories. copied.
> Or select Move original and
CHECK MEMORY STATUS
press Select to delete the original
information. You can check your phones memory to see how
much information is stored and how much free
A message confirms how many
space is available.
contacts have been copied.
Default To copy only the default numbers To check the memory status:
numbers from your phone memory to your
(Phone SIM card memory. Other numbers in > From the stand-by display, press Menu .
memory the directory that are not set as the > Scroll to Settings and press Select .
only) default are not copied.
> Scroll to Phone settings and press Select .
> Scroll to Default numbers and
43
ACCESSING CONTACTS CONTACT NUMBER AND TEXT TYPES
There are several ways to access a contact, giving (Phone memory only)
you flexibility to use your Vertu phone in the way
The first number added to a contact is
that suits you best.
automatically set as the default number. When you
This chapter uses the first method of select a contact to call or send a message to, this
accessing a contact but you can use any of default number is always used.
the following methods.
You can store up to five numbers for each contact
1 > From the stand-by display, press a from the following five types:
S C R O L L key. > General
> If the contact name is not visible, press the
first letter of the contact name. > Mobile
> The first name starting with that letter is
> Home
highlighted. Scroll to the desired name and
press Details .
2 > From the stand-by display, press Menu . > Office
44
A message confirms that the details have been To set the type of view:
saved to the phone memory.
> From the stand-by display, press Menu .
To add a text item to a contact: > Scroll to Contacts and press Select .
> From the stand-by display, press a S C R O L L > Scroll to Settings .
key.
> Scroll to Contacts view and press Select .
> If the contact name is not visible, press the first
> Scroll to the required view and press Select .
letter of the contact name. The first name
starting with that letter is highlighted. Scroll to A message confirms that the contacts view has
the desired name and press Details . been selected.
> With the contact number highlighted, press THE CONTACTS MENU
Options .
> Scroll to Add detail and press Select . Use can use the options in the Contacts menu to
make a call, send a text message and send a
> Scroll to the type of text you want to add and
business card to anyone whose contact
press Select .
information you have saved. You can also assign
> Key in the text and press OK . numbers to the speed dial list and add voice tags.
A message confirms that the details have been
saved to the phone memory. SEARCHING AND C ALLING
To search for an entry and call the default number:
CHANGING THE DEFAULT NUMBER
> From the stand-by display, press a S CR O L L
(Phone memory only) key.
The first number you add to a contact is > If the contact name is not visible, press the first
automatically set as the default number. If more letter of the contact name. The first name
than one number is added to an entry, for example starting with that letter is highlighted. Scroll to
if the contact has a mobile phone number and an the desired name and press the SE N D key to
office number, you can change the default number. call the number.
To change the default number: To search for an entry and call a number other than
the default number (using the phone memory only):
> From the stand-by display, press a S C R O L L
key. > From the stand-by display, press a S CR O L L
key.
> If the contact name is not visible, press the first
letter of the contact name. The first name > If the contact name is not visible, press the first
starting with that letter is highlighted. Scroll to letter of the contact name. The first name
the desired name and press Details . starting with that letter is highlighted. Scroll to
the desired name and press Details .
> Scroll to the number to set as the default and
press Options . > Scroll to the required number.
> Scroll to Set as default and press Select . > Press the SE N D key to make the call.
A message confirms that the default number has TEXT MESSAGES
been set.
When you have got a contact open you can send
SETTING THE CONTACTS VIEW them a text message without returning to the main
menu.
Your Vertu phone can display your Contacts in
three different ways: SENDING TEXT MESSAGES
> Normal name list displays four contacts at a To send a text message:
time
> From the stand-by display, press a S CR O L L
> Name and number displays one contact key.
with the default number > If the contact name is not visible, press the first
letter of the contact name. The first name
> Name and image displays one contact with starting with that letter is highlighted. Scroll to
an associated image. the desired name and press Details .
45
> Scroll to the required number and press > To send by Bluetooth scroll to Via Bluetooth
Options . and press Select . To send only the phone
> Scroll to Send message and press Select . number scroll to Default number or to send
all the contact details, scroll to All details .
> With Text message highlighted, press Select . Press Select . Your Vertu phone will search
> Key in the message and press Options . for Bluetooth devices. Scroll to the
recipients device on the list and press
> With Send highlighted, press Select .
Select .
> With the phone number displayed, press OK .
A message confirms that the message is being A message confirms that the business card has
sent. been sent.
The phone memory can store additional
contact information such as a persons work
BUSINESS C ARDS
and mobile phone numbers and an
The business card function allows you to send and e-mail address. All this contact information can
receive contact information, via text message, be sent using the All details option. If you
multimedia or Bluetooth. This function can be used are using SIM card memory, you do not have
with both the phone memory and the SIM card this option.
memory, although the SIM card memory only
allows you to send the default number. RECEIVING BUSINESS CARDS
When you receive a business card a message
SENDING BUSINESS CARDS appears on the display. An audible alert sounds if
To send a business card: your Vertu phone is set up for audible alerts.
> From the stand-by display, press a S C R O L L To display a received business card:
key. > Press Show to display the business card.
> If the contact name is not visible, press the first To save a business card to your directory:
letter of the contact name. The first name
starting with that letter is highlighted. Scroll to > Press Save . A message confirms that you have
the desired name and press Details . saved the business card.
> Scroll to the required number and press To discard a business card without saving it:
Options .
> Press Exit .
> Scroll to Send bus. card and press Select .
> Press Yes to confirm.
> Scroll to the transmission method you want to
A message confirms that you have discarded the
use:
business card.
> To send by multimedia message scroll to Via
multimedia and press Select . To send only SPEED DIALLING
the phone number scroll to Default number
The Contacts menu enables you to compile a
or to send all the contact details, scroll to All
speed dial list very quickly. You can have up to
details . Press Select . With Send to
eight numbers programmed in. To dial a number,
highlighted, press Select. With Phone
simply press and hold one of the N U M B E R keys.
number highlighted, press Select . Key in
the recipients number or search the contacts Speed dialling key number 1 might be
list and press OK . A message confirms that unavailable if it is reserved for the voice
the multimedia message has been saved to mailbox.
the outbox for sending.
ADDING NUMBERS TO THE SPEED DIAL LIST
> To send by text message scroll to Via text
message and press Select . To send only To add a number to the speed dial list from within a
the phone number scroll to Default number contact:
or to send all the contact details, scroll to All > From the stand-by display, press a S CR O L L
details . Press Select . Key in the recipients key.
number or search the contacts list and press
OK . A message confirms that the message is > If the contact name is not visible, press the first
being sent. letter of the contact name. The first name
starting with that letter is highlighted. Scroll to
the desired name and press Details .
46
> Scroll to the required number and press > Scroll to the desired speed dial and press
Options . Options .
> Scroll to Speed dial and press Select . > Scroll to Change and press Select .
> Scroll to an empty speed dial key. > Enter the new Phone number by keying it in or
> With the desired key highlighted, press Assign . using the S C R O L L key and press OK .
A message confirms which speed dial number key > Enter the Contact name if creating a new
has been assigned. contact and press OK .
A message confirms which memory the contact
To add a number to the speed dial list using the
has been saved to, and which speed dial number
speed dial menu:
key has been assigned.
This method can add contact details and
assign a speed dial number key at the same DELETING SPEED DIAL NUMBERS
time.
To delete speed dial numbers using the speed dial
> From the stand-by display, press Menu . menu:
> Scroll to Contacts and press Select . > From the stand-by display, press Menu .
> Scroll to Speed dials and press Select . > Scroll to Contacts and press Select .
> Scroll to the desired speed dial key and press > Scroll to Speed dials .
Assign .
> Scroll to the desired speed dial and press
> Key in the Phone number or press Search to Options .
select it from the Contacts list and press OK .
> Scroll to Delete and press Select .
> Enter the Contact name if creating a new
contact and press OK . > Press OK to confirm.
