To produce keyways and slots using a milling machine, the document outlines a two-step procedure: first, an undersized end mill is used to cut a hole to the required depth in the workpiece; second, the table is given a reciprocating motion to produce the full slot by clearing one end, completing the keyway. Proper setup of the workpiece in the holding device, adjustment of the cutting tool, and final cleaning are also described.
To produce keyways and slots using a milling machine, the document outlines a two-step procedure: first, an undersized end mill is used to cut a hole to the required depth in the workpiece; second, the table is given a reciprocating motion to produce the full slot by clearing one end, completing the keyway. Proper setup of the workpiece in the holding device, adjustment of the cutting tool, and final cleaning are also described.
To produce keyways and slots using a milling machine, the document outlines a two-step procedure: first, an undersized end mill is used to cut a hole to the required depth in the workpiece; second, the table is given a reciprocating motion to produce the full slot by clearing one end, completing the keyway. Proper setup of the workpiece in the holding device, adjustment of the cutting tool, and final cleaning are also described.
Apparatus: Milling machine,work piece like shafts, cutting tool Procedure: Keyway slotting: Key slot milling in two steps. This operation requires some specific guidance, in addition to the general recommendations for milling of straight surfaces and grooving.
The best accuracy and productivity will
be achieved if the operation employs an undersized end mill, and is divided into two steps:
First of all hold the work piece in
holding device on the table. Now adjust the required tool in the machine and then first produce a hole in the work piece to required depth. Now give the reciprocating motion to the table produces a slot in the work piece. In the case of keyway it is required to clear one end. After all remove the burr and clean the machine and do some lubrication.