Professional Documents
Culture Documents
Proximity Sensor Accessories: General Purpose Plastic Mounting Brackets
Proximity Sensor Accessories: General Purpose Plastic Mounting Brackets
Proximity Sensor Accessories: General Purpose Plastic Mounting Brackets
Y92E
Proximity Sensor Accessories to Mount,
Protect and Optimize Sensor Efficiency
General purpose plastic mounting brackets
Spring mount threaded cylindrical housings in anodized alu-
minum and stainless steel to reduce sensor damage due to
collisions
Spring mount blocks in anodized aluminum or stainless steel
Fast mount cylindrical tubes in nickel-plated brass and Te-
flon coated versions simplifies mounting and eliminates
sensor positioning
Teflon sensor caps and ceramic face discs protect sensor
face from heat and abrasion
Threaded metal block mounts
Flat and right angle brackets in CRS or stainless steel fixed
or adjustable versions
Weld jacket for cable and cordset protection
Note: Teflon is a registered trademark of the DuPont Corporation.
Mounting Brackets
Y92E-F3R5 Y92E-F5R4
Description Model
Mounting hardware including one pair of metal Fits M8 size sensors M8-MHWS
nuts and one washer Fits M12 size sensors M12-MHWS
Fits M18 size sensors M18-MHWS
Fits M30 size sensors M30-MHWS
Dimensions
Unit: mm (inch)
Ordering Information
Note: Shaded models are normally stocked. Un-shaded models re-
quire 2-3 weeks delivery.
Thread Model
M12 x 1 Y92E-SUMB-12
M18 x 1 Y92E-SUMB-18
M30 x 1.5 Y92E-SUMB-30
Build compliance into your sensor mounting brackets to eliminate sensor damage due to target and tooling collisions. Spring mount threaded hous-
ings offer over-travel protection, resistance to abrasion, quicker installation and spare parts reduction. Spring mount threaded housings are avail-
able in anodized aluminum construction or in stainless steel versions for M8, M12, M18 and M30 shielded or unshielded proximity sensors. Plastic
end caps are utilized to deflect targets approaching the sensor laterally and are included with the hardware.
Ordering Information
Note: Shaded models are normally stocked. Un-shaded models require 2-3 weeks delivery.
Shielded Unshielded
A B C D E F G H I J 0 Model
M8x1 M16 3.1 0.25 22.1 15.1 5.1 22.1 N/A N/A 9.04 Y92E-GS08
x1.5 (0.12) (0.01) (0.87) (0.59) (0.20) (0.87) 9.51 11 (0.35) Y92E-GS08N
(0.37) (0.43)
M12x1 M22 4.06 0.51 28.6 22.9 6.35 22.1 N/A N/A 10.4 Y92E-GS12
x1.5 (0.16) (0.02) (1.12) (0.90) (0.25) (0.87) 17.3 14.7 (0.41) Y92E-GS12N
(0.68) (0.58)
M18x1 M30 5.10 0.76 35.8 29.7 8.38 29.7 N/A N/A 12.4 Y92E-GS18
x1.5 (0.20) (0.03) (1.41) (1.17) (0.33) (1.17) 17.8 23.9 (0.49) Y92E-GS18N
(0.70) (0.94)
M30x1.5 M47 51.0 43.7 7.62 37.3 N/A N/A 14.5 Y92E-GS30
x1.5 (2.01) (1.72) (0.30) (1.47) 20.9 38.6 (0.57) Y92E-GS30N
(0.90) (1.52)
Ordering Information
Note: Shaded models are normally stocked. Un-shaded models require 2-3 weeks delivery.
