Professional Documents
Culture Documents
Lithonia Outdoor KL Series Low Level Flood Brochure 1-89
Lithonia Outdoor KL Series Low Level Flood Brochure 1-89
Lithonia Outdoor KL Series Low Level Flood Brochure 1-89
LITHONIA
ARCHITECTURAL OUTDOOR
Recessed lighting installed in planters, stairs, or retaininq
walls evokes a subtle effect around a project. It is an
opportunity for the lighting designer to create hig hlig hts and
nuances. Now Lithonia Architectural Outdoor inlroduces
the KL Low Mount Recessed Flood. the most innovative
approach available to site lighting. o
A.rea Distribution
A subdued. relaxing ambience is possible when lighting is
placed at low mounting heights. Lighting can be comfort-
able for pedestrians, but not harsh. ln the majority of appli
cations, the KLA is an integral part of a concrete planter box
or dividing wall. The multi faceted 'A reflector provides
general area illumination, excellent for an entry way, open
plaza or walkway. Optimum performance is achieved at 36"
to lamp center. for a broad oval of light with no hot spots or
dark streaks.
Directional Distribution
The side-throw capability of the KLD is unique in the
industry. Unlike other recessed wall mounted floodlights,
the KLD is easily adjusted for right or left beam throw. A
simple twist ol the positive-catch socket bracket places the
lamp in the proper position and a shield is rePositioned.
No tools are needed. In addition, various stairway lighting
angles can be set by raising or lowering the same soc
ket bracket into one of three predetermined positive steP
positions. Beam candlepower is thereby maximized to the
stairway plane.
KLD - One-piece hydroformed specular aluminum re-
D imen sion s - Height 12-1 / 4" flector, anodized finish. Unique (patent pending) bi adjust
Width: 14-1/4" able socket assembly which allows two modes of field
Depth: 8-3l16" (with lens) adjustment. Left or right direction throw can be field-ad-
Back Box Depth: 6" justed depending on fixture/stair position. Candlepower
Lens Depth: 2-3116" beam can be field-adjusted up or down to maximize lighting
distribution for stairway plane.
Housing:
Back Box One piece cast aluminum (alloy contains less Ballast/Electrical Sysfem High power factor ( 20'F start-
lhan 0.2% copper). lntegral thru-wire splice compartment ing), 100% copper wound and factory tested. Removable,
(46 cu. in.). (4) 3/4'NPT conduit entries. Hardboard cover unitized power module and positive locking disconnect
protects ioterior until finish components are installed. Clear plugs (primary and secondary). Porcelain socket.
polyester powder finish adds further corrosion protection. |4ounting Standard mounting is recessed concrete pour.
Lens One-piece injection-molded, U.V.stabilizedpolycar- Optional mountings available to accommodate stud wall
bonate,.125" min. thickness. Tooled-in, stippled texture on construction, pedestal mount, pole mount or wall mount.
non-optical portions. Die cut closed-cell EPDM gasket. Housinqs are shipped separately from ballast/lens/reflector
Stainless steel, captive Phillips-type fasteners with tamper- components.
resistant fasteners also furnished. Enamel finish on interior Finlsh-Dark bronze acrylic enamel standard. Black and
and exterior of non-optical portion. natural aluminum available.
Optics: Listing - U.L. 1572 and 1571 listed suitable for wet locations.
KLA One-piece hydroformed aluminum reflector; an Thru-wire listed for min.90"C. insulation.
odized finish, provides uniformly symmetrical area lighting. Opfiots Single Fuse, Double Fuse, Emergency Circuit,
Quartz Restrike System, Optional Mountings.
Accessory Drip Shield (prevents sediment from washing
over lens).
ORDERING INFORMATION
Catalog Number E Distribution
Directional Dist.
Hioh P.essure Sodium
t0 KL 5OS A KL 5OS D
7A KL 7OS A KL 7OS D
l0L) KL lOOS A KI I OOS D
70 KL 7OM A KL 7OM D
100 KL lOOM A KL lOOM D
r20
KL 5OH A KL 5OH D
70 KL 7OH A KL 7OH D
100 KL lOOH A KL ]OOH D