Professional Documents
Culture Documents
PDCCH Ordered Resynchronization
PDCCH Ordered Resynchronization
PDCCH Ordered Resynchronization
or DL
NOTE: The ENB only needs to send timing alignment commands to active UEs
that need to be kept in-sync
As a result, random access load will increase since RACH procedure will also be used
to re-sync the uplink
MSG1: UE selects one of the 64 available RACH preamble (or already knows what
preamble to use in CFRA case) and sends RA request w/ this preamble to ENB. If UE
does not receive any response from the network, it increases its power in fixed step
and sends RACH preamble again. This step is common in both CBRA and CFRA
Uplink Grant Resource: Network (ENB) will assign initial resource to UE so that it can
use UL-SCH (Uplink shared channel). This step is also common in both CBRA and
CFRA
MSG3: Using UL-SCH, UE sends "RRC connection request message" to ENB. UE
is identified by temporary C-RNTI (assigned in the previous step by eNodeB). This
step is common in both CBRA and CFRA