Professional Documents
Culture Documents
Asdasd and Gas PDF
Asdasd and Gas PDF
November 2013
WWW.INTSOK.COM
Introduction
Norwegian based companies in the oil and gas sector normally greater than 300 meters. The platform is
have a well established reputation and a significant permanently moored by means of groups of tethers
market share as providers of services, equipment and (i.e. tension legs) at each of the structures corners.
systems to topsides and substructures for fixed and The tension leg design eliminates vertical motion of
floating production platforms and drilling rigs. the platform, allowing the platform to have dry X-mas
In this catalogue we present the cluster of INTSOK part- trees on deck, connected directly to the subsea wells
ners that provide products and services towards topsides by rigid risers. This allows a simpler well completion
in general, as well as for the various types of floating and easier access for well intervention.
support structures. This catalogue is relevant for:
Oil companies The SPAR platform is a deep-draft floating caisson,
Engineering and EPC Contractors which is a hollow cylindrical structure similar to a very
Major shipyards large buoy. The spar relies on a traditional spread
Rig/ship owners mooring system, to maintain its position. The SPAR
design is now being used for drilling and production.
TOPSIDES The distinguishing feature of a spar is its deep-draft
Generally topsides comprises of production systems, hull, which produces very favorable motion charac-
supporting systems and accommodation for personnel. Its teristics compared to other floating concepts. Low
content is derived from the services it delivers in exploit- motions and a protected centre-well also provide an
ing an oil and/or gas field. E.g. separate oil, gas and water, excellent configuration for deepwater operations.
deliver power and other utilities or house personnel.
THE FLOATING PRODUCTION, STORAGE AND
Its support structure; i.e. Jacket, GBS, SEMI, TLP, SPARs OFFLOADING UNIT.
or a floating (monohull) vessels, is designed to support The FPSO is the dominant type of FPU and constituted
the topsides in the marine environment and in some around 70% of the FPU market in 2010. The FPSO is a
cases provide storage of the produced liquids. In the floating vessel designed to receive hydrocarbons pro-
early years of offshore developments, jackets were nor- duced from nearby platforms or subsea templates, sepa-
mally used to support the topsides and in Norway the rate the oil and gas and water, and store the oil until it can
GBS (Gravity Based concrete Structure) was invented be offloaded onto a tanker. The FPSOs are particularly
and extensively used. However for water depths exceed- effective in remote or deepwater locations where subsea
ing 150-200 meters, floating solutions are superior to pipelines are not cost effective. In harsh environments
fixed installations. the risers are connected to the vessel, through a turret,
which allows the vessel to weather-wane. Alternatively,
FLOATING SUPPORT STRUCTURES in benign environments like West Africa the FPSO can be
Floating support structures have been deployed in a spread moored and risers connected to the vessel at the
number of specific offshore services to find, develop side. FPSOs have historically been constructed by con-
and produce oil & gas, examples are mobile drilling rigs, verting tanker vessels for oil production purposes, but in
service vessels and oil production platforms. While recent years there has been a shift towards purpose built
the FPSO has been the preferred floating production FPSOs designed for given field parameters.
solution in most of the world, other solutions have been
applied in the US GoM, particularly SEMIs , Tension Leg FPSOS FOR LIQUEFACTION OF NATURAL GAS.
Platforms (TLPs) and SPAR. These are called FLNG and there are currently several
FLNG projects in execution. To mention a few: Malaysia
THE SEMI-SUBMERSIBLE. has the PETRONAS Kanowit FLNG project and Australia
The SEMI is a specialized vessel with good stability has Shells Prelude FLNG project. Shell has entered
and sea keeping characteristics. It is commonly used into a frame agreement with the Technip/Samsung
in a number of specific offshore roles such as for off- consortium to develop up to 10 FLNG units over a 15 year
shore drilling rigs, oil production platforms and heavy period and now several FLNG units are planned for the
lift cranes. It can be dynamically positioned or spread Browse field.
moored. The semi-submersible obtains its buoyancy
from pontoons located below sea level. Structural The selection of the floating support structure depends
columns connect the pontoons and operating deck, on the following criteria:
which can be located high above the sea level and Dry or wet trees
waves due to the good stability of the concept. Storage requirement
Available pipeline infrastructure
Operator familiarity
THE TENSION-LEG PLATFORM. Field life
The TLP is a vertically moored floating structure Cost
used for oil & gas production in water depths Area/field development plan (hub, tie-backs etc)
2
Contents
FPU Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Jotun Performance Coatings . . . . . . . . . . . . . . . . . . . . . . . . 36
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 K. LUND OFFSHORE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Capability Matrix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 KONGSBERG MARITIME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Lloyds Register Consulting . . . . . . . . . . . . . . . . . . . . . . . . . 39
ABB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 LMG Marin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
AGILITY GROUP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 MARINE ALUMINIUM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
AIBEL AS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 MARINE CYBERNETICS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
AKER SOLUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 MULTI PHASE METERS (MPM) . . . . . . . . . . . . . . . . . . . . . . . 43
ALFSEN OG GUNDERSON AS . . . . . . . . . . . . . . . . . . . . . . . . 12 NLI SOLUTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
AUTRONICA FIRE & SECURITY . . . . . . . . . . . . . . . . . . . . . . . 13 NORSAFE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
AXESS AS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 NOVENCO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
CAMERON SENSE AS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 OneSubsea . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
CMA CONTIKI AS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 OGLAEND SYSTEM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
ComputIT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 PALFINGER DREGGEN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
DELTA-P . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 PETRELL AS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
DNV GL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 PETROLINK AS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
DRESSER-RAND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 PG Group Ing Per Gjerdrum AS . . . . . . . . . . . . . . . . . . . . .52
ENERGY PIPING AS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 PON POWER AS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53
EUREKA PUMPS AS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 ProSep Norway AS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
FMC TECHNOLOGIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Rapp Bomek . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Force Technology Norway as . . . . . . . . . . . . . . . . . . . . . . . . 24 ROLLS ROYCE MARINE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
FRANK MOHN AS OIL & GAS . . . . . . . . . . . . . . . . . . . . . . . . . 25 ROXAR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Freudenberg Oil & Gas Technologies . . . . . . . . . . . . . . 26 SCANA INDUSTRIER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
GEXCON AS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 SEVAN MARINE ASA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Glamox Global Marine & Offshore . . . . . . . . . . . . . . . . . . 28 SHARECAT SOLUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
GMC HVAC AS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 SIEMENS OIL & GAS SOLUTIONS . . . . . . . . . . . . . . . . . . . . 61
HARDING SAFETY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Simtronics / Water Mist Engineering . . . . . . . . . . . . . . 62
HERNIS SCAN SYSTEMS AS . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Solberg Andersen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
IKM Laboratorium AS EI&P Division . . . . . . . . . . . . . . . . 32 TEAMTRADE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
IKM TESTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 THERMTECH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
IMENCO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Wilhelmsen Technical Solutions . . . . . . . . . . . . . . . . . . . . 66
INOCEAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 WRTSIL OIL & GAS SYSTEMS . . . . . . . . . . . . . . . . . . . . .67
3
Capability Matrix
Electric/ automation/
Marine engineering &
Topsides engineering
Rotating equipment
Technical & produc-
Administration & IT
Process equipment
Safety equipment
Other mechanical
Drilling systems
Cranes, lifting &
mooring design
tion services
equipment
moorings
services
telecom
ABB www.abb.no
Agility Group www.agilitygroup.no
Aibel www.aibel.com/en
Aker Solutions www.akersolutions.com
Alfsen og Gunderson www.ag.no
Autronica Fire & Security www.autronicafire.com
Axess www.axess.no
Cameron Sense www.c-a-m.com
CMA Contiki www.cmacontiki.no
Computit www.computit.no
Delta-P www.delta-p.no
DNV GL www.dnv.com
Dresser-Rand www.dresser-rand.com
Energy Piping www.energypiping.no
Eureka Pumps www.eureka.no
FMC Technologies www.fmctechnologies.com
FORCE-Technology www.forcetechnology.no
Frank Mohn AS Oil & Gas www.framo.no
Freudenberg Oil & Gas Technologies www.vectortg.com
Gexcon www.gexcon.com
Glamox www.glamox.com
GMC HVAC www.gmc.no
Harding Safety www.schat-harding.com
Hernis Scan Systems www.hernis.com
IKM Laboratorium (E.I&P Division) www.ikm.no
IKM Testing www.ikm.no
IMENCO www.imenco.no
Inocean www.inocean.no
Jotun Performance Coatings www.jotun.com
K. Lund Offshore www.kl-offshore.no
Kongsberg Maritime www.kongsberg.com
Lloyds Register Consulting www.lr.org
4
Engineering & Technical
Services Equipment & systems suppliers Drilling
Electric/ automation/
Marine engineering &
Topsides engineering
Rotating equipment
Technical & produc-
Administration & IT
Process equipment
Safety equipment
Other mechanical
Drilling systems
Cranes, lifting &
mooring design
tion services
equipment
moorings
services
telecom
LMG Marin www.lmgmarin.no
Marine Aluminium www.m-a.no
Marine Cybernetics www.marinecybernetics.com
Multi Phase Meters (MPM) www.mpm-no.com
NLI Solutions www.nli.no
Norsafe www.norsafe.no
Novenco www.novencogroup.com
OneSubsea www.onesubsea.com
Oglaend System www.oglaend-system.com
Palfinger Dreggen AS www.palfinger.com
Petrell www.petrell.no
Petrolink www.petrolink.no
PG Pump Solutions www.pg-marinegroup.com
Pon Power www.pon-cat.com
ProSep www.prosep.com
Rapp Bomek www.rappmarine.com
Rolls Royce Marine www.rolls-royce.com
Roxar an Emerson company www.roxar.com
Scana Industrier www.scana.no
Sevan Marine www.sevanmarine.com
Sharecat Solutions www.sharecat.com
Siemens www.siemens.no
Simtronics www.simtronics.eu
Solberg Andersen www.saas.no
Teamtrade www.teamtrade.no
Thermtech www.thermtech.no
Wilhelmsen Technical Solutions www.wilhelmsen.com
Wrtsil / Hamworthy www.wartsila.com
5
Contact person: Stein Guldbrandsy
Title: V.P: Global FPU Business Manager
ABB
E-mail address: stein.guldbrandsoy@no.abb.com
Company website: www.abb.com
ABB is a global leader in power and automation technologies that enable our customers to improve
their performances while lowering environmental impact.
