Professional Documents
Culture Documents
Profometer 5brochure
Profometer 5brochure
Papworths Construction Testing Equipment- Australias leading Concrete NDT Equipment Supplier
Methods Of Rebar Location Current Value is continuously
updated to show the distance
The display unit provides various ways of identifying
the location of the buried reinforcement. to the nearest bar. This reading
Flow bar is not stored until the minimum
Increasing movement of the flow bar on the display distance is obtained. This smallest
indicates increasing distance to the reinforcement. concrete cover measured remains
temporarily stored in the Memo frame. When the
Current value operator is sure the Memo field represents the
The display shows the current distance from the smallest value that will be obtained for the associated
concrete surface to the nearest reinforcement reinforcing bar the button is pressed and the statistical
Variotone evaluation is updated to include the Memo values.
As the probe is swept across the concrete surface a
sound is emmitted. The nearer the probe is to the Provista Software
bar, the higher the tone.
Beep tone
The beep tone sounds immediately when the probe
crosses the bar axis.
Signal value:
Unfactored measure of distance from probe
Scanlog has two means of displaying the reinforcement
location information. The Provista software provide a suite for downloading
data files and elegantly reporting results
About PCTE
PCTE have over 30years experience in the
measurement and testing of concrete. With experience
CyberScan Measure with Grid in research, consulting and construction they are able
Other Features to assist you in reviewing the issues and developing
solutions. PCTE can provide more than just the
Detect Insufficient Cover
equipment. They can provide leading technical support
When the pre-selected limit value is for your business.
set the universal probe can be swept
rapidly across the concrete surface Other Equipment
without observing the display. If the The full Proceq range of equipment is available for
cover is too low, an acoustic warning insitu non destructive concrete measurement
signal is given. Profometer Covermeter
Schmidt rebound hammers
Use With Closely Spaced Bars Ultrasonic testing
Accurately locate the axis of Electrical potentials
neighbouring bars and mark it on the Concrete resistivity
concrete surface. Measure the bar Permeability
spacing and enter the value in the Absorption
unit. The diameter measurement can then be made We also supply maturity measurement equipment,
and the result appears on the display. corrosion rate monitoring equipment, GPR, Impact
Measure with Stats Echo and many other advanced concrete NDTs
While the probe is being swept
over the concrete surface the
Papworths Construction Testing Equipment- Australias leading Concrete NDT Equipment Supplier