A message confirms which memory the contact A message confirms which speed dial number key
has been saved to, and which speed dial number has been deleted.
key has been assigned.
VOICE TAGS
CHANGING SPEED DIAL NUMBERS Your Vertu phone can make a call to a contact if a
voice tag that has been added to that contact. You
To change speed dial numbers from within a can have up to 25 voice tags programmed in. .
contact:
Very short names do not work for voice tags.
> From the stand-by display, press a S C R O L L Use longer unique names for example Vertu
key. Concierge Service.
> If the contact name is not visible, press the first
letter of the contact name. The first name ADDING VOICE TAGS
starting with that letter is highlighted. Scroll to
To add a voice tag to a contact:
the desired name and press Details .
> Scroll to the required number and press > From the stand-by display, press a S CR O L L
Options . key.
> Scroll to Speed dial and press Select . > If the contact name is not visible, press the first
letter of the contact name. The first name
> A message confirms that a speed dial already starting with that letter is highlighted. Scroll to
exists for the contact. the desired name and press Details .
> Scroll to the desired speed dial key and press > Scroll to the required number and press
Assign . Options .
A message confirms which speed dial number key > With Add voice tag highlighted press Select .
has been assigned.
> Press Start and say the voice tag.
To change speed dial numbers using the speed
> Press Quit when you have finished recording
dial menu:
the voice tag.
> From the stand-by display, press Menu . A message confirms that the voice tag has been
> Scroll to Contacts and press Select . saved.
> Scroll to Speed dials and press Select . The contact details display a speech bubble icon.
47
USING VOICE TAGS > Press Start and say the voice tag.
To make a voice tag call: > Press Quit when you have finished recording
the voice tag.
> Press and hold the down VO L U M E key on the
right side of the phone. A message confirms that the voice tag has
changed.
> Speak the voice tag clearly into the microphone.
To change a voice tag from the voice tag menu:
> The contact is displayed briefly giving you a
chance to Quit if it is incorrect. > From the stand-by display, press Menu .
> The number is dialled automatically. > Scroll to Contacts and press Select .
> Scroll to Voice tags .
DELETING VOICE TAGS
> Scroll to the desired voice tag and press
To delete a voice tag from within a contact: Options .
> From the stand-by display, press a S C R O L L > Scroll to Change and press Select .
key. > Press Start and say the voice tag.
> If the contact name is not visible, press the first > Press Quit when you have finished recording
letter of the contact name. The first name the voice tag.
starting with that letter is highlighted. Scroll to
A message confirms that the voice tag has
the desired name and press Details .
changed.
> Scroll to the required number and press
Options . CALLER GROUPS
> With Voice tag highlighted, press Select .
Use caller groups to allocate contact names to
> Scroll to Delete and press Select . different groups. The group name appears on the
> Press OK to confirm deletion. display when a member of a group calls you. You
can edit the names of the caller groups to be more
A message confirms that the voice tag has been specific, and you can assign a different ringing
deleted. tone to each group for easy recognition of
To delete a voice tag from the voice tag menu: incoming calls. The caller group names are:
CHANGING VOICE TAGS > From the stand-by display, press Menu .
To change a voice tag from within a contact: > Scroll to Contacts and press Select .
> Scroll to Caller groups and press Select .
> From the stand-by display, press a S C R O L L
key. The caller groups are displayed.
> If the contact name is not visible, press the first EDITING C ALLER GROUP NAMES
letter of the contact name. The first name
starting with that letter is highlighted. Scroll to > From the stand-by display, press Menu .
the desired name and press Details . > Scroll to Contacts and press Select .
> Scroll to the required number and press > Scroll to Caller groups and press Select .
Options .
> With Family highlighted, press Select .
> With Voice tag highlighted press Select .
> With Group name on the screen, press Select .
> Scroll to Change and press Select
48
> Key in the name for the new caller group and ADDING CALLER GROUP DETAILS TO A
press OK . CONTACT
A message confirms that the caller group has been To open a contact and add caller group details:
renamed.
> From the stand-by display, press a S CR O L L
ADDING CONTACTS TO AN EMPTY CALLER key.
GROUP > If the contact name is not visible, press the first
To open a caller group and link contacts to it. letter of the contact name. The first name
starting with that letter is highlighted. Scroll to
> From the stand-by display, press Menu . the desired name and press Details .
> Scroll to Contacts and press Select . > Press Options .
> Scroll to Caller groups and press Select . > Scroll to Caller groups and press Select .
> Scroll to the desired group and press Select . > Scroll to the desired group and press Select .
> Scroll to Group members and press Select . A message confirms that the contact has been
> Press Add to display your contacts list. added to the caller group.
> Scroll to the desired name and press Add . DELETING C ALLER GROUP DETAILS FROM A
Repeat for each contact in the caller group. CONTACT
A message confirms that the contact has been
To delete caller group details from a contact:
added to caller group.
> From the stand-by display, press a S CR O L L
ADDING CONTACTS TO A CALLER GROUP key.
To add contacts to a caller group: > If the contact name is not visible, press the first
letter of the contact name. The first name
> From the stand-by display, press Menu .
starting with that letter is highlighted. Scroll to
> Scroll to Contacts and press Select . the desired name and press Details .
> Scroll to Caller groups and press Select . > Press Options .
> Scroll to the desired group and press Select . > Scroll to Caller groups and press Select .
> Scroll to Group members and press Select . > Scroll to No group and press Select .
> On the next screen press Options . A message confirms that the contact has been
> Scroll to Add contact and press Select . removed from the caller group.
> Scroll to the desired name and press Add . SETTING GROUP RINGING TONES
Repeat for each contact in the caller group.
All caller groups initially have a default ringing tone.
A message confirms that the contact has been To set a distinctive ringing tone for each Caller
added to caller group. group:
DELETING CONTACTS FROM A CALLER > From the stand-by display, press Menu .
GROUP > Scroll to Contacts and press Select .
To delete contacts from a caller group: > Scroll to Caller groups and press Select .
> From the stand-by display, press Menu . > Scroll to the desired Caller group and press
Select .
> Scroll to Contacts and press Select .
> Scroll to Caller groups and press Select . > Scroll to Group ringing tone and press
Select .
> Scroll to the desired caller group and press
Select .
> Scroll through the ringing tones to the desired
ringing tone and press Select .
> Scroll to Group members and press Select .
A message confirms that the group ringing tone
> Scroll through the group members to the has been changed from default.
desired contact and press Options .
The default ringing tone for the caller groups is
> With Remove contact highlighted, press the ringing tone set up in the profiles menu.
Select .
A message confirms that the contact has been
removed from the caller group.
49
EDITING CONTACTS Caller Select a caller group and press Select .
groups
Key in the text and press OK .
To edit contact details:
A message confirms that the contact
> From the stand-by display, press a S C R O L L
has been added to the caller group.
key. Send bus. Select a transmission method and
> If the contact name is not visible, press the first card press Select .
letter of the contact name. The first name
Follow the instructions earlier in this
starting with that letter is highlighted.
chapter.
> Scroll to the desired name and press Details . Send Select a type of message and press
Select the desired number and press Options . message Select .
> The following functions are available: Follow the instructions earlier in this
Add voice > Press Start and say the voice tag. chapter.
tag Speed dial Select a speed dial key and press
> Press Quit when you have finished Assign .
recording the voice tag.
A message confirms which speed dial
> A message confirms that the voice
key has been assigned.
tag has been saved. Edit name Press Clear as many times as
The contact details display a speech necessary to delete the characters to
bubble icon. the left of the cursor.
Edit Press Clear as many times as
number necessary to delete the number to the Key in the new name.
left of the cursor. Press OK to save the new name.
View name Select this option to display the contact
Key in the new number.
name.
Press OK to save the new number. Delete Select this option to delete the contact
Delete A message requests confirmation to name and number details.
number delete.
Press OK to confirm.
The number is deleted but the contact
remains.
