Professional Documents
Culture Documents
135kva Perkins Alternator
135kva Perkins Alternator
LSA 44.3
70 to 165 kVA - 50 Hz / 88 to 206 kVA - 60 Hz
Electrical and mechanical data
Low Voltage Alternators - 4 pole
LSA 44.3 - 70 to 165 kVA - 50 Hz / 88 to 206 kVA - 60 Hz
R250 R250 - - - - -
R438 - R438 R438 - -
R450 T Option Option Option - Included
D510 C Option Option Option Included Included
: possible mounting
Compact and design terminal box
Easy access to the AVR (lid) and to the connections.
Terminal block for reconnecting the voltage.
General characteristics
Insulation class H Excitation system SHUNT AREP or PMG
Winding pitch 2/3 (wdg 6) AVR type R250 R438
Number of wires 12 Voltage regulation (*) 0.5 % 0.5 %
Protection IP 23 Short-circuit current - 300% (3 IN): 10 s
Altitude 1000 m Total Harmonic distortion THD (**) in no-load ........ : < 2%
Overspeed 2250 min-1 Total Harmonic distortion THD (**) on linear load .. : < 5%
Air flow 0.25m3/s, 50 Hz - 0.30m3/s, 60 Hz Waveform: NEMA = TIF (**) < 50
(*) Steady state. (**) between phases.
* Values are rounded-off and are subject to change without notice by the manufacturer.
25 25
20 20
Voltage drop
Voltage drop
15 15
10 10
5 5
0 100 200 300 400 500 kVA 0 100 200 300 400 500 kVA
kVA at 0.8 P.F. kVA at 0.8 P.F.
30 30
Voltage rise
Voltage rise
20 20
10 10
0 100 200 300 400 500 kVA 0 100 200 300 400 500 kVA
kVA at 0.8 P.F. kVA at 0.8 P.F.
30 30
Voltage drop
Voltage drop
20 20
12%
10 10
0 100 200 300 400 500 kVA 0 100 200 300 400 500 600kVA
137.4
locked rotor kVA at 0.6 P.F. .locked rotor kVA at 0.6 P.F.
1) For a starting P.F. other than 0.6, the starting kVA must be multiplied by K = Sine P.F. / 0.8
Calculation example for a different P.F. other than 0.6: Starter motor kVA calculated at 0.4 P.F. = 120 kVA
Sin P.F. 0.4 = 0.9165 K = 1.145 kVA corrected = 137.4 kVA Voltage dip corresponding to L10-L12 = 12%.
2) For voltages other than 400V (Y), 230V (D) at 50 Hz, then kVA must be multiplied by (400/U)2 or (230/U)2.
94,1 94,3
95,1 95,2 95,1
95 93,7
95
94,1
92,3 90,9
91,7 93,1 93,5 93,1 92,9
90 91,9 91,9 90
90,9 90,1
87,4
85 86,4
85
0 20 40 60 80 100 120 kVA 0 20 40 60 80 100 120 140 160 180 200 220 kVA
LSA 44.3 S4 LSA 44.3 L10
100% 100%
25 25
20 20
Voltage drop
Voltage drop
15 15
10 10
5 5
0 100 200 300 400 500 600 kVA 0 100 200 300 400 500 600 kVA
kVA at 0.8 P.F. kVA at 0.8 P.F.
30 30
Voltage rise
Voltage rise
20 20
10 10
0 100 200 300 400 500 600 kVA 0 100 200 300 400 500 600 kVA
kVA at 0.8 P.F. kVA at 0.8 P.F.
30 30
Voltage drop
Voltage drop
20 20
12%
10 10
0 100 200 300 400 500 600 kVA 0 100 200 300 400 500 600 800 kVA
171,7
locked rotor kVA at 0.6 P.F. .locked rotor kVA at 0.6 P.F.
1) For a starting P.F. other than 0.6, the starting kVA must be multiplied by K = Sine P.F. / 0.8
Calculation example for a different P.F. other than 0.6: Starter motor kVA calculated at 0.4 P.F. = 150 kVA
Sin P.F. 0.4 = 0.9165 K = 1.145 kVA corrected = 171.7 kVA Voltage dip corresponding to L10-L12 = 12%.
2) For voltages other than 480V (Y), 277V (D), 240V (YY) at 60 Hz, then kVA must be multiplied by (480/U)2 or (277/U)2 or (240/U)2.
100
10
SHUNT
time (ms)
1 10 100 1000 10000
10000
LSA 44.3 S3
Symmetrical
1000
Asymmetrical
AREP
Current (A)
100
SHUNT
10
time (ms)
1 10 100 1000 10000
10000
100
SHUNT
10
time (ms)
1 10 100 1000 10000
10000
100
SHUNT
10
time (ms)
1 10 100 1000 10000
100
SHUNT
10
time (ms)
1 10 100 1000 10000
10000
100
SHUNT
10
time (ms)
1 10 100 1000 10000
10000
100
SHUNT
10
time (ms)
1 10 100 1000 10000
10000
100
SHUNT
10
time (ms)
1 10 100 1000 10000
266.5
648.6
N - 0.127
- 0.050
BX - 0.150
15
+0
235
P
444
+1
H -3
Access to
diodes X Y holes
equid. on U
Air inlet 6
150
72
75
40
70
Lr
Centre of gravity: Xr (mm), Rotor length: Lr (mm), Weight: M (kg), Moment of inertia: J (kgm2): (4J = MD2)
output
option.
+0
266.5
409.575 - 0.127
65 h6
648.6
11
+0
69
15
445
235
18
444
+1
H -3
M20
Access to diodes
Air inlet
20
295 474
6.5 C 50 95 50 50
Xr
Torsional analysis data
65
70
75
40
70
Lr
Centre of gravity: Xr (mm), Rotor length: Lr (mm), Weight: M (kg), Moment of inertia: J (kgm2): (4J = MD2)
Type Xr Lr M J
LSA 44.3 S2 309 793 117 0.825
LSA 44.3 S3 309 793 117 0.825
LSA 44.3 S4 329 793 135 0.988
LSA 44.3 S5 329 793 135 0.988
LSA 44.3 M6 353 863 149 1.096
LSA 44.3 M8 363 863 161 1.203
LSA 44.3 L10 383 903 176 1.346
LSA 44.3 L12 382 903 177 1.356
NOTE : Dimensions are for information only and may be subject to modifications. Contractual 2D drawings can be downloaded from the Leroy-
Somer site, 3D drawing files are available upon request.
The torsional analysis of the transmission is imperative. All values are available upon request.
Leroy-Somer 2017. The information contained in this brochure is for guidance only and does
not form part of any contract. The accuracy cannot be guaranteed as Leroy-Somer have an
ongoing process of development and reserve the right to change the specification of their
products without notice.
5028 en - 2017.03 / f