Innovation through experience and proven ability to TURN-KEY EPC DELIVERY OF TOPSIDE MOD-
handle large projects in automation, telecommunication ULES INCLUDING:
and electrification including e-house distinguish ABB Flare Systems
as a highly competent supplier to the offshore industry. Water Injection
Combined with the traditional range of products, Fuel Gas
systems and solutions, ABB delivers turn-key plants and Process separation and PW treatment
modules to the Oil & Gas industry. Compression and Gas Treatment (TEG)
Close/Open Drain Systems
PRODUCTS Power Gen Modules
ABB combines innovative automation, electric, telecom- On-skid Fire & Gas and Safety systems
munication solutions and EPC know-how, for the off- Pipe-racks with integrated process piping and cable trays
shore Oil and Gas industry including fixed, floating and
subsea facilities. The Portfolio specific to market are: SERVICES
ABB can participate and contribute in all phases of
FULL ELECTRICAL-CONTROL-INSTRUMENT- a project from feasibility study to operation as Main
TELECOM (ECIT) INCLUDING: Instrument/Automation Contractor, Main Electrification
e-House modules Contractor, Main Telecommunication
Electrification
Power and Energy Management Contractor or as combination of the above. The actives
Power-from-shore (HVDC LIGHT) include:
AC/DC Drilling Drives Project Management
A complete range of AC electric propulsion and Studies
thruster systems Engineering Design
Azipod Propulsion Procurement
Integrated Operations Configuration/Integration
Remote Operations Start-up
Safety and Automation System Commissioning
Historian & Information Management Training
Instrumentation Full service
Asset Management WW After Market Services
REFERENCES
ABB has delivered to more than 60 FPSO and have references in the complete LNG value change
Year Name Owner Location
2013 Dana Western Isles FPSO Dana UK
2013 Heidrun FSU Statoil Norway
2013 Ichthsy Turret Inpex Australia
2013 Bouri-Gaza FSO MOG Libya
2013 Ichthsy FPSO Inpex Australia
2013 Ichthys CPF Inpex Australia
2013 Aasta Hansteen Statoil Norway
2012 Kikeh FPSO SMB Offshore Malaysia Malaysia
2012 Greater Stella FPU Petrofac UK
2012 Balnaves FPSO (FPSO Armada Claire) Bumi Armada/APACHE Australia
2011 ONGC D1 Bumi Armada/ONGC India
2011 OSX 3 Modec Brazil
2011 Knarr Teekay/BG Norway
2010 P-62 Quip/Petrobras Brazil
2010 P-58 Quip/Petrobras Brazil
2010 P-63 Quip/Petrobras Brazil
2010 Goliat ENI Norway
2010 Aseng SBM Equatorial Guinea
2010 Guara MODEC Brazil
2010 Tupi NE SBM Brazil
AGILITY GROUP
E-mail address: omo@agilitygroup.no
Company website: www.agilitygroup.no
REFERENCES
A selection only, please contact Agility Group for a full list of references.
Project Client Technology
Gina Krog FSO Teekay Shipping Norway Conversion
All units Dolphin Drilling Class and modification projects
GG5000, AG5000 COSL Basic design semi newbuilds
KMZ Topside BW Offshore Process Topside EPC
Clov DSME Minox Deoxygenation
Petroflame Seadrill, Odfjell Drilling, others Burner booms
AIBEL AS
E-mail address: oeyvind.vigeland@aibel.com
Company website: www.aibel.com
Aibel is a provider of products and services to the upstream oil and gas industry.
REFERENCES
A selection only, please contact Aibel for a full list of references.
Project Client Technology
Alvheim FPSO Marathon FPSO EPCIC
Volve FPU/MOPU Mrsk/Statoil MOPU EPCIC
Vincent FPSO Mrsk/Woodside FPSO EPC
Ettrick FPSO Bluewater/Nexen FPSO EPC
Golfinio II FPSO Saipem/Petrobras FPSO EPC
Cinguetti FPSO BWO / Woodside FPSO EPC
Troll C FPU Hydro FPU EPC
Visund FPU Hydro FPU EPC
AKER SOLUTIONS
contact person for a location, product or service.
Company website: www.akersolutions.com
Aker Solutions provides oilfield products, systems and services for customers in the oil and gas
industry world-wide. Our knowledge and technologies span from reservoir to production and
through the life of a field.
Aker Solutions brings together engineering and Our products and services are structured into nine
technologies for oil and gas drilling, field development different business areas, which together can offer all
and production. The company employs approximately technologies and services needed for the life of a field.
28 000 people in more than 30 countries, who apply the
knowledge and create and use technologies that deliver FRONT END SPECTRUM
our customers solutions. Aker Solutions spectrum of in-house capability is
unique in the oil and gas industry. It comprises our
BROAD PORTFOLIO AND EXPERIENCE extensive experience, throughout the entire life cycle
Our portfolio of oilfield products, systems and services, of a field, from the geological evaluation of prospects
stretches all the way from the reservoir to the well through project development, operations, modifica-
stream processing systems generating marketable and tions and maintenance to decommissioning. Now we
valuable hydrocarbon products. Our target is to deliver are utilising this by setting up a global organisation
the best. Each product, system and service competes covering the entire spectrum of competencies needed
on a standalone basis in the market. But, with our broad in early phase work. Front End Spectrum Feasibility
portfolio and experience, we understand the challenge and concept engineering by Aker Solutions.
and apply the knowledge to create optimal solutions. Front End Spectrum removes the traditional discipline
barriers and executes projects in integrated teams
Aker Solutions ASA is the parent company in the group, producing early phase studies with a holistic scope. All
which consists of a number of separate legal entities. with one overall goal: to increase the value of the field.
Aker Solutions is used as the common brand and trade-
mark for most of these entities. In 2012 Aker Solutions Front End Spectrum is a response to market demand.
had aggregated annual revenues of approximately NOK As the oil and gas industry is moving towards ever more
44, 9 billion. The company is listed on the Oslo Stock complex, challenging and marginal fields, the need for
Exchange. a holistic approach in early phase work is increasing.
During the last few years Aker Solutions has conducted
OUR VISION AND VALUES several studies following the Front End Spectrum
Our vision sets the overall goal for our business. Our methodology providing the customer with:
values and the importance we give them must be
reflected throughout our organisation and in every Consistent concepts from reservoir to facilities
aspect of how we do business, every day. Realistic field development schedule
Safer operations
Our vision is to be the preferred partner for solutions in Operational predictability
the oil and gas industry through living our values. Reliable cost estimates on all alternatives
All Aker Solutions employees share a common set As the market leader for the North Sea maintenance
of values the compass that guides our policies, our and modification markets, we have a unique insight into
operations and ultimately, our behaviour. the production phase of a field. As-built information and
performance data from production are continuously fed
OUR VALUES ARE into our databases, which form an important basis for
Customer drive further improvement of future development projects.
HSE mindset Through four decades, we have been supporting clients
People and teams with a better decision process in early phase work.
Open and direct dialogue
Hands-on management DRILLING TECHNOLOGIES
Delivering quality results Aker Solutions delivers drilling equipment, systems
and lifecycle services for application on onshore and
PRODUCTS AND SERVICES offshore drilling units. We have delivered complete
Each product, system and service competes on a drilling rig packages and individual high performance
standalone basis in the market. However, with our broad equipment to several hundred drilling units over
portfolio and experience, we understand the challenge many decades. We offer complete drilling equipment
and apply the knowledge to create optimal solutions. packages, including project management, engineering,
procurement and on-site commissioning.
AKER SOLUTIONS
contact person for a location, product or service.
Company website: www.akersolutions.com
We provide worldwide customer support through our Aker Solutions produces pressure vessels such as
global drilling lifecycle services organisation. Services sulphur absorber, vent wash columns, vent scrubbers,
include spare parts, technical support, overhaul/modifi- reactors for polystyrene, amine absorbers, test scrub-
cations and professional rig crew training. Our state-of- bers, demisting scrubbers and boilers.
the-art drilling equipment simulators are operating in
Norway, Singapore, South Korea, Houston and Brazil. TOPSIDES ENGINEERING
Aker Solutions has been designing, engineering, fabri-
MOORING AND LOADING SYSTEMS cating, completing and delivering platforms for more
Aker Solutions provides Pusnes deck machinery and than 40 years. We have been one of the major contribu-
mooring and loading systems for marine and offshore tors to the offshore technology development. During
applications. Close co-operation with classification this period we have designed and delivered close to 40
societies and maritime authorities, combined with production platforms, whereof 6 with topsides weight
innovative design, quality products and worldwide of more than 30 000 tons.
lifecycle services, ensure the high quality of the Pusnes
products. Our portfolio of products also includes steer- We have executed major projects world-wide, and have
ing gear and loading arms. developed oil and gas installations ranging from large
complex installations in the deep, hostile North Sea and
PROCESS SYSTEMS arctic climate, to facilities for small and marginal fields
Aker Solutions supplies process equipment for the in shallow waters. Our multi-discipline organisation
treatment of oil, gas, produced water and solids for covers all the technical and administrative functions
the upstream oil and gas industry, offshore as well as needed to execute engineering tasks for complex
onshore. topsides.
Our product range covers all relevant process stages. For detail engineering, Aker Solutions works out of
Products and services include crude and heavy oil Oslo, London, Mumbai and Kuala Lumpur to secure cost-
treatment, gas conditioning, hydrate inhibition (MEG effective project execution for our customers.
reclamation and regeneration), sulphate removal, VOC
recovery and sand management systems. FLOATERS
Aker Solutions designed and delivered the first floating
Lifecycle services and support for Aker Solutions drilling rigs in the late 1960s. Today we offer a full range
processing systems technologies include installations, of floaters, covering semisubmersible drilling- and pro-
service support, spare parts supply and studies/ duction rigs, Tension leg platforms, Spars and FPSOs.
performance evaluations. We assist in the development,
installation and operation of oil and gas fields onshore Semisubmersible drilling rigs
and offshore. Aker Solutions has been responsible for the design and
construction of a large number of the semi-submersible
Subsea processing facilities range from simple two drilling rigs delivered for worldwide operations. A total
phase separation, to three phase separation with of 39 units of Aker H-3, H-4 and H-6 design have been
oil boosting, re-injection of produced water, and built. 20 delivered from own yards, the remaining built
compression. by other yards on license. Recently, the success of the
Aker H-3/H-4 has been followed up with the Aker H-6e,
PRESSURE VESSELS likely the worlds most advanced semisubmersible
Aker Solutions delivers pressure vessels utilising a drilling rigs. They are specially designed to meet high
variety of steel from Midsund, on the west coast of environmental standards and can operate in ultra-deep
Norway. We supply all kind of pressure vessels up to waters, harsh environments, and extreme temperatures
a total weight of 600 tons in all the common types of and at long distances from supply infrastructure. The
materials. Products include separators, scrubbers, latest concept is the H-6x, tailored for harsh environ-
slug catchers, coalescers, degassers, KO drums, ment and mid-water operations (1500 meters water
hydrophores, dehydrators and many more. We have depth). The hull is identical to the well proven H-6e
comprehensive experience using high-tensile carbon design. Operational experience from the two H-6e units
steel (e.g. P500) and stainless qualities (e.g. duplex), and Transocean Spitsbergen and Transocean Barents and
performing internal cladding of complete vessels and new industry demands are embedded in the design. The
nozzles in-house (e.g. Inconel 625). H-6x features large deck areas, storage and pay load
capacities, and is prepared for full winterisation.