Copy Select Keep original or Move
number original .
Press Select .
A message confirms that the number
has been copied.
View Select this option to view the contact
number or numbers.
Change Select a new number type and press
type Select .
50
07 ADDITIONS FOLDERS
To browse the folders in your Vertu phone:
> From the stand-by display, press M enu .
51
FOLDER FILES MEDIA
To use the files in your folders:
Your Vertu phone supports playback of a variety of
> From the stand-by display, press M enu . multimedia content using its internal media player.
You can also create new media files using the
> Scroll to A d d it io n s and press S e l e c t . voice recorder. Playback sound quality can be
> G al l e ry is highlighted, press S e l e c t . adjusted using the media equaliser.
> Scroll through your folders to locate your file by MEDIA PLAYER
pressing O p t io n s then O p e n as necessary. A
With the media player you can download, view,
list of files is displayed.
and play compatible images, audio and video files,
> Scroll to a file item, and press O p t i o n s . The and animated images from a variety of sources.
following options are available:
The media player allows you to play streaming
O p en to open the file. videos and streaming audio from a network server.
Streaming functionality is a network service and
D e l e t e to delete the selected file.
requires network support. Check the availability of
S end to send the selected file as a multimedia these services, pricing, and tariffs with your
message or by Bluetooth connection. This network operator or the service provider whose
option is unavailable if the selected file is service you wish to use. Service providers will also
copyrighted. give you instructions on how to use their services.
M o ve to move the selected file into another To use the media player:
folder. After selecting M o ve , scroll to another
folder, and press O p t io n s , M o v e t o f o l d e r is > From the stand-by display, press M enu .
highlighted, then press Se lect . > Scroll to A d d i t io n s and press Se lect .
R e n a m e to rename the selected file.
> Scroll to M e d i a and press S ele c t .
D o w n lo a d s to download images, tones, or
videos. Scroll to G r a p h i c d o w n l d s. , To ne > M e d i a p l a y e r is highlighted, press S e l e c t .
d o w n l o a d s , or Vid e o d o w n l o a d s ; then > The media player is opened scroll to one of the
select a site. Selecting M o re b o o k m a r k s following options then press S e l e c t :
displays the list of bookmarks from the web
browser. O p e n G a l l e r y to open the gallery. From the
When you select D o w n lo a d s , the phone tries gallery, you can play stored audio and video
to connect to the mobile Internet using your files. Refer to Gallery on page 51.
browser and the currently active set of gallery
B o o k m a r k s to open the web bookmarks .
downloads.
Go to add re ss to enter the address of a
D e t a il s to show the name, size, and date of
mobile Internet service, and press O K .
creation of the selected file.
M e d i a d o w n lo a d s to download images,
S o rt to sort the files by name, date, format, or
tones, or videos. Scroll to G r a p h ic d o w n l d s. ,
size.
To n e d o w n lo a d s , or Vi d e o d o w n l o a d s ;
D e l e t e al l to delete all files in the current then select a site. Selecting More
folder. b o o k m a r k s displays the list of bookmarks
O p e n i n s e q u e n c e to view all of the images
from the web browser.
in the folder sequentially as a slide show, or S t rea mi n g s e t t . to set the connection
listen to each of the files in sequence. settings for the media service. Contact your
A d d f o l d e r to create a new folder.
service provider for information about
connection settings. You may receive the
M em o r y s t at u s to check the available streaming settings as a connection settings
memory. message from the Vertu website for your service
A c t i v. key l is t to view the list of available provider.
activation keys. You can delete activation keys if
no longer needed.
52
VOICE RECORDER MEDIA EQUALISER
You can use the voice recorder function to make a The equaliser enhances the sound quality when
short (up to 3 minutes) voice recording. By default, using the media player by amplifying or attenuating
recordings are saved to the R e c o rd i n g s folder. frequency bands. There are five preset equaliser
You can also record your phone calls. settings and two customizable settings.
To make a voice recording: To activate an equaliser set:
> From the stand-by display, press M enu . > From the stand-by display, press M enu .
> Scroll to M ed i a and press Se lect . > Scroll to M e d i a and press S ele c t .
> To start the recording, select R ec o rd then hold > Scroll to the equaliser settings and press
the phone in the normal position near your ear, and O p t io n s .
record your message.
> A c t i v a t e is highlighted, press Se lect .
> To stop the recording, press S t o p . The recording
To customise your equaliser setting:
is saved in the R ec o rd in g s folder of the Gallery.
> From the stand-by display, press M enu .
> To replay the recording, select Pl a y l as t re c. .
> To send the latest recording as a multimedia > Scroll to A d d i t io n s and press Se lect .
message or by Bluetooth connectivity to a > Scroll to M e d i a and press S ele c t .
compatible phone, select S e n d l a s t rec . .
> Scroll to M e d i a e q u a l i s e r and press S e l e c t .
To record a phone call:
> Scroll to the equaliser settings and press
> During a call, press O p t i o n s , scroll to R ec o rd O p t io n s .
then press S ele c t .
The selected set appears in the display with the
While the call is being recorded, all parties to bar on the far left highlighted.
the call can hear a faint beeping alert sound
approximately every 5 seconds. The bars adjust frequencies, from the lowest
(the leftmost bar) to the highest (the rightmost
> To stop recording, press S t o p . The recording is bar). The higher the indicator on a particular bar,
saved in the Re cord ings folder of the Gallery. the more that frequency is amplified.
> Press A d j u st to adjust the lowest frequency.
> Press the S C R O L L U P or S C R O L L D O W N keys to
move the indicator up or down on the bar then
press S ave to store your modification.
> Press the S C R O L L U P and S C R O L L D O W N keys
to move select the next frequency range and press
A d j u s t to perform the next adjustment in the
same way.
> When you are finished, press B a ck .
> To rename the setting, scroll to R e n am e then
press S el ec t . Enter the new name, and press
OK.
53
APPLICATIONS Accessing application options:
> While viewing the application list (as described
Your phone supports Java applications. You will
above) press O p t i o n s then scroll to one of the
find some Java applications a pre-installed on your
following options:
phone. Also, you can manage and download new
applications from your service provider. De lete to delete the application or application
set from your phone.
Running some applications may consume the
battery faster. You may need to connect the phone De t a i ls to show additional information about
to the charger. the application.
54
> From the stand-by display, press M enu . WEB
> Scroll to A d d it io n s and press S e l e c t .
The browser on your phone can display content
> Scroll to A p p li c a t io n s and press S e l e c t . that uses Wireless Mark-up Language (WML) or
extensible Hypertext Mark-up Language (XHTML).
> C o l l e c t i o n is highlighted, press S ele c t . The browser supports WAP 2.0 protocols that run
on TCP/IP protocols.
> Scroll to M em o r y and press S e l e c t .
This feature is a network service. Contact your
EXTRAS service provider for more information.
Your Vertu phone is supplied with three additional Because mobile Internet content is designed to be
utility applications: viewed from your phone, your service provider is
> Calculator The calculator adds, subtracts, now your mobile Internet service provider as well.
multiplies, divides, calculates the square and It is likely that your service provider has created a
the square root, and converts currency home page and set up your browser to go to this
values. page when you log on to the mobile Internet. Once
at your service providers home page, you may find
> Countdown timer The countdown timer is links to a number of other sites.
like an egg-timer or the timer on your
microwave oven. You can enter a specified
time (up to 99 hours and 59 minutes), and
when the time runs out, your phone sounds
an alarm. The countdown timer only works
when the phone is on. Once you turn off your
phone, the timer is no longer active.
55
08 ACCESSORIES For more information about the availability of
accessories approved for use with your Vertu
phone, contact Vertu Concierge.
HEADSET
01 earpiece
03
02 microphone
03 A N S W E R / E N D
This section shows how to use the individual button
01
accessories with your Vertu phone. 02
> Headset (available separately)
To connect the headset to your Vertu phone:
> Charger and battery
> Insert the headset
> Vehicle Charger (available separately) connector into the
bottom of your Vertu
> Data Cable (available separately) phone as shown.
