Professional Documents
Culture Documents
Working of Capacitor
Working of Capacitor
Working of Capacitor
Definition of Capacitor
Capacitor is a passive electronic component or device capable of storing charge with a certain
voltage level across two conducting plates or surfaces, separated by an insulating material or
dielectric substance.
Capacitor is constructed by using two conducting surfaces or plates and an insulating material
(i.e. Dielectric like mica, paper, air etc) between these two surfaces.
Working of Capacitor
As a capacitor is passive component, it does not generate energy. But it is able to store energy
from an energy source like a battery or another charged capacitor. When a battery (DC Source) is
connected across a capacitor, one surface, named plate I gets positive end of the battery and
another surface, named plate II gets negative end of the battery. When battery is connected, the
full voltage of that battery is applied across that capacitor. At that situation, plate I is in positive
potency with respect to the plate II.
Current from the battery tries to flow through this capacitor from its positive plate (plate I) to
negative plate (plate II) but cannot flow at max value due to separation of these plates with an
insulating material. Rather a very small current will flow through this insulating material
(dielectric) from Positive to Negative plate depending upon the value of strength of this
dielectric.
An electric field will form inside the capacitor dielectric from positive to negative plate. As time
goes on, positive plate (plate I) will accumulate positive charge from the battery and negative
plate (plate II) will accumulate negative charge from negative end of the battery. After a certain
time, the capacitor holds maximum amount of charge as per its capacitance with respect to this
voltage. This time span is called charging time of this capacitor.
Now, after
removing this battery from this capacitor, these two plates will hold positive and negative
charges with respect to a certain voltage level for long time. Thus this capacitor acts as energy
source. If
two ends (plate I and plate II) get shorted through a load, a current will flow through this load
from plate I to plate II up to all charges get vanished from both plates. This time span is known
as discharging time of the capacitor.
Suppose a capacitor is connected across a battery through a switch. When switch is ON, i.e. t =
0+, a certain value of current will flow through this capacitor. After a certain time (i.e. charging
time) capacitor never allow current to flow through it further. It is because of maximum number
of charges are accumulated on both surfaces and capacitor acts as a battery which has positive
end connected to the positive end of the battery and negative end connected to the negative end
of the battery with same potency. Due to zero potential difference between battery and capacitor,
no current will flow through it. So, it can be said that, initially a capacitor is short circuited and
finally open circuited when it gets connected across a battery.
Types of Capacitor
Polarized Capacitor
Polarized Capacitors are broadly Classified into following catagories.
Electrolytic Capacitor
Aluminum Electrolytic Capacitor
1. Non Solid
2. Hybrid Polymer
3. Solid Polymer
1. Non Solid
2. Solid MnO2
3. Solid Polymer
1. Solid MnO2
2. Solid Polymer
1. Class I
2. Class II
3. Class III
4. Class IV
Pseudo Capacitor
1. Class I
2. Class II
3. Class III
4. Class IV
2. Ceramic Capacitor
o Class I
o Class II
3. Film Capacitor
o Film/Foil (PP Film, PET Film, PEN Film, PPS Film, PTFE Film)