‘Mata Kuliah/Kelas : ELEMEN MESIN I!
Dosen : Ir. Dwi Basuki Wibowo, MS.
: Waktu: 100menit)
a Sifat Close Book’ 5
In the double-reduction spur gear train shown, shaft ais driven by a motor attached by a flexible coupling to
the overhang. The motor provides a torque of 2500 Ibf.in ‘at a speed of 1200 rpm. The gears have 20°
pressure angle, with pitch diameters shown on the figure (all dimensions in inches).
2 Generate shear and bending moment diagrams of the shafts
b. Ifthe modules ofall mating gears are 1.25 in, determine the number of all gears teeth
. Determine the output speed and torque
.
2. The figure show a pair of shaft-mounted helical gears having a diametral pitch of $ teeth/in with an 18-Looti,
normal pressure angle of 20°, and a helix angle of 30” pinion driving a 45-tooth gear. The horsepower input is
32 maximum at 1800 rpm. Find the direction and magnitude of the forces acting on bearings A, B, C, and D.
me
7 Soal No.2 207, p= 30° RH ‘Soal No.3