56
CHARGER If the battery is fully discharged it may take a few
moments before the charging indicator appears on
The charger recharges your Vertu phone battery the display.
quickly and safely by means of a powered AC
When the battery is fully charged, the battery
outlet.
charge indicator stops animating and, if your Vertu
The charger supplied with your Vertu phone should phone is switched on, a confirmation message is
be appropriate for your region. However, you briefly displayed.
should always check that electrical rating of the AC
If your Vertu phone is not charging, try the
outlet is appropriate for the charger before you
following:
attempt to plug it in.
> Disconnect the charger from the AC outlet.
Caution. Never attempt to use a charger if it has
been damaged. Contact Vertu Concierge to obtain > Check that the electrical rating of the AC outlet is
a replacement.
compatible with your charger.
Attaching the Cable to the Phone Connector > Verify that the AC outlet has power and that it is
switched on. For example, in many hotel rooms,
> Attach the charger AC outlets are used for lighting and may be
cable by inserting it into switched on and off from remote locations in the
the adaptor body. room.
> Wait for at least 10 seconds and then re-connect
the charger to the AC outlet.
> Use another nearby AC outlet that you know is
providing power.
> If charging still fails, contact Vertu Concierge for
further advice.
The vibrating alert is disabled while the charger is
connected to your Vertu phone.
CHARGING YOUR BATTERY
When you want to stop charging your battery, for
The battery for your Vertu phone is rechargeable
example when charging is complete:
and requires charging at regular intervals.
> Disconnect the charger from the AC outlet.
Caution. Only use the approved charger
and battery designed specifically for your Vertu > Disconnect the charger from your Vertu phone by
phone.
pulling the charger connector do not pull the
> Ensure that you have cable or adaptor body.
attached the charger
The charger can be used in conjunction with the
cable to the correct
data cable. For more information refer to
charger.
Connecting the Data Cable on page 8-60.
> Insert the charger
connector into the BATTERY
bottom of your Vertu
phone as shown. Caution. Do not dispose of batteries in a fire and
always dispose of a battery according to local
regulations. Do not dispose of as household
waste.
> Connect the charger
body to a powered Always switch the phone off and disconnect the
charger before removing the battery.
AC outlet.
> After a few seconds, Removing the Battery
the battery indicator
animates and a > Switch off your Vertu phone and disconnect the
confirmation message charger and any accessories.
is displayed if your
Vertu phone is
switched on.
57
05
01
02
02
> Insert the battery (01) top end first. Ensure that the
contacts on the top end of the battery align with
the contact points (02) inside the battery
compartment.
04
> Gently pivot the battery (04) from the bottom and
lift it upwards and outwards from your Vertu
phone.
58
reduce the capacity and lifetime of the battery.
Always try to keep the battery between 15C and
25C (59F and 77F). If your battery is very hot or
extremely cold, your Vertu phone may not work
temporarily, even if the battery is fully charged.
Battery performance is particularly limited in
temperatures well below freezing.
Caution. Never dispose of batteries in a fire.
Always dispose of batteries according to local
regulations. Please recycle when possible. Do not
dispose of batteries as household waste.
VEHICLE CHARGER
> Pivot and slide the back cover into position until it
clicks into place. The cover should close tightly The vehicle charger is not supplied with your
using only light pressure do not force it closed! If Vertu phone. It is available for purchase from
the cover does not close easily, remove it and all Vertu Stores.
check the battery is correctly inserted.
The vehicle charger recharges your Vertu phone
BATTERY INFORMATION battery quickly and safely from a standard 12 or 24
volt (DC) vehicle cigarette lighter outlet.
Your Vertu phone is powered by a rechargeable
battery. The full performance of a new battery is Only use the vehicle charger specifically designed
achieved only after two or three complete charge for use with your Vertu phone.
and discharge cycles. The battery can be charged Never attempt to use a vehicle charger if it has
been damaged.
and discharged hundreds of times but it will
Only use the vehicle charger in a stationary
eventually wear out. If you notice that the talk and
vehicle.
stand-by times are much shorter than normal, you
may need a new battery. Contact Vertu Concierge The time taken to charge your battery depends on
to acquire a Vertu approved battery. Use only Vertu its existing charge. It takes approximately 90
approved batteries and recharge your battery minutes to charge the battery. You can use your
using only the Vertu approved chargers designed phone normally during the charging process.
for your Vertu phone.
> Attach the charger
cable into the
Charging and discharging adaptor body.
Unplug the charger from the AC outlet and your
Vertu phone when not in use. Do not leave your
Vertu phone connected to a charger.
Overcharging the battery may shorten its lifetime. If
left unused, a fully charged battery will lose its
charge over time. Temperature extremes can affect
the ability of your battery to charge.
59
> Connect the charger to Connecting the Data Cable
the powered cigarette
> Connect the end of
lighter outlet.
the data cable with
> The green indicator light the screws attached
will illuminate to show to the Serial (COM)
the charger is port of your
connected to the power compatible computer,
outlet. A confirmation ensuring it is seated
message is displayed if properly.
your Vertu phone is
> Tighten the screws.
switched on.
> Ensure your
Some cigarette lighter sockets are only powered Vertu phone is
when the vehicle ignition is switched on. switched on.
The vibrating alert is disabled while the charger is > Insert the data cable
connected to your Vertu phone. connector into the
bottom of your Vertu
When the battery is fully charged, the battery phone as shown.
charge indicator stops animating. Disconnect the (Your data cable
car charger from the cigarette lighter outlet before connector may be
you unplug it from your Vertu phone. slightly different to the
one shown.)
CONNECTIVITY
If necessary, with the
When used in conjunction with a compatible data cable inserted, you
computer, the data cable or Bluetooth technology can also connect the
allow you to use the Vertu PC Suite software, charger to your Vertu
supplied on the CD-ROM, to manage your phone phone.
and its data. They also enable you to use your > Plug the charger
60
Bluetooth Enabled PC Requirements Your phone and the computer are now paired and
have an active connection. Switching off either
To pair your Vertu phone and your computer via a device will break the connection. To re-establish
Bluetooth connection, your computer must have the connection from your phone, select the
the appropriate Bluetooth technology equipment computers name in the paired devices list and
and software installed prior to installing Vertu PC press O p t i o n s , scroll to C o n n e c t and press
Suite. S e l e c t , or refer to the Bluetooth applications
To use a Bluetooth technology enabled PC, you documentation.
must have one of the following Bluetooth software
CD-ROM
applications installed:
> Digianswer Bluetooth Software The CD-ROM provided with your Vertu phone
contains the following items:
> Microsoft Windows XP Bluetooth
> Vertu PC Suite (for PC only)
> WIDCOMM Bluetooth for Windows (BTW
> iSync plug-in (for Macintosh only)
1.4.x)
> An electronic version of the Reference
Creating a Bluetooth Connection Manual
Ensure that the Bluetooth-enabled computer is in
pairing mode before attempting to create a > Instructions on setting up your Vertu phone
Bluetooth connection from your Vertu phone. for MMS, browsing and e-mail.
Refer to the Bluetooth applications
documentation for more information. Minimum specifications
To connect your Vertu Phone to the Bluetooth- The Vertu CD-ROM works on a compatible
enabled computer: computer with a CD-ROM drive, with Microsoft
Windows 2000 or Microsoft Windows XP
> From the stand-by display, press M enu . installed. You need at least 250 MB of free disk
> Scroll to S et t i n g s and press Se lect . space and administrator rights to the PC.
> Scroll to C o n n e c t i v i t y and press S ele c t . The Vertu CD-ROM works on a Macintosh
computer with Mac OS X 10.4.6 (or later) and
> C o n n e c t i v i t y is highlighted, press S e l e c t . iSync 2.3 (or later) installed.
