Professional Documents
Culture Documents
DELL 915 Power PDF
DELL 915 Power PDF
Power Plan:
PS_ID 0. RTC power plane.
1. Always power plane.
2. SUS power plane.
3. RUN power plane.
VCCRTC
U49
www.kythuatvitinh.com
Macallen 3 will output ALWON to MAX8734A to turn on +3VALW and +5VALW
U13,MAX8734A will have +3VALW and +5VALW power output on pin25 and pin 18
+3VALW
+5VALW 32 K Hz
Macallen
Digitally signed by fdsf When +3VALW is reach
DN: cn=fdsf, o=fsdfsd, Go! 3V,VCC1_PWROK is
ou=ffsdf, output high, this signal
email=fdfsd@fsdff, If Macallen is working. also reset Macallen3
c=US DBG2 pin2 will have internally.
Date: 2010.02.15 Q: If no debug out pulse? 1,2,3,4 pulse when AC
08:09:22 +07'00' 1. Macallen. adapter
2. BIOS ROM.
attached( DEBUG_OUT )
DB1 (Barbados) Power
Sequence
Insert AC adapter only, then
press power
button
POWER_SW#
SUS_ON
SUSPWROK_5V
Delay
10ms
+1.5VSUS +1.8VSUS
SUS_ON
U50 pin 8
SUSPWROK
DB1 (Barbados) Power
Sequence
SUSPWROK
PM_SLP_S3#
RUN_ON_D
www.kythuatvitinh.com
+5VSUS
+1.5VSUS
+5VSUS
+3VSUS
+1.5VSUS
+0.9VRUN
+5VA Q34 Q21 Q13 MAX8743 will produce
+1.05VRUN
Q48
4.75V for audio circuit.
+1.5VRUN
+1.5VRUN
+3VRUN
+5VRUN
+1.05VRUN
Delay
Make sure all RUN power 10ms
planes are in correct voltage
level.
+2.5VRUN_PG
+1.05VRUN_PWRGD
If these three signal
assert, then through
U50 ( AND gate ) will
produce RUNPWROK
U50 pin 6
RUNPWROK
DB1 (Barbados) Power
10ms after +3VRUN power Sequence
plane comes up
RUNPWROK
VCC_CORE
If no Vcore:
After VCC_CORE came 1. Check high/low side MOSFET.
out. ISL6217 will 2. Check .
produce
VGATE_PWRGD
All clocks
RESET_OUT#
Delay 10ms
www.kythuatvitinh.com XDP_DBRESET#
ICH6-M