AKER SOLUTIONS
contact person for a location, product or service.
Company website: www.akersolutions.com
REFERENCES
Aker Solutions products and services, spans from reservoir to production and through the life of a field. Our global
organisation offers expertise and product lifecycle services in all regions. The list below shows only a few examples
of products and designs delivered for floating installations. For a more comprehensive list please contact us, or see
www.akersolutions.com.
GUNDERSON AS
E-mail address: gard.christensen@email
Company website: www.ag.no
Alfsen og Gunderson supplies a large scale of equipment for transport and treatment of water and
process fluids offshore. Our scope of supply includes Chemical injection systems, centrifugal pump
packages, high pressure pumps, filters, mixers and equipment for disinfection of water based on
dosing of chlorine or UV-radiation. The equipment can be supplied in many different materials
according to the customer requirements.
REFERENCES
A selection only. A complete reference list is available upon request.
Project Client Technology
FPSO:
Goliat Hyundai/ENI CIP, Mixing cabinet, Bilge pumps, Mixing/
tote tanks
Norne Aibel/Statoil Mixing cabinet, tank and pump systems
Kollsnes Aker Solutions/Statoil Pump package consisting of 40 pump
skid units
Platforms:
Gudrun Aibel/Statoil Potable water filtration and
UV-disinfection
Tambar Aker/BP Seawater Filtration
Statfjord B and C Aker/Statoil Potable water UV-disinfection
Autronica Fire and Security AS is a leading innovator, producer and international supplier of
advanced sensors and system for Fire & Gas Detection developed for the global petrochemical- oil
and gas industry.
Since Autronica was founded more than fifty years ago, self-testing and calibration every 24 hours. This
the company has paved the way for Fire & Gas System reduces the maintenance cost significantly.
development. Many of Autronicas new developments
have later become a global standard like the Analogue Autronica offers a full range of flame and gas detectors:
Addressable Fire Detection System, which was intro- High Sensitive Smoke Detection (HSSD)
duced to the market more than thirty years ago. Alarm displays
AutroMaster colour-graphic presentation
PRODUCTS Alarm management and control system
The product range includes:
AutroSafe fire detection SERVICES
AutroSafe IFG (Integrated Fire & Gas Detection) Service offered includes:
with SelfVerify; the words only IEC 61508 Safety System design
Integrity Level 2 (SIL 2) certified integrated Fire & Gas Project management
Detection System. Installation and commissioning supervision
AutroSafe IFG provides high-resolution diagnostic After sales service
and full diagnostic and full detection chamber Training
REFERENCES
Autronica Oil & Gas Division has a comprehensive global reference list. Sample of references are:
FPSO: Drilling Vessel: Semi Submersible: Refineries:
Petrobras P51 Transocean P5903 NORBE VI Estacao
Petrobras P52 Tanker Pacific H1809 Noble Dave Beard Tout Lui Raut Refinery
Petrobras P56 Saipem H1867 Sevan Driller Mongstad
Cascade Chinook Pride 1 H1786 Sedco 711 Ras Laffan
Espirito Santos Schahin H1870 Seadrill 13 Zuetina
AXESS AS
E-mail address: thomas.vekve@axess.no
Company website: www.axess.no
Axess is a high competence partner to our customers in achieving long term benefits, helping
them reach their goals of maximum production and zero harm. We deliver this through being
a leading provider of world-class integrity solutions. We assist in all phases from design to
decommissioning, all over the world.
Axess has long term contracts with international Specialist services in compliance with Norwegian and
companies from the rig-, oil/gas-, offshore- and energy Brazilian regulations
industries. Our head office is in Molde, and we are also
situated in Bergen, Trondheim, Kristiansund, Orkanger, Construction/mechanical completion, commissioning:
Houston, Rio de Janeiro, St Johns and Singapore. Axess Crane and lifting technology
has 300 employees. Material handling
QC services
In 2012 Axess performed work for more than 150 off- Specialist services in compliance with Norwegian and
shore units in all parts of the world. Brazilian regulations
SERVICES Operation:
Lifecycle phase: Crane and lifting technology
FEED/detailed engineering: Safe lifting operations
Crane and lifting technology Maintenance management
Material handling and layout Integrity management and inspection services
Maintenance engineering Specialist services in compliance with Norwegian and
Integrity engineering Brazilian regulations
REFERENCES
A selection only, please contact Axess AS for a full list of references.
FPU Client Technology (Services)
Peregrino BW Offshore Integrity management and inspection services
Specialist services in compliance with Brazilian regulations
Fluminence MODEC Crane and lifting technology
Cidade de Itajai Teekay Petrojarl Specialist services in compliance with Brazilian regulations
Norne Statoil Crane and lifting technology
Safe lifting operations
Integrity management and inspection services
Specialist services in compliance with Norwegian regulations
Hummingbird Spirit Teekay Petrojarl (Former Sevan Integrity management and inspection services
Marine)
Knarr Teekay Petrojarl Crane and lifting technology
Material handling and layout
Specialist services in compliance with Norwegian regulations
P-63 Papa Terra BW Offshore Specialist services in compliance with Brazilian regulations
Knock Allan Fred Olsen Production Integrity management and inspection services
Goliat Eni Crane and lifting technology
SENSE AS
E-mail address: Vibeke.haaverstad@c-a-m.com
Company website: www.c-a-m.com
REFERENCES
Drilling Packages
Client: PPL
Design: BMC-400
Owner: Oro Negro
Name: TBA
Scope of supply 6x Drilling packages;
- Top Drive Equipment
- Drawwork Equipment
- Mud Pumps
- Drillfloor tools Equipment
- BOP incl. BOP handling Equipment
- Integrated Control System Package
Year sold: 2013
Client: SWS
Design: JU 2000E
Owner: POD
Name: TBA
Scope of supply Complete drilling package;
- Derrick with Equipment
- Drilling Equipment
- Pipe Deck Equipment
- BOP incl. handling BOP equipment
- Mud Systems
- Integrated Control System Package
Year sold: 2013
Client: YZJ
Design: LeTourneau Super E116
Owner: Mena Drilling
Name: TBA
Scope of supply Complete drilling package;
- Drilling Equipment
- Drillfloor Equipment
- Pipehandling Equipment
- BOP
- Mud pumps
- Integrated Control System Package
Year sold: 2013
CMA CONTIKI AS
E-mail address: chj@cmacontiki.com
Company website: www.cmacontiki.com
Founded in 1989, CMA Contiki is a software company that specializes in Contract Management and
Sourcing solutions for oil and gas exploration companies and contractor industries. CONTIKI is
suited for both large multinational operators and contractors, but also small business units with
only a handful of contracting personnel.
ComputIT
E-mail address: trond.evanger@computit.no
Company website: www.computit.no
ComputIT is a specialist company working world wide with environmental and reactive flows. Our
focus is on CFD-based turbulent flow and combustion using our software KAMELEON FIREEX KFX
for both analysis and design.
of oil and gas platforms, FPSO/FLNGs, and onshore
Our aim is to improve safety in the petroleum industry, process plants:
to reduce negative impacts on the environment from Fire and smoke studies
oil and gas activity, and to contribute to cost savings Fire safety design
through use of advanced and accurate methods for LNG dispersion and fires
design. Structural fire response analysis and optimum design
of passive fire protection for facility integrity
PRODUCTS Analysis of active fire protection systems for fire
KAMELEON FIREEX KFX is probably the most mitigation by deluge, mist, monitors etc
advanced industrialized CFD software for fire, gas Combustion technology (burners/flare tips) for
dispersion and flare simulation and is gradually becom- optimum and environmentally friendly design
ing an industry standard. Many oil and gas companies, Aerodynamics and marine hydrodynamics
engineering companies, risk management companies,
as well as universities, are KFX users. KFX is com- REFERENCES
mercialized by ComputIT. Statoil, Total, Eni, ConocoPhillips, Gassco, BP, Aker
Solutions, MMI, DNV, Lloyds Register, Safetec/ABS,
SERVICES Lilleaker, GdF Suez, Aibel, KBR, ERM, Marex, Technip,
ComputIT offers consultancy services in the area of fire Genesis, Sinopec, Hyundai, Samsung ++
safety, combustion, environment and flares for all kinds
Delta-p AS is a Norwegian OEM supplier of all kinds of pumps and pump packages for the oil and
gas industry.
Our main features is to deliver customized rotating SW Booster and Water Injection Pumps
equipment fully tested according to customers Process pumps for all type of applications.
specifications.
SERVICES
PRODUCTS Aftermarket department that will support spare parts
Miscellaneous Pump Packages and service / overhaul of equipment
Crude oil and Condensate Pumps
Wellhead and Topside High pressure injection Pump Service technicians with offshore certificate and per-
Packages (MEG/Methanol) sonnel with OLF certificates. We can also offer support
High Pressure MUD Injection Pumps for installation activities on platforms.
Sampling Systems for oil export metering.
REFERENCES
Ekofisk LQ Conoco Phillips Hypochlorite injection skids w tank
in Titanium
Different Fields IRAQ, Statoil Crude Oil sampling
BWO Athena BWO Produced water booster pump
Gudrun Statoil Misc Pump package
Ekofisk 2/4Z Conoco Phillips HP MUD Injection pump and KO Flare
pump
Ekofisk 2/4L Conoco Phillips Utility pumps for LQ platform
Ormen Lange Shell Norge Condensate pumps
sgard A/Statfjord C Statoil Cooling medium skid (Titanium)
Troll A Statoil| Seawater Pumps
Edvard Grieg Lundin Misc pump package
Edvard Grieg Lundin SRU pumps
Alve/ Norne Statoil High Pressure MEG injection pump
package
Kollsnes Statoil MEG Export injection pump package
SMART 1 FPSO Hot Oil Circulation pump
SMART 1 FPSO Chemical injection skid
SMART 1 FPSO High pressure Methanol Injection
skid
Cidade Santos Petrobras FPSO SRU Pumps
Ghana FPSO SRU Pumps
Angola Total Angola Diaphragm pump skid
And other references list can be provided
DNV GL
E-mail address: Kenneth.vareide@dnv.com
Company website: www.dnv.no
DNV GL is an independent foundation with the purpose of safeguarding life, property, and the
environment. Our core competence is identifying, assessing, and advising on how to manage risk.