Dimensions
Unit: mm (inch)
A B C D E F G H I J K L M O Model
M8x1 19.0 9.52 0.25 15.8 15.2 5.33 22.1 N/A N/A 18.4 25.4 3.58 8.89 Y92E-GSB08
(0.75) (0.37) (0.01) (0.62) (0.60) (0.21) (0.87) 9.51 11 (0.72) (1.00) (0.14) (0.35) Y92E-GSB08N
(0.37) (0.43)
M12x1 0.51 25.4 22.9 6.35 N/A N/A 24.8 38.1 5.16 10.4 Y92E-GSB12
(0.02) (1.00) (0.90) (0.25) 17.3 14.7 (0.98) (1.50) (0.20) (0.41) Y92E-GSB12N
(0.68) (0.58)
M18x1 25.4 12.7 0.76 31.7 29.7 8.38 29.7 N/A N/A 30.7 4.60 12.4 Y92E-GSB18
(1.00) (0.50) (0.03) (1.25) (1.17) (0.33) (1.17) 17.8 23.9 (1.21) (0.18) (0.47) Y92E-GSB18N
(0.70) (0.94)
M30 34.9 17.5 50.8 43.7 7.62 37.4 N/A N/A 51.5 63.5 6.73 14.5 Y92E-GSB30
x1.5 (1.38) (0.68) (2.00) (1.72) (0.30) (1.47) 22.9 38.6 (2.03) (2.50) (0.26) (0.57) Y92E-GSB30N
(0.90) (1.52)
Replacement beveled plastic end caps only are available for spring mount threaded and block style housings. Please determine the Prox. Barrel
size and if it is shielded or unshielded type. Shielded types are glass filled Nylon, unshielded types are Delrin.
Ordering Information
Note: Shaded models are normally stocked. Un-shaded models require 2-3 weeks delivery.
Dimensions
Unit: mm (inch)
Replacement Beveled Plastic Caps for Use with Spring Mount Housings
A B C D E F Model
M8x1 15.2 5.28 0.38 6.45 N/A Y92E-ES08
(.600) (.210) (.015) (.250)
14.5 5.08 9.50 Y92E-ES08M
(.570) (.200) (.370)
M12x1 24.4 6.35 0.76 11.4 N/A Y92E-ES12
(.960) (.250) (.030) (.450)
22.9 17.3 Y92E-ES12M
(.900) (.680)
M18x1 31.3 8.38 17.5 N/A Y92E-ES18
(1.23) (.330) (.730)
34.0 17.8 Y92E-ES18M
(1.34) (.700)
M30x1.5 43.7 7.62 1.02 29.2 N/A Y92E-ES30
(1.72) (.300) (.040) (1.15)
44.5 7.87 22.9 Y92E-ES30M
(1.75) (.310) (.900)
Install proximity sensors into the tube and simply twist to secure. Maintains sensing gap, reduces installation time. Standard versions are nickel-
plated brass, Teflon coated versions protect the sensor from the harshest environments. Teflon resin end caps for fast mount tubes are also
listed below. Dimensions differ from standard sensor caps for use on sensors not mounted in fast mount tubes. Caps are sold separately. Fast
Mount Tubes are not Spring Loaded.
Ordering Information
Note: Shaded models are normally stocked. Un-shaded models require 2-3 weeks delivery.
A B C D E F Model
8.18 32.4 17.5 M12x1 3.85 16.9 Y92E-G08S
(0.32) (1.28) (0.69) (0.15) (0.67)
48.0 34.0 Y92E-G08L
(1.93) (1.34)
12.1 33.7 19.5 M16x1 4.01 21.8 Y92E-G12S
(0.48) (1.34) (0.77) (0.16) (0.86)
44.8 30.0 Y92E-G12L
(1.76) (1.18)
18.1 38.5 20.0 M24x1.5 4.95 30.0 Y92E-G18S
(0.71) (1.52) (0.79) (0.19) (1.18)
58.0 40.0 Y92E-G18L
(2.28) (1.57)
30.1 35.0 20.0 M36x1.5 6.13 41.0 Y92E-G30S
(1.19) (1.50) (0.79) (0.24) (1.61)
58.0 40.0 Y92E-G30L
(2.28) (1.57)
Teflon Resin Sensor Caps for use with Sensors in Fast Mount Tubes
A B C D Model
14.7 8.89 0.89 Y92E-EG08-T
M12x1
(0.58) (0.35) (.035)
19.1 7.11 1.02 Y92E-EG12-T
M16x1
(.750) (0.28) (.040)
28.4 8.89 1.27 Y92E-EG18-T
M24x1.5
(1.12) (0.35) (.0)
41.1 1.78 Y92E-EG30-T
M36x1.5
(1.62) (.070)
Ordering Information
Note: Shaded models are normally stocked. Un-shaded models require 2-3 weeks delivery.