> If Bluetooth is not currently enabled, press Vertu PC Suite includes four applications that
S el ec t then scroll to O n and press S e l e c t to extend the functionality of your Vertu phone.
enable it. When request enter your phones
Bluetooth name and press O K . A confirmation PC SUITE APPLIC ATIONS
message is displayed.
Content Copier Allows you to back up and
> Scroll to P a ire d d e v i c e s and press S el ec t . restore phone data, such as
> Ensure pairing mode is enabled on the computer the Contacts and Organiser,
you want to connect to. using a compatible
computer.
> Press N e w to search for the available devices in
range of your Vertu phone. This should take Synchronisation Allows you to synchronise
approximately 15 to 90 seconds depending on the Contacts entries and
number of devices nearby. Organiser notes in your Vertu
phone with Windows
> Scroll through the list and highlight your applications, such as
computers Bluetooth name and then press Microsoft Outlook and
S el ec t . Outlook Express.
> Enter your passcode (you generate your own Modem Connectivity Allows you to use your Vertu
pairing passcode, simply ensure you enter the
phone as a modem for data
same code when prompted on both devices) and
calls, when connected to a
press O K .
compatible computer.
> Enter your Vertu phones passcode on your
computer when prompted. The pairing is now
authorised.
61
Phone Browser Allows you to view the
contents of the Gallery
folder, of your Vertu phone,
on a compatible computer.
You can browse picture and
audio files and transfer files
between your Vertu phone
and a compatible computer.
62
09 ORGANISER TURNING OFF THE ALARM
To turn off a ringing alarm:
> When the alarm sounds press Stop .
If your Vertu phone is switched off when the alarm
sounds, a message asks if you want to switch the
phone on. Press Yes to switch the phone on or
press No to leave the phone switched off.
Do not press Yes when wireless phone use
is prohibited or when it may cause
interference or danger.
> Alarm clock > When the alarm sounds press Snooze .
> The alarm will sound again in 10 minutes.
> Calendar
> If you leave the alarm ringing, it will ring for
about a minute and then go into snooze mood.
> To-do list
SELECTING A RINGING TONE
> Notes
To select a ringing tone:
> Synchronisation
The standard alarm is an ascending chiming
sound. However, you can personalise the alarm by
ALARM CLOCK selecting one of your Vertu ringing tones.
You can set your Vertu phone to sound an alarm at > From the stand-by display, press Menu .
a desired time. The alarm will sound even if your > Scroll to Organiser and press Select .
Vertu phone is switched off.
> With Alarm clock highlighted, press Select .
SETTING THE ALARM > Scroll to Alarm tone and press Select .
To set the alarm: > Highlight Ringing tone and press Select .
> From the stand-by display, press Menu . > Scroll to the ringing tone you want to use and
press Select .
> Scroll to Organiser and press Select .
A message confirms that you have selected an
> With Alarm clock highlighted, press Select .
alarm tone.
> With Alarm time highlighted, press Select .
REPEATING THE ALARM
> Key in the time you want the alarm to sound and
press OK . To repeat the alarm on certain days:
A message confirms that the alarm is on and a > From the stand-by display, press Menu .
small bell icon is visible on the stand-by display.
> Scroll to Organiser and press Select .
CANCELLING THE ALARM > With Alarm clock highlighted, press Select .
To cancel the alarm: > Scroll to Repeat alarm and press Select .
> From the stand-by display, press Menu . > Scroll to Repetition days and press Select.
> Scroll to Organiser and press Select . > Highlight each day and select Mark to repeat
the alarm or Unmark to cancel the alarm.
> With Alarm clock highlighted, press Select .
> Press Done when you have finished.
> With Alarm time highlighted, press Select .
> A message confirms that alarm repetition is on.
> Scroll to Off and press OK .
A message confirms that the alarm is off. If you unmark all days, alarm repetition
switches off.
63
CANCELLING THE ALARM REPETITION > Reminder - enables you to save a title for
the reminder and set an alarm.
To cancel alarm repetition:
> From the stand-by display, press Menu . > Highlight the type of note you want to create
and press Select .
> Scroll to Organiser and press Select .
> To create a Meeting note key in Subject or
> With Alarm clock highlighted, press Select .
or press Options to select a name from the
> Scroll to Repeat alarm and press Select . Contacts list. Key in Loc ation, St art date ,
> With Off highlighted, press Select. St art time , End date , End time and select
an alarm type if required.
> A message confirms that alarm repetition is off.
You will see the following options: > From the stand-by display, press Menu .
> Meeting - enables to you save the following > Scroll to Organiser and press Select .
details about a meeting: subject, location, > Scroll to Calendar and press Select .
start and finish date and times and set an
> With the required day highlighted, press
alarm.
Options .
> Call - enables to you save the following > With Day notes highlighted, press Select.
details about a phone call: phone number, > The notes will be displayed.
name and time details and set an alarm.
> Scroll to a note and press Options .
> Birthday - enables to you save the following > With View highlighted, press Select to open
details about a birthday: name, year of birth, the note.
and set an alarm.
Viewing notes for a week
> Memo - enables to you save the following To view notes for a week:
details about a memo: subject, start date,
end date and set an alarm. > From the stand-by display, press Menu .
> Scroll to Organiser and press Select .
> Scroll to Calendar and press Select .
64
> Press Options . MOVING NOTES
> Scroll to Week view and press Select . You can move a note to a different date and time.
> A grid displays the week and shows any notes. To move a note:
DELETING NOTES > From the stand-by display, press Menu .
You can delete notes one at a time or all together > Scroll to Organiser and press Select .
> A message confirms that all the notes have You can repeat a note daily, weekly, every two
been deleted. weeks, monthly or yearly.
> From the stand-by display, press Menu . > From the stand-by display, press Menu .
> Scroll to Organiser and press Select . > Scroll to Organiser and press Select .
> Scroll to Calendar and press Select . > Scroll to Calendar and press Select .
> Press Options . > With the required day highlighted, press
Options .
> Scroll to Delete all notes and press Select .
> With Day notes highlighted, press Select to
> Scroll to the required note and press Options .
display the notes.
> Scroll to Delete and press Select .
> Scroll to the required note and press Options .
> Press OK in response to the question.
> Scroll to Repeat and press Select .
> A message confirms that the note has been
> Scroll to the option you require and press
deleted.
Select .
EDITING NOTES > Set end date if necessary or highlight No end
date and press Select.
To edit a note:
> A message confirms that the note has been
> From the stand-by display, press Menu . saved.
> Scroll to Organiser and press Select .
SENDING NOTES
> Scroll to Calendar and press Select .
> With the required day highlighted, press You can send a note to another phone using
Options .
Bluetooth or the messaging service or convert it to
a message.
> With Day notes highlighted, press Select.
To send a note as a text message:
> The notes will be displayed.
> Scroll to the required note and press Options . > From the stand-by display, press Menu .
> Scroll to Edit and press Select to open the > Scroll to Organiser and press Select .
note for editing. > Scroll to Calendar and press Select .
> Edit the fields and alarm requirement as in To > With the required day highlighted, press
make a note, above. Options .
65
> With Day notes highlighted, press Select to > With the required day highlighted, press
display the notes. Options .
> Scroll to the required note and press Options . > With Day notes highlighted, press Select to
> Scroll to Send note and press Select . display the notes.
> Scroll to Send as message and press > Scroll to the required note and press Options .
Select . > Scroll to Copy and press Select .
> Highlight Via multimedia or Via text > Key in the new date and press OK .
message , depending on your preferred
> Key in the new time and press OK .
method. See Chapter 3 for more information.
> A message confirms that the note has been
To send a note using the calendar: copied.
> From the stand-by display, press Menu .
COPYING A TEXT MESSAGE TO A
> Scroll to Organiser and press Select . CALENDAR NOTE
> Scroll to Calendar and press Select .
You can save a text message to your calendar as a
> With the required day highlighted, press reminder.
Options .