Whether we classify an FPSO, certify an automotive companys management system, or advise on
how to best maintain an aging oil platform, our focus is to safely and responsibly improve business
performance.
DRESSER-RAND
E-mail address: kgundersen@dresser-rand.com
Company website: www.dresser-rand.com
PIPING AS
E-mail address: sl@energypiping.no
Company website: www.energypiping.no
Energy Piping AS is one of the market leaders in the piping business in Norway. Our core market
is oil & gas and our stock of over 6000 finished products and materials provides a comprehensive
assortment of pipe, fittings and flanges.
Pipe support systems
Energy Piping AS has extensive experience in supplying GRE & GRP items
to international customers world-wide. Continuous Strainers
focus on customer satisfaction through knowledge, Filtration units
technical competence and a comprehensive stock is the Flame arresters
basis for our business. Flexible hoses
Hose assemblies and couplings
PRODUCTS 3D/5D Bends
Generics in stock: Hose reels
Pipe, fittings and flanges from 1/2-24 Flexible joints/Bellows
Mechanical joints Prefabricated spools
Compact flanges Manifolds
Special Items Non-standard flanges & fittings, and products
which require special engineering, testing and
Material qualities in stock: documentation.
22Cr Duplex (UNS S31803/S32205)
25Cr Duplex (UNS S32750/S32760) SERVICES
6Mo (UNS S31254/N08926) Energy Piping AS holds one of Northern Europes largest
316/316L Stainless steel stocks in ASTM piping products including pipe, fittings,
Titanium Gr. 2 flanges, compact flanges and mechanical joints. Our
Carbon steel stock range from 1/2 an up to 24 in all common material
ASTM A106 Gr.B/A234 WPB/A105 grades used for the oil & gas industry. We have semi-
ASTM A333 Gr.6/A420 WPL6/A350 LF2 finished compact flanges and mechanical joints which
ISO3183 L360(API 5L Gr. X52)/ASTM can be machined locally to customer specification for
A860 WPHY52/ minimum delivery time.
Selection of subsea products: Our technical department qualify steel mills of pipe,
Seamless pipe by hot extrusion fitting and flange manufacturers to Norsok M-650.
ID Pipe from forging The stock material are manufactured and certified to
Spool pieces Energy Piping AS own specification EP-3000 which
Barred Tees complies with Norsok M-630 and Statoil TR2000. Our
3D/5D Bends Technical Managers are members of, and participate
Fabricated Manifolds and HP Flow lines actively in the Norsok M-650 and M-630 committees.
Special Connectors and Flanges
Pig launchers and Receivers Energy Piping AS, with its considerable product
Clad pipe, fittings and flanges competence and experience also support customers
with calculations and finding the best technical and cost
Selection of special products/items: effective solutions for each application.
Techlok Clamp Connectors
REFERENCES
Edvard Grieg Kvrner Pipes, fittings & flanges 6MO &
Titanium
Quad 204 FPSO Hyunday Heavy Industries Super duplex welded pipes
Valemon Samsung H.I. Pipes & fittings, Duplex, Super
Duplex, 6MO & Titanium
Kristin LPP Aker Solutions 22Cr & 25Cr Duplex, 6MO, Super
Austinitt
Eldfisk 2/7S Kvrner All material grades
Ekofisk Zulu Platform Aker Solutions Titanium
Ekofisk Hotel Accomodation SMOE - Singapore All material grades
sgard A - Swivel Grenland Group Duplex
Gullfaks Water Injection Grenland Group Duplex
Mongstad DCR M/W Kellogg Carbon Steel material
EUREKA PUMPS AS
E-mail address: tom.gustavsen@eureka.no
Company website: www.eureka.no
Eureka Pumps AS is a pump supplier with more than 35 years of experience in the oil and gas
industry, offering a range of pumps and generator sets that covers a majority of applications.
Eureka Pumps supplies to new builds and operates advanced maintenance and after market. The
company also offers services for upgrading, modification, equipment testing, and installation.
TECHNOLOGIES
E-mail address: Flemming.sorensen@fmcti.com
Company website: www.fmctechnologies.com/measurementSolutions
FMC Technologies Measurement Solutions is the market leader in the design, manufacture and
supply of measurement products for the worldwide oil and gas industries.
Norway as
E-mail address: BZJ@FORCE.NO
Company website: www.force.no
FORCE Technology is among the leading technological consulting and service companies in
Scandinavia and internationally. We provides our technology and services globally.
Frank Mohn Flaty AS is the production facility for the oil & gas and environmental activities
within the Frank Mohn Group of companies.
Gas Technologies
E-mail address: Tony.Andre.Havelsrud@vectortg.com
Company website: www.vectortg.com
Freudenberg Oil & Gas Technologies (FO>) is a global solutions provider of innovative seal solu-
tions and differentiated seal products to the global oil and gas industry. The company is focused
on the exploration and production (upstream) segment, and acquired Vector Technology Group in
January 2013. Our 620 associates serve a wide range of customers including oil and gas producing
companies, original equipment manufacturers (OEMs) and engineering and service companies
that provide technologies, equipment and services for producing oil and gas from land based and
offshore platforms throughout the world.
The Vector products and sealing technology are used COMMITMENT TO CONTINUOUS IMPROVEMENT
in some of the most demanding applications in oil and Freudenberg Oil & Gas Technologies is committed
gas, including: offshore oil & gas platforms, FPSOs, to designing and manufacturing the safest and most
refineries, riser and swivel applications, flowlines and efficient sealing and pressure containment technology
subsea installations, and chemical and petrochemical in the market. Setting HSEQ as the highest priority
plants. Featured products are the SPO Compact Flange, throughout a project, core focus is on product quality
the TECHLOK Clamp Connector and the ROV-operated and development, the recruitment and retention of
OPTIMA Subsea Connector. Freudenberg Oil & Gas highly trained and competent personnel, continuous
Technologies has locations in Australia, Brazil, Canada, improvement and product installation support. In addi-
Malaysia, Norway, Singapore, the UK, the United Arab tion to its commitment to safety, reliability and techno-
Emirates, and the US. logical development, FO> continuously aims to excel
in order to meet or surpass its clients expectations.
A BROAD INDUSTRY KNOWLEDGE
Freudenberg Oil & Gas Technologies high level of PRODUCT SUPPORT
technical expertise, broad industry knowledge and Good quality products need proper support.
problem solving capabilities have earned industry wide Accordingly we offer the following services :
recognition, helping to build close working relationships Training courses including : Introduction, Handling &
with customers whilst delivering high quality products Protection, Assembly/Disassembly, Bolting and
and customised solutions on-time. Damage assessment
In-house capabilities include; raw material stock, Dimensional Inspection at customers locations or at
manufacturing facilities, coating, NDT and metrology FO> premises.
equipment, pressure and hydro testing as well as com- Leak Investigation: FO> can help by giving an
plete pressure, bending and torsion testing facilities. assessment of leaks, and solving the leak issues.
In combination with an efficient supply chain FO> is Damage assessment & repair management
able to deliver both flexible and fast track deliveries in Leak Reduction Initiative : Supervising during
addition to executing larger projects. Its products cover Fabrication, Construction and Commissioning with
pressure classes up to 15,000 psi and have a proven respect to leak reduction. Reducing leaks and creat-
track record within High Pressure / High Temperature ing significant time saving, due to the reduction of
and harsh environment applications where fatigue, high repairs and modifications.
bending and stress loads are of primary importance.
GEXCON AS
E-mail address: Erik.Aadland@gexcon.com
Company website: www.gexcon.com
GexCon AS is a world-leading company in the field of safety and risk management and advanced
dispersion, explosion and fire modelling. GexCons software FLACS has become an industry stan-
dard, and is now the world #1 explosion simulator.
Glamox Global Marine & Offshore (GMO) is the world leading suppliers of light and lighting solu-
tions to the global marine and offshore markets. The company is involved in large installation
projects, offshore maintenance and modifications.
PRODUCTS
Exterior lighting (topside & hull part) TECHNOLOGY
Explosion proof and safe zone Glamox has over recent years invested heavily in the
Floodlight and fluorescent type development of LED lighting. We see the small LED as a
Standard & Emergency light new light source that may change the world of lighting.
The LED technology is in rapid development and LED
Interior & accommodation has many applications. Because of the robustness of
Control rooms & technical rooms the diodes, LED is fast becoming the preferred light
Accommodation & Galley/Mess & Public source for demanding use on board ships, rigs and
rooms moving machinery. LED benefits among others;
Explosion proof and safe zone - Long Lifetime
- Energy savings
Designated areas - Maintenance friendly
Searchlights - Installation friendly
Navigation Lights - Efficient in cold temperatures
Helideck lights
Signal lights
GMC HVAC AS
E-mail address: jeo@gmc.no
Company website: www.gmc.no/gmc-hvac/category221.html
GMC HVAC has been a major HVAC supplier to the Norwegian Oil & Gas market since 1988. The
company is involved in large installation projects, offshore maintenance and modifications, and
the supply of ductwork and equipment.
GMC HVAC is currently employing a total of 87 skilled customer and the ability to deliver. Achilles registration
people with 16 experienced HVAC engineers, 60 techni- no. 950093617 Id. 15391
cians/ operators whereas 23 have offshore certificates
and experience. Our document control centre currently GMC HVAC delivers a full range of HVAC, Cooling and
engages 5 persons. Refrigeration equipment, and is an expert on bespoke
products for harsh environments, i.e. our own in-house
Our goal is to be the preferred supplier of HVAC ser- developed air conditioning systems, Simvent, delivered
vices for new and existing installations on the offshore to drilling rigs worldwide. We have our own Refrigerant
market. Department currently consisting of two engineers and
four technicians.
The culture of the company is characterized by
continual work for improvement, achieved through In our workshop, we have specialized in stainless steel,
coordination of expectations and requirements from and manufacture welded ductwork and plate construc-
customers, employees, authorities and owners. tions according to our customers specifications.
Our duct system, Simduct is manufactured in accor-
GMC HVAC is part of the GMC Group consisting of 9 dance to NORSOK - ISO15138, and can many times be
companies offering services and products to the oil an excellent alternative, saving both weight (approx..
and gas-, and shipping industry. The group are currently 70% ) and installation time (approx..35 %) compared to
employing approximately 275 persons. conventional, welded ductwork. Life Cycle Cost (LCC) is
zero compared to conventional duct systems.