Dimensions
Unit: mm (inch)
A B C D Model
Sensor Caps Standard Versions in Teflon M12x1 14.7 8.90 0.89 Y92E-SC12
(0.58) (0.35) (.035)
or Ceramic 15.2 Y92E-SC12N
(0.60)
M18x1 24.1 8.90 1.14 Y92E-SC18
(0.95) (0.35) (.045)
17.8 Y92E-SC18N
(0.70)
M30x1.5 38.1 9.90 2.03 Y92E-SC30
(1.50) (0.39) (0.08)
25.4 Y92E-SC30N
(1.00)
Dimensions
Unit: mm (inch)
A B C D Model
M12x1 14mm dia. 5 0.5 Y92E-E12
12 Y92E-E12M
M18x1 21mm dia. 6 1 Y92E-E18
16 Y92E-E18M
M30x1.5 33mm dia. 8 1.5 Y92E-E30
21 Y92E-E30M
Ordering Information
Note: Shaded models are normally stocked. Un-shaded models require 2-3 weeks delivery.
Dimensions
Unit: mm (inch)
A B Model
M8, M12, M18 and M30 Proximity Sensors 5.80 0.3 Y92E-CF08
(0.23) (0.012)
10.4 Y92E-CF12
(0.41)
15.2 0.50 Y92E-CF18
(0.60) (.020)
27.9 Y92E-CF30
(1.10)
Dimensions
Unit: mm (inch)
Dimensions Model
A dia. B dia. C D
11.0 14.0 5.0 1.0 Y92E-E12-2
(0.43) (0.55) (0.20) (0.04)
17.0 21.0 6.0 3.0 Y92E-E18-2
(0.67) (0.83) (0.24) (0.12)
28.5 33.0 8.0 6.0 Y92E-E30-2
(1.12) (1.30) (0.32) (0.24)
Ordering Information
Note: Shaded models are normally stocked. Un-shaded models require 2-3 weeks delivery.
Dimensions
Unit: mm (inch)
A B C D E F G Model
M12x1 25.4 19.2 38.1 25.0 6.60 10-32 Y92E-B12MT
(1.00) (.758) (1.50) (.980) (.260) SHCS
M18x1 31.8 25.4 30.7 3.70 8-32 Y92E-B18MT
(1.25) (1.00) (1.21) (.145) SHCS
M30x1.5 50.8 33.1 63.5 51.6 5.97 1/4 Y92E-B30MT
(2.00) (1.30) (2.50) (2.03) (.235) SHCS
Fixed
Fixed
Adjustable
Adjustable
Ordering Information
Note: Shaded models are normally stocked. Un-shaded models require 2-3 weeks delivery.
Dimensions
Unit: mm (inch)
A B C D E F G Material Model
thickness
12.1 48.8 31.8 5.50 19.1 11.9 32.9 3.05 Y92E-B12FS
(.476) (1.92) (1.25) (.216) (.750) (.470) (1.30) (.120)
18.1 58.4 38.1 6.12 25.4 7.37 41.4 Y92E-B18FS
(.713) (2.30) (1.50) (.241) (1.00) (.290) (1.63)
30.1 87.1 50.8 9.93 31.8 9.53 61.4 Y92E-B30FS
(1.18) (3.43) (2.00) (.312) (1.25) (.375) (2.42)
A B C D E F G H I Material Model
thickness
8.10 54.3 31.7 5.60 15.9 7.14 19.0 38.7 46.2 1.78 Y92E-B08FRAS
(.319) (2.14) (1.25) (.220) (.625) (.281) (.749) (1.52) (1.82) (.070)
12.1 69.9 38.1 19.1 7.92 22.2 45.7 58.4 Y92E-B12FRAS
(.476) (2.75) (1.50) (.750) (.312) (.875) (1.80) (2.30)
18.1 82.6 44.5 25.4 50.8 66.7 Y92E-B18FRAS
(.713) (3.25) (1.75) (1.00) (2.00) (2.63)
30.1 105 57.2 7.24 34.8 10.3 30.9 49.0 61.2 2.16 Y92E-B30FRAS
(1.18) (4.11) (2.25) (.285) (1.37) (.406) (1.22) (1.93) (2.14) (.095)
A B C D E F G H Material Model
thickness
12.1 28.6 31.8 5.50 19.1 11.9 25.4 13.5 3.00 Y92E-B12AS
(.476) (1.13) (1.25) (.216) (.750) (.470) (1.00) (.530) (.118)
18.1 38.5 38.1 6.12 25.4 7.37 19.8 Y92E-B18AS
(.713) (1.52) (1.50) (.241) (1.00) (.290) (.781)