> To copy a text message to the calendar
> With Day notes highlighted, press Select to
display the notes. > From the stand-by display, press Menu .
> Scroll to the required note and press Options . > With Messages highlighted, press Select .
> Scroll to Send note and press Select . > With Text Messages highlighted, press
Select .
> Scroll to Via c alendar and press Select .
> Scroll to Inb ox and press Select .
> Key in the phone number or press Search to
use the Contacts list. > Scroll to the required text message and press
Select .
> Press OK to send the note.
> Press Options .
> A message confirms that the note is being sent.
> Scroll to Copy to c alendar and press Select .
To send a note using Bluetooth:
> Key in the date and press OK .
> From the stand-by display, press Menu .
> A message confirms that the note has been
> Scroll to Organiser and press Select . saved.
> Scroll to Calendar and press Select .
NOTE SETTINGS
> With the required day highlighted, press
Options . On the Settings menu you can change the
following characteristics of the Calendar:
> With Day notes highlighted, press Select to
display the notes. > Set the date
> Scroll to the required note and press Options .
> Set the time
> Scroll to Send note and press Select .
> Scroll to Via Bluetooth and press Select . > Select a Time zone
> Highlight the device you want to send the note > Select a Date format
to, and press Select .
> A message confirms that the note is being sent. > Select a Date separator
66
> Scroll to Organiser and press Select . > Highlight the required date format and press
Select .
> Scroll to Calendar and press Select .
> With the calendar displayed, press Options . A message confirms that the date format has been
selected.
> Scroll down to Settings and press Select .
Selecting a date separator
> With Set the date highlighted, press Select .
> Key in the new date and press OK . You can use a dot, or a forward slash or a dash or
a space as a date separator.
> A message confirms that the date has been set.
To select a date separator:
Setting the time
> From the stand-by display, press Menu .
> To set the time:
> Scroll to Organiser and press Select .
> From the stand-by display, press Menu .
> Scroll to Calendar and press Select .
> Scroll to Organiser and press Select .
> With the calendar displayed, press Options .
> Scroll to Calendar and press Select .
> Scroll to Settings and press Select .
> With the calendar displayed, press Options .
> Scroll to Date Separator and press Select .
> Scroll to Settings and press Select .
> Highlight the required date separator and press
> Scroll to Set the time and press Select . Select .
> Key in the new time and press OK . A message confirms that the date separator has
A message confirms that the time has been set. been selected.
You can select time zones from GMT-12 to Your Vertu phone can display the time in 12 hour
GMT+12. There are 34 time zones to choose from. or 24 hour format.
> From the stand-by display, press Menu . > From the stand-by display, press Menu .
> Scroll to Organiser and press Select . > Scroll to Organiser and press Select .
> Scroll to Calendar and press Select . > Scroll to Calendar and press Select .
> With the calendar displayed, press Options . > With the calendar displayed, press Options .
> Scroll to Settings and press Select . > Scroll to Settings and press Select .
> Scroll to Time zone and press Select . > Scroll to Time format and press Select .
> Highlight the required time zone and press > Highlight the required time format and press
Select . Select .
A message confirms that the time zone has been A message confirms which clock has been
selected. selected.
Your Vertu phone can display the date in a variety The calendar can display the week starting on
of formats: day first, month first, the month in words Saturday, Sunday or Monday.
or in numbers.
To select a day that the week starts on:
To select a date format:
> From the stand-by display, press Menu .
> From the stand-by display, press Menu . > Scroll to Organiser and press Select .
> Scroll to Organiser and press Select . > Scroll to Calendar and press Select .
> Scroll to Calendar and press Select . > With the calendar displayed, press Options .
> With the calendar displayed, press Options . > Scroll to Settings and press Select .
> Scroll to Settings and press Select . > Scroll to Week st arts on and press Select .
> Scroll to Date format and press Select . > Highlight the required day and press Select .
A message confirms which day the week starts on.
67
Auto-deleting notes > A message confirms that the To-do note is
saved.
Your Vertu phone can delete notes automatically.
Notes can be deleted after one day, one week or To change the priority, view the to-do note and
one month. select the deadline option. You can also mark
notes as done, edit and delete them.
To auto-delete notes:
DELETING A TO-DO LIST
> From the stand-by display, press Menu .
To delete a to-do list
> Scroll to Organiser and press Select .
> Scroll to Calendar and press Select . > From the stand-by display, press Menu .
> With the calendar displayed, press Options . > Scroll to Organiser and press Select .
> Scroll to Settings and press Select . > Scroll to To-do list and press Select .
> Scroll to Auto-delete notes and press > Scroll to the desired to-do note and press
Select . Options .
> Highlight the required frequency, or Never and > Scroll to Delete or Delete all and press
press Select . Select .
> Scroll to To-do list and press Select . > Scroll to Organiser and press Select .
> Any to-do notes will be displayed. > Scroll to Notes and press Select .
> Press Options .
CREATING A TO-DO LIST
> Scroll to Make a note and press Select .
To create a to-do list: > Key in the note and press Options .
> From the stand-by display, press Menu . > With Save highlighted, press Select .
> Scroll to Organiser and press Select . > A message confirms that the note is saved.
> Scroll to To-do list and press Select .
VIEWING NOTES
> Press Options .
To view a note:
> With Add highlighted, press Select .
> Key in Subject details and press Options . > From the stand-by display, press Menu .
> With Save highlighted, press Select . > Scroll to Organiser and press Select .
> Highlight High , Medium or Low priority and > Scroll to Notes and press Select .
press Select . The priority determines where the > Scroll to the note you want to view and press
to-do note will be displayed in your list of to-do Options .
notes. High priority notes are displayed at the > With View highlighted, press Select to open
top of the list, whilst low priority notes are the note.
displayed at the bottom of the list.
> The note will open and you can view it.
68
EDITING NOTES > Highlight Via multimedia or Via text
message , depending on your preferred
To edit a note:
method and send as you would normally -
> From the stand-by display, press Menu . please see Chapter 3 for more information.
> Scroll to Organiser and press Select . To send a note using Bluetooth:
> Scroll to Notes and press Select . > From the stand-by display, press Menu .
> Scroll to the note you want to edit and press > Scroll to Notes and press Select .
Options .
> Scroll to the note you want to send and press
> Scroll to Edit and press Select . Options .
> Make required changes to the note and press > Scroll to Send note and press Select .
Options .
> Scroll to Via Bluetooth and press Select .
> With Save highlighted, press Select .
> Highlight the device you want to send the note
> A message confirms that the note is saved. to, and press Select .
> Scroll to the note you want to send and press > A message confirms which set has been
Options . activated.
> Scroll to Send note and press Select . Note that synchronising for the first time or
after an interrupted synchronisation may take
> With Send as message selected, press up to 30 minutes to complete, if the contacts
Select . or calendar are full.
69
SYNCHRONISATION SETTINGS
You can receive the synchronisation settings as a
configuration message from the service provider or
you can key them in manually.
To key in the synchronisation settings manually:
> From the stand-by display, press Menu .
> Scroll to Organiser and press Select .
> Scroll to Synchronisation and press Select .
> Scroll to Settings and press Select .
> Scroll to Edit active Internet sync settings
and press Select .
> Key in the required information for each of the
following settings:
> Settings name
> Password
70
10 ADDITIONAL INFORMATION PACEMAKERS
Pacemaker manufacturers recommend that a
minimum separation of 15 cm (6 inches) be
maintained between a hand-held wireless phone
and a pacemaker to avoid potential interference
with the pacemaker. These recommendations are
consistent with the independent research by and
recommendations of Wireless Technology
Research.
Persons with pacemakers:
> Should always keep the phone more than
15 cm (6 inches) from their pacemaker when
SAFETY INFORMATION the phone is switched on;
71
Do not store or carry flammable liquids, gases or WATER RESISTANCE
explosive materials in the same compartment as
The accessories designed to be used with your
the phone, its parts or accessories.