When in need of a partner or supplier with the highest
level of experience in providing HVAC solutions to the GMC offers a full range of HVAC related services; our
oil and gas industry, GMC HVAC is an excellent choice. scope of delivery can include engineering, design, pro-
curement, equipment delivery and installation of new
Our Quality System is certified according to NS-EN ISO HVAC systems, or maintenance and troubleshooting,
9001:2008 manufacturing /supplying the following repairs and modifications on existing HVAC installa-
products/ services: Engineering and Design, Equipment tions, cooling and refrigeration plants.
delivery, Installation, Mechanical Completion, and
Commissioning of HVAC systems. An important aspect of our contracts is also to
take responsibility for Mechanical Completion,
Our HSE / Quality policy shall be carried out by having Commissioning and final Documentation.
focus on safety, quality and communication with
HARDING SAFETY
E-mail address: styrk@harding.no
Company website: www.harding.no
REFERENCES
A selection only, please contact Harding for a full list of references.
SYSTEMS AS
E-mail address: jankristensen@eaton.com
Company website: www.hernis.com
HERNIS Scan Systems AS is a world leader within high quality Closed Circuit Television (CCTV) sys-
tems for hazardous, corrosive and high-risk environments. We are geared towards tailored system
designs based on specific project demands. Our employees have extensive experience in project
development and are uniquely qualified to provide oil & gas industry engineering companies and
operators advice on CCTV systems. The systems are well documented and supported, and are sup-
plied to discerning customers operating in the coldest deserts of the arctic to the hottest deserts
around the equator.
OUR SERVICES
Engineering
Manufacturing
Testing
Installation supervision
Commissioning services
After sale services throughout the product life cycle
EI&P Division
E-mail address: Cato.Jansen@IKM.no
Company website: www.ikm.no
REFERENCES
Detailed reference list is available upon request.
We work with all the major oil and Gas Companies and
the major players within the marine Industry.
IKM TESTING
E-mail address: Jens.Bolme@IKM.no
Company website: www.ikm.com
IKM Testing, with 1050 employees, is a company within the IKM Group and is a global multi-
discipline supplier of subsea-, drilling-, mechanical completion- and commissioning services to the
oil & gas industry.
IKM Testing has its head office at Sola, Norway, and Decommissioning
international departments in UK, Canada, Spain, Brazil, LRA/NORM Handling
Poland, Kazakhstan, Australia, Singapore, Indonesia,
Thailand, Malaysia, Korea and Mexico. Subsea services
Pigging / Pipeline Services / RFO
SUBSEA / DRILLING / COMPLETION / Umbilical Services
COMMISSIONING SERVICES Subsea spools Services
Subsea template/manifolds services
Topside services
Nitrogen Services (N2/He Leak Testing) Drilling services
Chemical Cleaning Cuttings Transport System (CTS)
Oil Flushing / Oil Cleaning Mud Recovery Without Riser (MRR)
Video Inspection Nitrogen Well displacement
Bolt Working Services Scale Squeeze Inhibition pumping
Pressure and Vacuum Testing Acid Simulation Services
Hydro Jetting Conductor cutting
Preservation Machining
Air Treatment Slop Treatment (Offshore)
Flow Coding / Labeling Cuttings Handling skip and ship
Certification of Accumulators Tank Cleaning
Maintenance of Heat Exchangers SWARF
HVAC Cleaning
Dry ice cleaning REFERENCES
Pipe Freezing IKM Testing has extensive experience supplying services
Vacuum Tank cleaning to large scale projects including FPSOs, drill ships and
Cleaning of Slop Water (X-Clean) drilling rigs worldwide.
Cold Cutting
Flange Facing A complete reference list is available upon request.
IMENCO
E-mail address: geo@imenco.com
Company website: www.imenco.com
Imenco is a major sub-contractor to the maritime industry. We design, develop, and produce a wide
range of products within Lifting & Handling, Subsea cameras and tools, surveillance systems and
helicopter refueling units. 30 years of experience gives our customers added valuable and smart
solutions. Our engineering team is specialized in the area of mechanics, hydraulics and electronics
engineering. We provide services for some of the world leading oil and drilling companies. Imenco
is approved by Achilles and DNV, holding a Quality Management System Standard.
PRODUCTS SERVICES
Subsea Guiding Systems & Products Engineering and development
Special Subsea Tools
Lifting & Handling REFERENCES
Subsea Cameras, lights and laser Imenco delivers more than 20 high end helicopter refu-
Aviation Fuel Systems eling systems pr year and a varity of subsea products
Surveillance CCTV and systems.
Diving Systems
INOCEAN
E-mail address: te@inocean.no
Company website: www.inocean.no
Inocean is an independent internationally oriented naval architecture and marine design company,
established in 1996, with extensive experience within floating solutions for the maritime industry.
The key Inocean employees have more than 30 years of valuable experience within the offshore oil
& gas field.
Inocean business areas are: provide technology in terms of design of FSO, FPSO,
Floating Production FLNG and FPU. In addition to this, Inocean has devel-
Mobile Offshore Drilling oped and patented a LNG containment system and a
Special Vessels steel riser system, the L-riser, as well as various Mid
SURF and Renewables. Water Arch designs.
PRODUCTS SERVICES
Related to Floating Production & Storage, Inocean Management Consultancy, including site team.
REFERENCES
Inocean has taken part in more than 20 FPSO/FSO conversion/new-build projects and studies. Below is a list with a
selection of these. Please contact Inocean for a full list of references.
Coatings
E-mail address: frank.nordby@jotun.no
Company website: www.jotun.com
The Jotun Group is a leading supplier of paints and powder coatings. The Group has 71 companies
and 36 production facilities on all continents. Jotun is represented in more than 90 countries. We
supply paints and coatings that have been specially developed for unique conditions. The world of
Jotun is diverse, but we have one common agenda: Jotun Protects Property
OFFSHORE
E-mail address: rni@kl-offshore.no
Company website: www.kl-offshore.no
MARITIME
E-mail address: cato.franck@kongsberg.com
Company website: www.km.kongsberg.com
Kongsberg Maritime delivers the following products and Common and consistent user interfaces across system
systems to merchant vessels and offshore installations: borders save time, and increase operator accuracy.
dynamic positioning Shared base technologies make fewer spare parts
navigation necessary and system support simpler.
automation
propulsion control SERVICES
tank level instrumentation Support centers at strategic locations around the
machinery instrumentation world.
EIPC contracts Spare parts, service and technical suppport in a
lifecycle perspective
We also supply products and systems for: All work is carried out under supervision of an
seabed surveying account manager who works closely with you to opti-
surveillance mize system performance. Under his direction, using
training simulators local inventory of spare parts, our well-qualified field
fishing vessels engineers help you quickly and efficiently.
fisheries research
REFERENCES
For more information: www.km.kongsberg.com More than 4000 offshore vessels with Kongsberg
Maritime products and systems
PRODUCTS More than 16000 merchant vessels with Kongsberg
Our products are designed for performance and given Maritime products and systems
quality to last.
Consulting
E-mail address: jrh@lr.org
Company website: www.lr.org/consulting
Lloyds Register Consulting has more than 40 years of experience in assisting clients within
technical and organizational matters to increase safety and reliability and to reduce risks and envi-
ronmental impacts. The team consists of around 500 experts at 30 offices in 12 different countries.
The headquarters is in Kjeller, just outside Oslo, Norway.
Lloyds Register Consulting is part of the Lloyds RiskWatcher BOP, a risk modeling software tool for
Register Limited, a global company with more than online assessment of BOP reliability
250 years experience in helping our clients to ensure COSAC, a software tool for offshore concept safety
that their assets and processes are safe, responsible assessments
and sustainable. The consulting group includes former BLOWFAM, a software tool for estimating blowout
entities as Scandpower, ODS and Human Engineering. frequencies as input to risk assessment of drilling
Our main market sectors are Oil and gas (upstream and operations.
downstream), nuclear power, transportation, marine and
land based industry. SERVICES
Lloyds Register Consulting delivers services related to:
PRODUCTS Risk based management
Lloyds Register Consulting has developed a number of Risk assessments
software tools for supporting our services (see below). Technical safety and consequence modelling
Some of these are commercialized and are available for Reliability and asset performance
purchase. The most relevant for this market are: Human factors and work environment
RiskSpectrum PSA, a software tool for risk assess- Engineering dynamics
ments including fault trees and event trees
REFERENCES
A selection only, please contact Lloyds Register Consulting for a full list of references.
LMG Marin
E-mail address: glk@lmgmarin.no
Company website: www.lmgmarin.no
LMG Marin is an independent marine engineering company offer design and engineering of
offshore ships and floaters, providing complete package solutions for the vessels. LMG Marin
celebrated its 70th anniversary in 2013, and references covers more than 1000 ships and floaters
built at shipyards worldwide.
The company has main offices in Bergen, Norway, and LNG powered ships : LMG Marin has become a leader
branch engineering offices in Poland and France, in in the design and engineering of LNG powered
addition to representation offices in many countries. ships, currently with 18 units in operation or under
construction.
PRODUCTS
LMG Marin has long experience in providing innovative SERVICES
and reliable solutions for the upstream and downstream LMG Marin provides design and engineering services
industries, such as: with most types of floaters and ships, such as
Deepwater drillships: LMG pioneered the develop- All naval architectual disciplines
ment of the harsh environment drillships leading to Hydrodynamics
the delivery of the Navis Explorer 1. LMG Marin has Structural analysis
currently design and engineering responsibility for Systems engineering
the delivery of 14 drillships during 2015 2019 Mechanical
FPSOs and FPSO/D: LMG Marin provides design of Electrical and instrumentation
FPSOs and has developed a unique FPSO with drilling Integration of design disciplines
capabilities - the Sea Twin FPSO/D Fabrication preparation
Gravity based LNG terminals : LMG Marin has facili- Project Planning and management
tated the development of a gravity based LNG ter-
minal for shallow water installations, based on cost REFERENCES
effective fabrication at a shipyard and to be towed, Drillships Navis Explorer 1 (now Belford Dolphin), 14
and finally installed fully outitted at the seabed. drillships under construction. FPSO conversions, FPSO
Floating LNG and el.power systems: LMG Marin design, several LNG powered ferries
provides several solutions related to floaters for
offshore LNG processing and facilitate integration
into a complete LNG supply chain.
ALUMINIUM
E-mail address: arild@m-a.no
Company website: www.m-a.no
Marine Aluminium AS (MA) is one of the worlds leading companies within engineering, design and
fabrication of aluminium structures and products for the offshore and shipbuilding industry.
CYBERNETICS
E-mail address: kjf@marinecyb.com
Company website: www.marinecyb.com
Marine Cybernetics performs third party testing and verification of control system software to
secure safe and reliable operations of ships and offshore installations. Its test methods result in
significant savings for yards, ship owners, contractors and oil companies compared to traditional
testing of control systems. Marine Cybernetics utilize a simulator based test technology, known as
Inspired, Hardware-In-The Loop (HIL) testing to thoroughly test control system software.
