Professional Documents
Culture Documents
Chemrite Descaler A-28
Chemrite Descaler A-28
Product Data
Type Acidic
Form Brownish
1
Page 2 of 2
Application Details
Direction for use: Drain and flush the system, fill it with clean water. Make up a
5 10% solution. For faster action, the water should be
heated approx 60C and maintain at that temperature.
Circulate the solution. Strength should be maintained if
necessary by adding additional descaler. When scale is
removed, drains flush and then rinse with 0.25 0.1% caustic
soda solution.
Boilers:
Drain and flush boilers, partially fill boiler with fresh
water and heat upto 60C. Introduce Chemrite Descaler
A-28 by means of feed pump. Fill boiler to normal level
keep solution at 60C. circulate the solution. Provide
vent to eliminate gasses formed in descaling. If heavy
scale is encountered drain out used solution anf fill with
fresh solution, when descaling is complete, drain, flush
and fill with fresh water give a final rinse with 2 3
gm/L Soda Ash.
Expose steel:
For removal of rust / scale from expose reinforcement / steel
apply CHEMRITE DESCALER A-28 directly by brush or
spray on steel surface and leave it 5-10 minutes then clean
surface by cloth or pressurized water. For protect surface
permanently should apply 2 coats of anti rusting coating
(Chemrite Ferrogard 101)