Vertu phone should never be used when damp or
For vehicles equipped with an air bag, remember wet.
that an air bag inflates with great force. Do not > You can use your Vertu phone in the rain, but do
place objects, including both installed or portable not submerge it in water.
wireless equipment in the area over the air bag or
in the air bag deployment area. If in-vehicle > Before opening the back cover, dry your Vertu
wireless equipment is improperly installed and the phone to prevent water from reaching the interior.
air bag inflates, serious injury could result. The SIM card and battery are not water resistant.
> Never charge your Vertu phone when the
AIRCRAFT accessories connector is wet or damp.
Switch off your phone before boarding an aircraft.
> Never use accessories when your Vertu phone is
The use of wireless telephones in an aircraft may
wet or damp.
be dangerous to the operation of the aircraft,
disrupt the wireless telephone network and may be Make sure the interior of your Vertu phone and
illegal. In the United States, FCC regulations the back cover seals are dry, clean, and free of
prohibit using your Vertu phone while in the air. any foreign objects. Foreign objects may
damage the seals against water.
Failure to observe these instructions may lead to
suspension or denial of telephone services to the
offender, or legal action or both.
POSTED FACILITIES
SPECIFICATIONS
Switch your phone off in any facility where posted
notices so require.
Volume 78 cc
POTENTIALLY EXPLOSIVE ATMOSPHERES
Switch off your phone when in any area with a Weight 173 g
potentially explosive atmosphere and obey all signs
Length 108 mm
and instructions. Sparks in such areas could cause
an explosion or fire resulting in bodily injury or even Width 43 mm
death.
Thickness 21.5 mm
Users are advised to switch off the phone when at
a refuelling point (service station). Users are POWER MANAGEMENT
reminded of the need to observe restrictions on the
use of radio equipment in fuel depots (fuel storage
Battery Capacity 780 mAh
and distribution areas), chemical plants or where
blasting operations are in progress. Maximum talk time 2.5 to 4 hrs**
Areas with a potentially explosive atmosphere are
Maximum stand-by Up to 150 hrs**
often but not always clearly marked. They include
below deck on boats; chemical transfer or storage **Network dependent. Variation in operating time
facilities; vehicles using liquified petroleum gas will occur depending on usage and location.
(such as propane or butane); areas where the air
contains chemicals or particles, such as grain, dust
or metal powders; and any other area where you
would normally be advised to turn off your vehicle
engine.
72
CARE AND MAINTENANCE Avoid the following:
> Contact with chemicals such as solvents,
Your Vertu products have been crafted from some
alkaline and acid solutions, cola-based drinks
of the finest materials and care should be taken to
and prolonged exposure to salt water. Wipe
keep them in good condition.
with a clean, soft cloth as soon as possible if
Damage caused to your Vertu phone by failing to contact occurs.
observe these care instructions is not covered by
the warranty. > Contact with sharp objects.
CERAMICS AND SAPPHIRE
> Dropping or knocking against hard surfaces.
Ceramics and sapphire are very hard materials but
are also brittle and can be scratched by harder THE MICROFIBRE POLISHING CLOTH
materials or objects. Furthermore, they can be
The microfibre polishing cloth is hand washable
damaged if dropped.
and is provided for polishing the surfaces and
Avoid the following: removing fingerprints. The surface MUST be free
from dust before polishing as dust particles may
> Contact with other hard objects and damage metal surfaces when polished.
materials such as diamond rings, nail files,
sand paper, abrasives, quartz crystals, metal Jewellery cleaner must not be used as this
oxides, nitrides and carbides. may affect the mechanics of the product and
invalidate the warranty.
> Dropping or knocking the product on
hard surfaces. GENERAL CARE TIPS
> Do not use or store your Vertu phone in
> Repeated rubbing against hard surfaces. dusty, dirty areas. Its moving parts and
electronic components can be damaged.
LEATHER
All Vertu leather products are made by expert > Do not store your Vertu phone in hot areas.
craftsmen. Each leather hide is unique and has its High temperatures can shorten the life of
own natural characteristics which should be electronic components and damage
considered part of the individuality of fine leather batteries.
and not as imperfections or flaws. All leather can
be damaged and should be treated with care. > Do not store your Vertu phone in cold areas.
When your Vertu phone returns to its normal
Avoid the following: temperature, moisture can form inside and
damage the electronics.
> Prolonged exposure to water and
high humidity.
> Do not attempt to open your Vertu phone
other than as instructed in this guide.
> Dropping, rubbing or knocking on
hard surfaces.
> Do not drop, knock, or shake your Vertu
phone. Rough handling can break internal
> Exposure to extreme temperatures.
circuit boards and fine mechanics, as well as
damage the exterior of your Vertu phone.
> Contact with oily substances, make-up and
solvents.
METAL
Vertu metals are finished to a high standard and
care needs to be taken to maintain their
appearance. Vertu precious metals have a high
tarnish resistance but will need polishing to remove
fingerprints. Protect in soft cases where possible
and polish only with a Vertu recommended
polishing cloth.
73
INDEX
A CALL REGISTER 33
ACCESSING CONTACTS 44 dialled numbers 33
missed calls 33
ACCESSORIES 56 received calls 33
charger 57 CALL SETTINGS 38
headset 56
ADD DETAIL 50 CALLER
ID 39
ADD NUMBER 50
CALLER GROUP
ADD VOICE TAG 50 Alert for 36
ADDING A VOICE COMMAND 37 CALLER GROUP NAMES 48
ADDING CONTACTS 43 CALLER GROUPS 49, 50
ADJUST adding names 49
equalizer 53 deleting names 49
ALARM CLOCK 63 editing 48
names 48
cancelling the alarm 63, 64
ringing tones 49
repeating the alarm 63
viewing 48
ringing tone 63
setting the alarm 63 CALLING CONTACTS 45
snooze function 63 CALLS
turning off 63 answering 8
ALL RECEIVED DATA 34 emergency 10
ALL SENT DATA 34 ending or rejecting 8
CANCELLING THE ALARM 63
ANSWERING CALLS 8
CHANGE
ANYKEY ANSWER 38
audio settings 53
APPLICATIONS MENU 54, ??
CHANGE TYPE 50
ARCHIVE FOLDER 31
CHANGING THE DEFAULT NUMBER 45
AUTOMATIC
CHARGER 57
redial 39
update of date and time 37 CHARGING
AUTOMATIC ANSWER 36 battery 57
CLOCK
B setting 4
BASIC TEXT INPUT 12, ?? COMPUTER, CONNECTING TO 59
BATTERY 57 CONCIERGE 11
charge indicator 6 CONCIERGE KEY 11
charging 57 CONFERENCE CALLS 9
installation 2, 58
CONFIRM SIM SERVICE ACTIONS 40
removal 57
BLOCKED PIN 19 CONNECTIVITY 37
GPRS 37
BLOCKED PIN2 20
CONTACT
BUSINESS CARDS add detail 50
receiving 46 add number 50
sending 46 add voice tag 50
caller groups 50
C change number type 50
CALENDAR 64 delete 50
auto-delete notes 68 delete number 50
copy a text message to a note 66 edit name 50
copying notes 66 edit number 50
deleting notes 65 send business card 50
editing notes 65 send message 50
making notes 64 set number as default 50
moving notes 65 speed dial 50
note settings 66 view 50
opening 64 view name 50
repeating notes 65 CONTACTS
sending notes 65 accessing 44
set date 66 adding 43, 44
set date format 67 adding caller group details 49
set date separator 67 adding information 44
set start of week 67 calling 45
set time 67 changing the default number 45
set time format 67 copying 43
set time zone 67 copying all at once 43
viewing notes 64 copying default numbers 43
CALL copying one by one 43
record 53 deleting 44
waiting 39 deleting caller group details 49
editing 50
CALL ALERTS 35 number types 44
CALL DIVERT 38 searching 45
CALL LISTS 33 setting the view 45
speed dialling 46
Index
text messages 45 Other folders 31
text types 44 Outbox 28
voice tags 47 Saved items 29
CONTACTS MENU 45 Saved messages 23
Sent items 23, 28
CONTACTS VIEW Templates 23
setting 45 text message 23
COPYING CALENDAR NOTES 66 FOLDERS
COPYING CONTACTS 42, 43 gallery 51
CREATING NOTES 68 FORWARDING CALLS 38
CREATING TO-DO LIST 68
G
D GALLERY 51, ??
