This document discusses advanced heat and mass transfer concepts including the importance of heat transfer, methods of heat transfer analysis such as implicit and explicit techniques, modes of mass transfer, heat conduction, fluid flow concepts, and applications of empirical relations. It also provides examples of calculating heat transfer coefficients, determining layer interface temperatures and heat loss for composite walls, and analyzing two-dimensional steady state and transient heat conduction situations.
This document discusses advanced heat and mass transfer concepts including the importance of heat transfer, methods of heat transfer analysis such as implicit and explicit techniques, modes of mass transfer, heat conduction, fluid flow concepts, and applications of empirical relations. It also provides examples of calculating heat transfer coefficients, determining layer interface temperatures and heat loss for composite walls, and analyzing two-dimensional steady state and transient heat conduction situations.
This document discusses advanced heat and mass transfer concepts including the importance of heat transfer, methods of heat transfer analysis such as implicit and explicit techniques, modes of mass transfer, heat conduction, fluid flow concepts, and applications of empirical relations. It also provides examples of calculating heat transfer coefficients, determining layer interface temperatures and heat loss for composite walls, and analyzing two-dimensional steady state and transient heat conduction situations.
2. Explain the implicit and explicit methods 3. Explain laminar heat transfer coefficient for different velocities. 4. Explain modes of mass transfer. 5. Explain 1D steady state heat conduction. 6. Air at 1 atm and 25oC,containing small quantities of iodine,flows with avelocity of 6.2 m/s inside a 35 mm dia tube. Calculate mass transfer coefficient for iodine.The thermophysical properties air are: v=15.5*10-6 m2/s; D=0.82*10-5 m. 7. The composite wall of a furnace is made up with 120mm of fire clay [k=0.25(1+0.0009t) W/moC] and 600 mm of red o o brick(k=0.8W/m C).the inside surface temperature is 1250 C and the outside air temperature is 40oC determine: The temperature at the layer interface, The heat loss for 1 m2 of furnace wall. 8. Explain Fluid flow concepts of contini\uity, momentum equatios and derivation of energy equation. 9. Applications of empirical relations to variation geometries for laminar and turbulent flow. 10. Explain 2D steady state and simple transient heat conduction.