Dedicated,
Reliable PRODUCTS Benefits of HIL testing include:
Marine Cybernetics offers HIL testing for the follow- Reduces risk for software problems and delays
ing systems: during commissioning and sea trials
Dynamic positioning systems Reduces the risk for NPT (Non-Productive-Time) due
Dynamic Capability Positioning Systems to malfunctioning software
Power management systems Drilling Control Systems are performed on replica
Steering, propulsion and thruster control systems hardware in a lab, therefor not interfering with the
Drilling control systems vessel building process or operation
Crane control systems Suitable for new-builds, retrofits and brownfield
Mission critical control systems upgrades
BOP control Systems Trouble-shooting of known control system issues on
Integrated automation systems the vessel
Managed pressure drilling Reduces risk for incidents and accidents due to
Dual gradient drilling software failures during operation
Emergency shutdown systems
Vessel management systems REFERENCES
Monitoring systems Stena Drilling
Bourbon
SERVICES Farstad
We achieve safer operations with fewer costly incidents Pacific Drilling
through the testing of control system software. By Noble Drilling
Recognizing HIL testing you contribute to Offshore Sevan
Safety. Odfjell
Maersk
METERS (MPM)
E-mail address: blp@mpm-no.com
Company website: www.mpm-no.com
MPM (Multi Phase Meters) is advancing multiphase and wetgas metering to new levels, to satisfy
our customers needs and requirements. MPM is headquartered in Stavanger, Norway, and is a
subsidiary of FMC Technologies.
MPM supplies HighPerformanceFlowmeters that field configuration procedure, without the need of
accurately measure multiphase and wetgas flow (oil, any subsea sampling. It has been designed and quali-
gas, water) at topside and subsea facilities. MPM sets fied for use at water depths of up to 3 500 m (10 000
its pride insupplying products thatprovide consistent feet), at operating pressures of up to 1 000 bar (15 k
high accuracy in real life applications. psi) and at operating temperatures of up to 250 C
(480 F).
MPM aims to serve customers in all relevant regions of
the world and with this in mind has located sales and SERVICES
service centers in Dubai (UAE), Houston (USA), Milan MPM recognizes the importance of dedication and long
(Italy) and Singapore.MPM subsea projects are man- term commitment towards our customers. The organi-
aged from Kongsberg, Norway. zation isfinely tuned towards performing high quality
worldwide service and support. The high emphasizes
MPMs patented technology platform as well as the we put on this is reflected in our excellent customer
MPM meter was developed and qualified in a close co- satisfaction score.
operation with 6 major oil companies. With the highest standards in all aspects of a commit-
ment and a hands-on attitude, the people at MPM find
PRODUCTS the greatest pleasure in exceeding our client expecta-
The MPM HighPerformanceFlowmeter is made to mea- tions on all levels.
sure the oil companies most valuable asset. MPM offers a range of services related to. Training of
It works, its accurate, its easy to use and its operators and field personnel
self-calibrating. Testing in MPMs full-scale flow loop
Topside: Topside MPM meters can be installed at Installation, commissioning and start-up assistance
onshore and offshore sites. They are ideal for alloca- Studies of metering applicability and design
tion metering, well testing and serve as important Operational Integrity services with In-Situ verification
tools to help increase oil and gas production. They can
be used instead of test separators, and be equipped
with all of the unique features offered by MPM, like REFERENCES
Dual Mode (combined wetgas and multi phase meter), MPM has successfully delivered meters to a large
water salinity measurement (automatic field configu- number of projects around the world, operated by BSP,
ration), Droplet Count and In-Situ verification. Chevron, ConocoPhillips, Dong, NI, Esso, PDO, Petro
Subsea: MPMs subsea meter encompasses all the Canada, Shell, Statoil, Total.
features of the topside meter. It has a uniquely simple
NLI SOLUTION
E-mail address: tor.martin.roed@nli.no
Company website: www.nli.no
NLI is a group of companies supplying engineering and fabrication services, technology products
and process solutions to the offshore oil and gas industry.
We undertake the complete responsibility from concept hoses. We customize the products to comply with our
development to manufactured product. customers specifications.
NLI TS-X Storage & Fuel Tank
Our mission is to make life easy for our customers. To Supplies of wide range of LNG Tank systems and acces-
fulfil this goal we focus on competence development, sory systems suitable as LNG fuel tanks, LNG bunkering
high quality, flexibility and punctuality. NLI has today tanks and LNG land tanks for longer storage.
approximately 650 highly qualified employees.
SERVICES
PRODUCTS Topside Engineering
DPA, Deep Penetrating Anchor Concept, FEED, Detail, Follow-on engineering
The joint venture company Deep Sea Anchors AS has Topside EPC packages
patented the anchoring system Deep Penetrating Utility and process modules with partners
Anchor, a cost effective and competitive solution. Maintenance and Modifications
DPS, Drying Process Solutions TM Multidiscipline Surveys and EPCI services
NLI Offshore & Marine Products is a global supplier of Technical Service Provider Topside Engineering
drying and cooling process solutions for the chemical Multidiscipline technicians, engineers, project
and mineral industry. managers
Reels, Turntables and Baskets Technical Service Provider - MC / Commissioning
NLI Offshore & Marine Products provide a wide range Multidiscipline technicians, engineers, project
of transportation and installation Reels, Turntables managers
and Baskets for umbilicals, cables and offshore loading
REFERENCES
A selection only, please contact NLI Solution for a full list of references.
NORSAFE
E-mail address: arild.hansen@norsafe.com
Company website: www.norsafe.no
NOVENCO
E-mail address: hj@novencogroup.com
Company website: www.novenco-group.com
Novenco AS is a global market leader with regard to the manufacture supply and installation of
complete Heating, Ventilation and Air Conditioning (HVAC) systems for the offshore industry.
Projects range from engineering and supply of equipment, to complete turn key packages involving
installation and commissioning. Novenco have a global network of partners and a worldwide refer-
ence list.
commissioning of HVAC systems
Mariner: (Statoil)
PRODUCTS HVAC Blanket order for new production platform.
Air handling units Edvard Grieg: (Aker Lundin)
Air handling containers Delivery of all HVAC equipment for new production
Axial flow and Centrifugal fans platform.
Cooling plant, including provisional stores CJ 70 Jack up: (KFELS Shipyard B-347 Maersk
Self contained cooling Units Drilling)
HVAC Control systems System Engineering, equipment delivery, installation
Louvres, Drop separators & filters and commissioning of HVAC- and cold system in accom-
Duct heating and cooling coils modation/hull and cantilever areas
All type of dampers FEED study for drillships to SETE/Petrobras (LMG
Cabin units / air devices design)
Sound attenuators CJ-46 jack-up (China Merchant Heavy Industry TS
Bottle bank for emergency air under shut down Drilling)
Air scrubber systems (Air cleaners) System Engineering, Equipment delivery and commis-
sioning for two LQ
sgaard Upgrade: (Aker Statoil)
SERVICES Delivery of HVAC equipment for new modules.
Design Troll A offshore upgrade: (Aibel Statoil)
Project Management Delivery of HVAC equipment for new modules.
Equipment delivery JU-2000E jack-up drilling rigs (Waigaoqiao shipyard
Commissioning Prospector Offshore Drilling)
After Sales System Engineering, Equipment delivery and commis-
sioning for two LQ
REFERENCES
Major Offshore Projects 2011-2013: 2011
Papa Terra (P-63): (BW Offshore)
2013 Delivery of HVAC equipment for FPSO conversion to BW
CJ 70 Jack up: (DSME Maersk Drilling) offshore. (Leased to Petrobras)
System Engineering and equipment delivery of HVAC CJ 70 Jack up: (KFELS Shipyard B-331 &332 Maersk
system Drilling)
DANA FPSO: (Cosco DANA Petroleum) System Engineering, equipment delivery, installation
System Engineering, equipment delivery and commis- and commissioning of HVAC- and cold system in accom-
sioning of HVAC systems modation/hull and cantilever areas
P-69 Electrical & laboratory module: (SeaOil/KFels DolWin - Wind mill offshore converter station with LQ
Petrobras) (Aibel/ABB Tennet)
Equipment Engineering & delivery. System Engineering and Equipment delivery for com-
P-66 Electrical & laboratory module: (SeaOil/KFels plete rig.
Petrobras) Sevan Driller No 4 (Cosco Sevan drilling)
Equipment Engineering & delivery. System Engineering and Equipment delivery for com-
plete rig including commissioning
2012 Sevan Driller No 3 (Cosco Sevan drilling)
P-74, P-75, P-76 & P-77 Living quarters: (Cosco/EEP System Engineering and Equipment delivery for com-
Petrobras) plete rig including commissioning
System Engineering, equipment delivery and commis- Temporary Refuge shelter for 50 men (Uniteam - Agip
sioning of HVAC systems Kazakhstan)
Ocean 500: (Cosco Cotemar) System Engineering and Equipment delivery for com-
System Engineering, equipment delivery and plete shelter
OneSubsea
E-mail address: Per.Skiftesvik@onesubsea.com
Company website: www.onsesubsea.com
This is a list of the most recent references, for the remainder please contact OneSubsea directly.
Commercial Deliveries FTS and Swivels for FPSO Accum. months in operation FPSO: TBU Swivels awarded for FPSO: TBU
Design & Operating Conditions
Max. test pres-
pressure (PSI)
Electric power
No. of hydrau-
Seal diameter
No. of Control
pressure test
rating / rings
Swivel Type/
FTS & Turret
Design pres-
temp Middle
lic functions
No. and size
temp Upper
of interface
sure/ temp
sure/ temp
Onesubsea
(Months in
Operator /
operation)
(PSI)/(0C)
(PSI)/(0C)
(PSI)/(0C)
pressure/
pressure/
(PSI)/(oC)
Extended
Delivery/
Hydraulic
Schedule
Project /
Client /
signals
Design
Design
piping
Lower
FPSO
(mm)
(PSI)
No.
OGX/Modec 43 OSX 3 248/90 - 5750/80 8586 NA 1600/1200 Spacer By others 25 5000 September
OSX3 FPSO 1220-2 + 820-4 (MVSR by 2012
6 toroidals other)
Teekay Petrojarl Production 42 BG Knarr 5000/110 - 7048/110 10442 NA 1600/1200 10x8 Spacer 178 26 10000 2014
AS 1220-2+820-4 1x6
Knarr FPSO 6 toroidals
Tullow Ghana Ltd. / Modec 41 Jubilee 2030/90 - 6090/80 7900 NA 1450/ 17 x 8 NA 110 30 5000- Aug. 2009
FPSO 1162-3 + 820-3 1200 10000 (in 10)
6 toroidals
BP / Modec 40 PSVM 690/80 4715/65 5425/65 8140 NA 2000/ 8 x 12 NA By others 30 4000- Jan.
