Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

Rolling Bearing Friction

Disclaimer: The information on this page has not been checked by an independent person. Use this information at your own risk.
ROYMECH

Etap Altnel Ayvalk


Etstur
Engineering Tribology
Tatil Etsturdan Sorulur! John Williams
Buy New 44.81
Click arrows to page adverts

Privacy Information

Home
Tribology_Index
Coefficient of Friction

Rolling Bearing Friction

More Details on rolling bearing friction are available on the links below

Rolling Bearing Friction

Rolling bearings are called anti-friction bearing. They have high loading capacity and exhibit very low rolling friction torques. The friction torques are
similar or lower than ideally designed plain bearing operating under conditions of thick film lubrication.Rolling bearing have low starting torques

The coefficient of friction in rolling bearings relates to the type of bearing, the speed of rotation, the load, the amount and viscosity of the lubrication, the
friction of the seals, etc etc.

The bearing friction torque M r = F . f . (d/2)

alternatively ..

The bearing friction torque M r = F . f m . (D m /2)

(friction values below marked with ***)

M r = Friction torque (Nmm)


F = Radial (or axial load) (N)
f = coefficient of friction of rolling bearing .
f m = coefficient of friction of rolling bearing based on mean diameter
d = Diameter of the bore of the bearing (Shaft diameter)(mm)
D = Outside diameter of the bearing (mm)
Dm = (d+D)/2 (mm)

These values relate to running bearings without seals and with optimimum lubrication..
The start-up friction values will be higher -up to twice the values quoted below..

Single row ball bearing (radial Load) ..f = 0,0015


Angular contact ball bearing (single row) ..f = 0,0020
Angular contact ball bearing (double row) ..f = 0,0024
Self aligning ball bearing (radial load) ..f = 0,0010
Cylindrical roller bearings with cage ..f = 0,0011
Cylindrical roller bearings full complement ..f = 0,0020
Thrust ball bearing (axial load) ..f = 0,0013
Spherical roller bearing (radial Load) ..f = 0,0018
Taper roller bearings ..f = 0,0018
Needle roller bearings-with cage ..f m = 0,003
Needle roller ball bearings-full Complement ..f m = 0,005
Combined needle roller bearings ..f m = 0,004
Axial Needle roller ball bearings ..f m = 0,0035
Axial Cylindrical roller bearings ..f m = 0,0035

The seal friction should also be included if seals are fitted. A reasonable average value for a first estimate would be 0.001.

More accurate values for bearing rolling friction are found in the suppliers technical literature..(see links below)

http://www.roymech.co.uk/Useful_Tables/Tribology/Bearing%20Friction.html[23.06.2014 11:48:27]
Rolling Bearing Friction

Links to Rolling Bearing Information

1. INA bearings..Rolling Bearing Ball Bearing


2. SKF..Ball Bearings
3. Timken/ Torrington/ Fafnir..Bearings
Bearing SKF
Bearing Fag

This Page is being developed


Home
Tribology_Index
Coefficient of Friction

Send Comments to Roy Beardmore

Last Updated 23/06/2010

http://www.roymech.co.uk/Useful_Tables/Tribology/Bearing%20Friction.html[23.06.2014 11:48:27]

You might also like