Professional Documents
Culture Documents
Yaesu FT 2900R Programming Guide
Yaesu FT 2900R Programming Guide
Noji Ratzlaff
Set the radio to communicate with a repeater at 147.080+ MHz, 77.0 Hz
Note: SET means to press and hold the MHz/SET button
0. Turn on the radio and make sure its unlocked 5. Select the transm it pow er level
1. Press D/M R once or tw ice until the display press LOW repeatedly
reads VFO
6. Set the squelch type
2. Set the frequency
SET - 49 - M Hz - TONE - M Hz - SET
1-4-7-0-8-0
or for repeaters that send a tone
3. If the + sign appears at the top, skip to step 5.
SET - 49 - M Hz - TSQL - M Hz - SET
4. Set auto repeater shift
7. Set the tone
SET - 4 M Hz - ON - M Hz - SET
SET - 52 - M Hz - 77.0 - M Hz - SET
Store and name the current repeater and tone settings in a memory channel
0. Follow the procedure above to set your radio 4. Set the channel nam e
for the frequency of your choice
SET - 30 - M Hz - dial - LOW - M Hz - SET
1. Press and hold M W
(Press REV for backspace)
2. Rotate the large dial to select the memory
channel to store the frequency The stored m em ory channel now has a name
0. Turn on the radio and make sure its unlocked 5. Set the squelch type
1. Press D/M R once or tw ice until the display SET - 49 - M Hz - OFF - M Hz - SET
reads VFO
6. Set the transm it pow er level
2. Set the frequency
press LOW repeatedly
1-4-6-7-4-0
Your radio is now set to transm it simplex