FPSO 1600-2 + 1220-2 + 820-2 1600/ 3 x 10 10000 2010
6 toroidals 1200 2 x 8 (in 11)
PetroProd Generic 38 PetroProd 1 1) 4) 5000/100 - 5000/100 7500 NA 1000 5 x 10" Spacer 80 rings 24 paths 10000/ Oct.
FPSO 777-3 + 777-2 3 x 6" 5000 2008
FTS: ESD, IV, pedestal & 5 toroidals + 1 future space 2 x 8" (in 09)
piping
BHP Billiton Petr./ Modec 37 Pyrenees 3455/65 - 2000/65 5200 NA 1600/ 7 x 10" NA 198 rings 38 paths 10000/ Jan.
FPSO 1220-4 + 777-4 1000 3 x 6" + 5000 2009
8 torodials 12 opt fibres (in 10)
Reliance/ Aker Floating 36 Aker Smart 1 4) 5000/60 3045/50 6020/60 7500 NA 1600/ 9 x 8" NA 98 rings + 15 paths 10000/ Dec.
Production FPSO 1220-3 + 777-2 + 527-2 1000/ 2 x 6" 2 fibres 5000 2007
FTS: ESD, pig, pedestal, 7 toroidals 750 (Sept 08)
piping & trolley
AED Oil/ Sea Prod./ 34 Puffin 1) 4) 3625/75 - - 4560 NA 750 1 x 6" NA 20 rings 10 x 1/2" 10000/ Dec.
FPSO 527-2 1 x 2,5" 250V -20A 5 x 1" 5000/ 2006
FTS: ESD, pedestal, piping 2 toroidals + space for 2 4 x 3/4" 3750 (12)
& trolley future 1 x 1 1/2"
Woodside/Maersk 33 Vincent 4) 2175/65 - 3625/60 4350 NA 1450/ 6 x 10" 17 rings 279 rings 7 x 3/8" 10000/ Mar.
Contractors / 1162-4 + 777-4 1000 1 x 8" 250A 250-600V 10 x 5/8" 7500/ 2007
FPSO 8 toroidals 1 x 6" -7200V 2-6A 3 x 3/4" 5000 (Sept 08)
+ 9 fibre 14 x 1/2"
6 x 1"
BHP Billiton Petr./ 32 Stybarrow 3220/60 - 4400/60 6600 NA 1450/ 6 x 12" NA 98 rings 12 x 1" 10000/ Jan.
Modec 1162-3 + 777-4 1000 1 x 8" 300-600V 3x 1 1/2" 7500/ 2007
FPSO 7 toroidals 1 x 6" 6-500A 4x 3/4" 5000 (10)
2 x 4" + 10 opt 1x1/2"
fibres
Pemex/BWO 31 KMZ 4) 3000/90 - 3000/80 4500/60 NA 2000/ 6 x 16 NA 32rings 12 x 3500 June
FPSO 1600-2 +1162-3 1450 1 x 10 2 x 1 2006
Trolley, access/ torque 5 toroidals (15)
structure
SYSTEM
E-mail address: sar@oglsys.no
Company website: www.oglaend-system.com
DREGGEN
E-mail address: m.pettersen@palfinger.com
Company website: www.palfingermarine.com
PETRELL AS
E-mail address: ram@petrell.no
Company website: www.petrell.no
Petrell AS is a supplier of technical services and survivability analysis. VessFire complies fully with the
advanced simulation technology within multi-physic simulation approach set forth in API 521 (ISO 23251) on
simulation, process safety and technical safety. Petrells the use of Guidelines for the protection of pressurised
technology and competence within blowdown and fire systems exposed to fire (Scandpower, 2004).
integrity analysis of process systems are well recog- VessFire may be leased on short and long term basis.
nized. The company develops simulation systems based Ask for details.
on clients specifications and also engages in R&D.
The companys activities are based on its proprietary SERVICES
simulation technology Brilliant (www.brilliant-cfd.com). Petrell can participate and contribute in all phases of a
Petrells clients include oil and gas companies, engineer- project from concept studies to execution (design, veri-
ing companies, consultancies, authorities and suppliers. fication and trouble-shooting). Typical services include:
Blowdown and flare system design
PRODUCTS Blowdown analysis
VessFire (www.vessfire.com) a simulation system Fire integrity of vessels, piping, flanges, structures
based on Brilliant for analysis of thermo-mechanic Optimization of passive fire protection
responses of process equipment and piping exposed Smoke studies including ventilation
to dynamic and extreme temperatures. The system is Gas dispersion
very well suited for blow-down and depressurization Safety studies and risk assessments
analysis. It is widely used for fire integrity and fire
REFERENCES
A selection of recent references is included below. Please contact Petrell for a full list of references.
PETROLINK AS
E-mail address: rune.kvernberg@petrolink.no
Company website: www.petrolink.no
Petrolink supports operations of platforms, subsea Our diverse portfolio of services comprises of the
installations and floating production units offshore, following:
oil and gas terminals onshore, refineries and process Operations Assurance & Consultancy
plants including power plants and carbon capture Operations Documentation
facilities. In addition, we provide services concerned Operations Management & Execution
with concept selection, preparation for operations, Competence Assurance
operations support and emergency response. Operating Simulator Training
companies and asset owners in Norway and internation- Safety & Emergency Response Training
ally are our main clients. We have offices in Stavanger, Maintenance & Inspection Engineering
Bergen, Aberdeen, Doha and Kuala Lumpur. Process Technology
Process Safety & Risk Assessment
PRODUCTS Personnel Assistance
N/A Project Services
Integrated Operations
SERVICES E-learning
REFERENCES
A selection only, please contact Petrolink AS for a full list of references.
Gjerdrum AS
E-mail address: roy.norum@pergjerdrum.no
Company website: www.pergjerdrum.no
PON POWER AS
E-mail address: Vidar.rasmussen@pon.com
Company website: www.pon-cat.com
Pon Power is the authorized distributor of CAT and MaK engines and generator sets in Scandinavia
and the Netherlands. We offer complete systems throughout the product spectrum, ranging from
6,4 to 16.200 kW, which are mainly used as propulsion and auxiliary engines, primary power or
emergency power, for firefighting pumps and cranes in offshore installations.
All engines are designed and tested to fit your needs. the full power range of CAT and MaK products. Our
With our special engineered products like Genflex and installations are engineered to match all requirements
ATEX solutions, you can minimize vibrations and heat to which we visualize in our FAT testcell.
safely install CAT engines in Zone II areas.
Our products have been successfully installed in all
Pon Power is certified according to these standards for types of vessels and in various types of jack-up rigs,
the O&G industry: ISO 9001, ISO14001, OHSAS18001, FPSO, FDPSO, semi-sub platforms and semi-deepwater
MSA Platinum and Achilles - illustrating our focus rigs.
on quality, safety and environmental responsibility.
Our goal is not just to be certified but that quality, SERVICES
safetyand focus on environmental impact is a part We are renowned for our efficient 24-hour service and
of our daily operations in allaspects of the company rapid delivery of spare parts, wherever they are needed.
by having a common mindset focusing on continuous Our Caterpillar certified Service Technicians and
improvement. We are your reliable partner in high- original CAT spare parts will keep your business running.
quality power installations. Anytime. With our specialized program for planned
maintenance we offer you flexible service solutions
PRODUCTS with remote monitoring to plan and budget your service
Pon Power provides high quality solutions in the jobs years in advance.
offshore market following all relevant standards in
REFERENCES
We are upgrading and servicing CAT engines in offshore installations for the worlds largest O&G companies and our
Pon-developed Genflex solution is highly popular to minimize vibrations. See references below. This is a selection
only, please contact Pon Power for a full list of references.
ProSep Norway AS
E-mail address: gwee@prosep.com
Company website: www.prosep.com
ProSep is a provider of process solutions and process Sorbfloc environmentally friendly flocculation of
components for the treatment of produced water, sour hydrocarbon components in produced water
gas and crude oil. The company specializes in compact
in-line equipment for separation and mass transfer, SERVICES
targeting high performance, compact equipment. Process analysis for debottlenecking
Solvent characterization
PRODUCTS Performance testing/experimental design
ProScav/ ProCAP selective H2S removal
ProDry gas dehydration REFERENCES
ProSalt crude desalting CTour applied for the treatment of 70 % of the
ProMix enhanced demulsification of crude-water produced water volume in the North Sea
flow 40 ProScav units delivered world wide
CTour produced water treatment process 8 ProSalt/ProMix units delivered world wide
SorbSep gas flotation for produced water A total of 3 OTC Innovation Awards received since
treatment 2005 (ProScav, CTour, ProSalt)
Rapp Bomek
E-mail address: jostein.johansen@rappbomek.com
Company website: www.rappmarine.com
MARINE
E-mail address: yrjar.garshol@rolls-royce.com
Company website: www.rolls-royce.com
Rolls-Royce is a world leader in marine solutions, providing products, service and expertise to
more than 30 000 commercial and naval vessels in the offshore, merchant, naval and submarine
markets. In addition we have gas engines for power plants onshore.
The company has a broad customer base including Sub sea construction vessels
marine customers, navies, and energy customers in Multipurpose vessels
nearly 120 countries. Our global support network offers Mobile offshore units
a wide range of service support, including tailor made Coastguard vessels
service agreements.
SERVICES
PRODUCTS Rolls-Royce Marine AS, Ship Technology-Offshore.
Rolls-Royce products include a wide range of: Trusted to deliver excellence. We offer advanced know-
how founded on more than 35 years experiecn in marine
Ship design design, engineering and state of the art technology:
Winches Vessel design and system integration, tailor made
Thrusters based on the owners requirements and our 35 years
Diesel and gas engines of desing experience.
Gas turbines Single point of contact in Rolls-Royce covering both
Water jets design and Rolls-Royce equipment
Deck machinery In-house detail engineering, delivering full detail
Propellers water jets design packages for vessel construction
Marine control systems Site support
Procurement support
PRODUCT EXAMPLES UT-DESIGNTM: Through life-time, upgrade and rebuild support
Offshore supply vessels Spare-parts support and follow up
Well stimulation vessels
Standby and rescue vessels REFERENCES
IMR vessels DOF Subsea
Offshore icebreakers and ice class vessels Maersk
Anchor handling vessels
ROXAR
E-mail address: Anne-LisbetHatlem.Lindal@Emerson.com
Company website: www.roxar.com
Roxar Flow Measurement (RFM), a division of Emerson Process Management, is one of the worlds
leading suppliers of metering and monitoring instrumentation, providing operators with accurate
knowledge on how their reservoirs and wells are performing, and increased production control and
integrity. RFM is the industrial inventor of multiphase and wet gas meters.