30.1 54.3 50.8 7.92 31.8 9.53 38.0 28.6 Y92E-B30AS
(1.18) (2.14) (2.00) (.312) (1.25) (.375) (1.50) (1.13)
A B C D E F G H I J K Material Model
thickness
8.1 25.4 31.8 5.54 15.9 7.14 19 31.8 9.83 7.62 7.95 1.78 Y92E-B08RAS
(.319) (1.00) (1.25) (.218) (.625) (.281) (.749) (1.25) (.387) (.300) (.313) (.070)
12.1 38.1 38.1 19.1 7.92 22.2 34.8 14.0 12.7 11.4 Y92E-B12RAS
(.476) (1.50) (1.50) (.750) (.312) (.875) (1.37) (.550) (.500) (.450)
18.1 50.8 44.5 25.4 19.1 15.9 15.9 Y92E-B18RAS
(.713) (2.00) (1.75) (1.00) (.750) (.625) (.625)
30.1 63.5 57.2 7.13 34.8 10.3 30.9 44.5 23.0 19.1 21.4 2.16 Y92E-B30RAS
(1.18) (2.50) (2.25) (.281) (1.37) (.406) (1.22) (1.75) (.907) (.750) (.843) (.095)
Ordering Information
Note: Shaded models are normally stocked. Un-shaded models require 2-3 weeks delivery.
Dimensions
Unit: mm (inch)
A B C D E F G Model
12.1 19.6 38.1 29.5 13.0 10.5 9.40 to 20.6 Y92E-SGM12
(0.48) (0.77) (1.50) (1.16) (0.51) (0.42) (0.37 to 0.81)
18.1 25.4 45.0 38.1 15.9 11.7 Y92E-SGM18
(0.71) (1.00) (1.77) (1.50) (0.63) (0.46)
30.1 36.8 69.9 67.8 31.8 19.1 25.4 to 44.5 Y92E-SGM30
(1.19) (1.45) (2.75) (2.69) (1.25) (0.75) (1.00 to 1.75)
34.1 Y92E-SGM34
(1.34)
Ordering Information
Note: Shaded models are normally stocked. Un-shaded models require 2-3 weeks delivery.
Note: Flange Mount Smooth Bore (SWFM) models are fabricated using UHMW polyethylene. The O-ring, with an OD of 88.0(3.46), produces the
seal and is supplied with Sensor Well.
A Dimension Model
30.1 (1.19) Y92E-SWFM30
34.1 (1.35) Y92E-SWFM34
Ordering Information
Note: Shaded models are normally stocked. Un-shaded models require 2-3 weeks delivery.
Model
Sensor Checker includes 2 9V Batteries Y92E-SC1
Ordering Information
Note: Shaded models are normally stocked. Un-shaded models require 2-3 weeks delivery.
Description: Woven fiberglass sleeving coated with a specially formulated and proprietary silicone rubber. Exhibits exceptional high-temperature
properties, flexibility, and toughness and abrasion resistance. Silicone rubber finish provides superior thermal protection, flame resistance and
makes it an ideal choice for welding applications requiring outstanding physical and insulation properties in high operating temperatures.
Thermal Endurance: -80C to +240C (-112F to +464F)
Chemical Endurance:
1. Oil and Solvent Resistance: passes MIL-l-3190/9
2. Water Vapor Resistance: passes MIL-l-3190/9
3. Excellent Resistance to Acids and Alkalis.
4. Resistance to mildew, aging and sunlight: unaffected by sunlight and weather.
5. Compatibility UL 1446 Good. Compatible with most varnishes.
Standards: Exceeds the requirements of UL 1441- table 19.8, NEMA TF-1- type 5 and ASTM-D372.