DATA CABLE 59 GPRS CONNECTIVITY 37
DATA CONNECTION DURATION 34
H
DATA COUNTER 34
HEADSET 56
DATA RECEIVED IN LAST SESSION 34
HOLDING YOUR PHONE 8
DATA SENT IN LAST SESSION 34
DATE FORMAT 36 I
DATE SEPARATOR 37 ICONS
DEFAULT CALLER GROUP RINGING TONE 49 display 6
DEFAULT NUMBER 45 IN CALL FUNCTIONS 9
DEFAULT RINGING TONE 49 INBOX FOLDER 23, 28, 31
DELETE 50 INDICATORS 6
DELETE NUMBER 50 battery charge 6
signal strength 6
DELETING CALENDAR NOTES 65
INFO
DELETING CONTACTS 44
message service 32
DELETING NOTES 69 INSTALLATION
DELETING TO-DO LIST 68 battery 2, 58
DIALLED CALLS DURATION 33 SIM card 2
DIALLED NUMBERS 33 INTERNATIONAL CALLS 8
DIALLING 8
K
DISPLAY
KEYPAD 3
language 39
lock 11
DISPLAY ICONS 6 unlock 11
DISTRIBUTION LISTS 23 KEYPAD TONES 36
DOWNLOAD KEYS
applications 54 Concierge 1
DOWNLOADING E-MAIL 31 power 3
DRAFTS 31 selection 1, 3, 14
DURATION OF ALL SESSIONS 34 L
DURATION OF LAST SESSION 34 LANGUAGE 39
LAST CALL DURATION 33
E
LAST NUMBER REDIAL 9
EDIT NAME 50
LOCKING, KEYPAD 11
EDIT NUMBER 50
EDITING CALENDAR NOTES 65 M
EDITING CONTACTS 50 MAKING A CALL 8
EDITING NOTES 69 MAKING CALENDAR NOTES 64
E-MAIL MEDIA
reading 31 equalizer 53, ??
E-MAIL 29 player 52
E-MAIL MESSAGES voice recorder 53
erasing multiple 31 MEMORY
sending 30 copying contacts 42
E-MAIL SETTINGS 29 phone memory 42
selecting type 42
EMERGENCY CALLS 10
SIM card 42
EQUALIZER 53, ?? MESSAGE COUNTER 34
ERASING MESSAGES
multimedia messages 29, 31 distribution lists 23
text messages 24 e-mail 29
info message service 32
F linked 21
FOLDERS multimedia 25
E-mail 31 send 21
Inbox 23, 28, 31 service commands 32
MMS 28 text 21
My folders 23 MICROPHONE 1
Index
MISSED CALLS 33 RECORD
MMS calls 53
settings 26 REJECTING CALLS 8
MODEM, USING YOUR PHONE AS 59 REMOVING
MOVING CALENDAR NOTES 65 battery 57
MULTIMEDIA MESSAGES RENAMING
erasing multiple 29 profiles 36
reading 28 REPEATING CALENDAR NOTES 65
sending 27 RESTORE FACTORY SETTINGS 41
MULTIMEDIA MESSAGES 25 RING TONE 35
MY FOLDERS 23 RING VOLUME 35
RINGING TONES
N
caller groups 49
NAMES, SEE CONTACTS 44 RINGING TUNE
NETWORK SERVICES setting 35
conference calls 9
NOTE SETTINGS 66 S
NOTES 68 SAVED ITEMS FOLDER 29
creating 68 SAVED MESSAGES FOLDER 23
deleting 69
editing 69 SCREEN SAVER 14
sending 69 SCREEN SAVER DELAY 14
viewing 68 SEARCHING FOR CONTACTS 45
NUMBER KEYS 3 SECURITY 16, 21, 35, 51
NUMBER TYPES 44 SECURITY CODES 19
NUMBERS SECURITY SETTINGS 41
copying 43
SELECTING MEMORY TYPE 42
O SEND
OPENING THE CALENDAR 64 caller ID 39
text messages 21
OPENING TO-DO LIST 68
SEND BUSINESS CARD 50
OPERATOR SELECTION 40
SEND MESSAGE 50
ORGANISER 63
SENDING BUSINESS CARDS 46
alarm clock 63
calendar 64 SENDING CALENDAR NOTES 65
notes 68 SENDING NOTES 69
synchronisation 69 SENDING TEXT MESSAGES 45
OUTBOX FOLDER 28, 31
SENT ITEMS FOLDER 23, 28, 31
P SENT MESSAGES 34
PAUSE AND WAIT COMMANDS SERVICE
options 9 commands 32
PERSONAL SHORTCUTS 37 SET
time and date 36
PERSONALISING PROFILES 35
SET AS DEFAULT 50
PHONE
SET THE DATE 36
memory 40
PHONE MEMORY 42 SET THE TIME 36
checking status 43 SETTING
PIN BLOCKED 19 time 4
PIN CODE 19 SETTING THE ALARM 63
entering your 4 SETTINGS
PIN2 BLOCKED 20 call 38
connectivity 37
PIN2 CODE 20 personal shortcuts 37
PLAYER phone 39
media 52 restore factory settings 41
PREDICTIVE TEXT INPUT 13, ??, 13, ??, 14, ?? security 41
time and date 36
PROFILES
SHORTCUT MENU 37
activating 35
personalising 35 SHORTCUTS
PROFILES 35 personal 37
PUK 19 SHOW CLOCK 36
PUK2 20 SIGNAL STRENGTH INDICATOR 6
SIM CARD
R changing the 4
installation 2
READING MULTIMEDIA MESSAGES 28
SIM CARD MEMORY 42
RECEIVE E-MAIL 31 checking status 43
RECEIVED CALLS 33 SNOOZE FUNCTION 63
RECEIVED CALLS DURATION 33 SPEAKER PHONE 9
RECEIVED MESSAGES 34 SPEED DIAL 50
RECEIVING BUSINESS CARDS 46
Index
SPEED DIALLING 39, 46
adding numbers 46
changing numbers 47
deleting numbers 47
START-UP TONE 41
SUMMARY AFTER CALL 39
SWITCHING ON 3
SYNCHRONISATION 69
T
TEMPLATES FOLDER 23
TEXT
messages 21
TEXT MESSAGE
copying to a calendar note 66
TEXT MESSAGES
alert tones 35
erasing multiple 24
predictive text input 13
reading 22
sending 22, 45
settings 24
TEXT TYPES 44
TIME
setting 4
TIME FORMAT 36
TIME SETTINGS 36
TIME ZONE 36
TO-DO LIST
creating 68
deleting 68
opening 68
Organiser
to-do list 68
TURNING OFF THE ALARM 63
U
UNLOCKING, KEYPAD 11
USING A VOICE COMMAND 37
V
VERTU CONCIERGE 11
VIBRATING 35
VIEW CONTACT NUMBER 50
VIEW NAME 50
VIEWING CALENDAR NOTES 64
VIEWING CONTACTS 45
VIEWING NOTES 68
VOICE 37
VOICE
messages 32
recorder 53
VOICE TAGS 47
adding 47
changing 48
deleting 48
using 48
VOICEMAIL 10, 32
VOLUME
adjusting 8
W
WARNING TONES 36
WELCOME NOTE 40
WRITING E-MAIL MESSAGES 30
WRITING MULTIMEDIA MESSAGES 27
WRITING TEXT MESSAGES 22
using predictive text input 13
Index