RFM solutions include: turned into genuine business value and is a key input
Permanent Downhole Instrumentation, providing into operational decisions.
continuous reservoir surveillance to ensure that
every producing well is managed for maximum From measuring flow rates to temperature, pressure,
performance. Recent developments include the Roxar sand erosion, corrosion, and chemical injection, RFM
downhole Flow sensor system which can, for the first puts operators firmly in control of the production
time, generate multiphase measurements from either process, increasing oil & gas recovery and maximizing
single bore or multilateral well configurations; and reservoir performance.
the Roxar downhole Wireless PT sensor system which
can measure previously inaccessible pressure and SERVICES
temperature information behind the casing in subsea Roxar is a world class provider of customer services.
wells. From installation through to a fields decommissioning,
Topside and Subsea Monitoring and Measurement we believe in helping you get maximum value from the
Solutions, including its industry leading Roxar multi- technology solutions we deliver. Our service offering
phase and wet gas meters, which provide continuous includes:
information on flow rates, water measurement and
how wells are performing, with the result being higher Global on-site support
recovery factors. The third generation multiphase Remote technical support
meter is able to characterise flow dynamics with even Global Service Centre
greater accuracy. Training
An extensive flow assurance portfolio which includes Technical Service Agreements
measurement input, hydrate injection control, and Project Management
corrosion and sand erosion monitoring to protect
pipeline integrity and guarantee the continuous flow REFERENCES
of oil & gas from reservoir to refinery. Roxar Flow Measurement has a global reference list of
And RFMs data acquisition solutions including product and solutions delivered on projects worldwide
advanced data monitoring, visualization and analysis the last few years.
tools which ensure that all information generated is
INDUSTRIER
E-mail address: jhm@scana.no
Company website: www.scana.no
Sevan Marine ASA is listed on Oslo Brs (ticker SEVAN) for such complementary uses of the Sevan technology.
and has developed a cylinder shaped floater, suitable
for all offshore environments. The Companys primary The business model has traditionally been based on
focus is to create value for its shareholders by deliver- a build-own-operate scheme, whereby the Company
ing products and solutions to the offshore industry, takes the responsibility for the construction, ownership
utilizing its core competencies within the areas of and operation of the Sevan units. After a restructuring
design, engineering and project execution. The basis for process in 2011, main focus will be on license agree-
the products and solutions is the Sevan technology. ments and EPC projects as a project developer.
REFERENCES
Please refer to www.sevanmarine.com for details
SOLUTIONS
E-mail address: sturle@sharecat.com
Company website: www.sharecat.com
GAS SOLUTIONS
E-mail address: simonetta.brossa-hoel@siemens.com
Company website: www.siemens.com/oilgas
Mist Engineering
E-mail address: ssh@wme.no
Company website: www.wme.no
Water Mist Engineering aims to be the leading Nozzle and piping placement studies
Engineering & Production Company of Active Fire Preparation of piping and Instrument Diagrams
Fighting Equipments as well as Fire Prevention Preparation of data sheets
Systems, mainly focusing on the Oil & Gas, Maritime and Commissioning and After Sales services to our
Petrochemical industries. equipments
Studies, Calculations, Planning & Execution of the
PRODUCTS modifications and upgrades of the outdated systems
Active Fire Fighting Equipments
Deluge Valve Skids REFERENCES
Foam Systems Statoil (Ringhorne Platform)
Water Mist Systems Modec (FPSO)
Gas Systems GDF Suez, (Gja platform)
Dual agents Ezra Holding (FPSO)
Powder Systems DSME
Hydrants BOA ( Platform Supply Vessel)
Monitors Song Doc MV BV ( FPSO)
Samsung
Fire Prevention Systems Golar Spirit (FSRU)
Nitrogen Generators DOF (Platform Supply Vessel
Tanker Pacific (FPSO)
SERVICES BW Offshore, Cascade & Chinook, (FPSO) (EX-1859
Detail technical design of complete Active Fire Petrobras)
Fighting Systems as well as Fire Prevention Systems STX Europe (PlatformSupply Vessel )
according to all types of class societies and Hyundai
regulations. Odfjell Drilling, Deep Sea Stavanger, (Drilling Rig)
Hydraulic calculations by use of Pipe net software Exxon Mobil (Huldra platform)
Preparation of fire water demands reports Aker Smart (FPSO)
Solberg Andersen
E-mail address: kaare.sunnarvik@saas.no
Company website: www.saas.no
TEAMTRADE
E-mail address: helge@teamtrade.no
Company website: www.teamtrade.no
Teamtrade AS was founded in 1984 and has established itself over the last decades to become
Norways leading supplier of Instrumentation, Electro/Automation and Fluid Control products to
the Oil and Gas Industry.
Electro / Automation: Sub-sea power and communica- The company do provide world-wide services for :
tion units, SPCTU Test units, MCC and I/O units and PLS Inspection , maintenance ,overhaul , testing and project
Systems (among others). management (to name a few) .
Our Products also includes systems (as listed under Aker Solutions , Aibel , Reinersen , Fabricom , National
Services) and we have a comprehensive courses and Oilwell Varco , FMC.
training programs both at our modern training facilities
and out with our customers locations.
THERMTECH
E-mail address: rocco@thermtech.no
Company website: www.thermtech.no
Thermtech is the Norwegian company owner and supplier of the TCC technology.
The TCC is the patented thermal desorption technology designed for the treatment of oily waste.
The TCC separates the oily waste into its components. The total recovery of the Base Oil
secures the reduction to zero of the TOC in the solids.
Thermtech is the technology owner of the patented of the original components. At the end of the treatment,
TCC process used to treat the oily waste produced the oil can be re-used and the clean solids can be used in
during drilling, production and refinery activities. The different applications, land filled or discharged to sea.
TCC converts kinetic energy to thermal energy by With all the elements recovered to be re-used with their
creating friction in the waste. The most important chemical and physical characteristics unchanged, the
property of the TCC process is its ability to recover TCC process has completely eliminated the concept
every component of the waste, with the same qualities of waste.
PRODUCTS
The TCC can be delivered in a variety of configurations and treatment capacities. In addition specific customer
requirements may be included in the actual configuration. Capacities range from 1 to 6 metric tons, the TCC can be
electrically or diesel driven. The unit can be designed for an indoor installation or as a mobile unit.
SERVICES REFERENCES
Thermtech assist the customers in getting their As of December 2014, 56 TCC based units, designed
business up and running. Beside the equipment itself, and build by Thermtech and by its license holders, can
Thermtech offer assistance with the plant design, be found in operation across the globe, located on land,
training of customers operators and supervisors, platforms and rigs both onshore and offshore.
installation and commissioning, operational start up
assistance, remote and on site supervision of opera-
tions, maintenance and spare parts.
Technical Solutions
E-mail address: philip.bannerman@wilhelmsen.com
Company website: www.wilhelmsen.com
GAS SYSTEMS
E-mail address: tore.lunde@wartsila.com
Company website: www.wartsila.com
Wrtsil Corporation is a global leader in complete lifecycle power solutions for the marine and energy
markets. By emphasizing technological innovation and total efficiency, Wrtsil maximizes the environ-
mental and economic performance of the vessels and power plants of its customers. In 2012, Wrtsils net
sales totaled EUR 4.7 billion with approximately 18,900 employees. The company has operations in nearly
170 locations in 70 countries around the world. Wrtsil is listed on the NASDAQ OMX Helsinki, Finland.
Early February 2012 Hamworthy plc including Hamworthy Wrtsil Oil & Gas Systems has been developing its
Oil & Gas Systems, now renamed to Wrtsil Oil & gas technology for Floating LNG (FLNG) since 2005 and has
Systems, has become part of Wrtsil Corporation. gained a unique position in the FLNG market by having
Wrtsil Oil & Gas Systems is a leading designer, devel- extensively proven its liquefaction technology in offshore
oper and manufacturer of advanced fluid handling sys- environments. The current status for FLNG in Wrtsil Oil
tems for ships as well as for onshore and offshore oil & gas & Gas Systems can be summarized as follows:
facilities. This includes technologies for cargo handling on
LPG/LEG carriers and LPG FSO/FPSOs, VOC recovery for FLNG liquefaction processes based on nitrogen
crude oil tankers and terminals, onshore LNG production, expander technology proven from onshore and
shipboard LNG re-gasification and fuel systems, LNG boil- marine applications.
off gas reliquefaction, and liquefaction and processing of Achievable specific power consumption of the
associated and stranded gas (FLNG and Zero Flaring). Wrtsil nitrogen cycle liquefaction processes is
lower than 0.35 kWh/kg net LNG produced.
PRODUCTS The majority of current FLNG prospects in Wrtsil are
Wrtsil supplies products and systems to a variety of within the 0.5 to 2.0 MTPA net LNG production range.
projects including FPSOs, FSRUs and FLNGs, seismic
vessels, drill ships, semi-submersibles and jack-up rigs, SERVICES
production test ships, LPG FPSOs, shuttle tankers, inter- Wrtsil supports its customers throughout the lifecycle
vention vessels, pipe layers and crane vessels. Wrtsil of their installations by optimizing efficiency and perfor-
products and systems for the oil & gas industry include: mance. We offer expertise, proximity and responsiveness
Ballast Water Management for all customers regardless of their equipment make in
Deep well pumps the most environmentally sound way.
Direct Electric Heating
Engine room pumps REFERENCES
Electro and Automation The products and systems that make up Wrtsils
Exhaust gas cleaning portfolio for the oil & gas sector amount to hundreds
Fire water pumps of project references delivered over several decades.
Flare gas recovery Detailed reference lists for any products or systems are
Floating LNG liquefaction available upon request.
Fresh water generators
Hydrocarbon blanketing Wrtsil Oil & Gas Systems has more than 45 years
Hydrocarbon gas compressors of gas system delivery references of liquid gas cargo
Inert gas systems handling systems including:
LNG fuel systems
LNG liquefaction LPG reliquefaction plants for gas carriers: 192
LNG re liquefaction LPG Heaters and vaporizers for gas carriers: 311
LNG regasification LPG cooling plants for FPSO/FSO: 4
LPG cooling LNG heat exchangers for gas carriers: 18
LPG & ethylene re liquefaction LNG re liquefaction plants for gas carriers: 35
Nitrogen generators LNG re gasification plants for floating terminals: 8
Oil and water separation Turnkey onshore LNG production facilities: 4
Power plant solutions VOC recovery systems for shuttle tankers and FSO: 10
Pump room systems
Riser tensioning compressors Within FLNG Wrtsil Oil & Gas Systems has executed
Ship design & consultancy several pre-FEED contracts and been an integral part of
Thrusters and positioning system Approval in Principle by several classification societies.
VOC recovery
Wastewater treatment
Zero flaring systems