Professional Documents
Culture Documents
FM8800D - S G Ime PDF
FM8800D - S G Ime PDF
VHF RADIOTELEPHONE
FM-8800D/8800S
www.furuno.co.jp
The paper used in this manual
is elemental chlorine free.
9-52 Ashihara-cho,
Nishinomiya, 662-8580, JAPAN
Telephone : +81-(0)798-65-2111
Fax : +81-(0)798-65-4200
WARNING CAUTION
Hazardous voltage. Attach securely protective
Can shock, burn or cause earth to the ship's body.
serious injury.
The protective earth
Do not work inside the equip- (grounding) is required to the
ment unless totally familiar AC/DC power supply unit to
with electrical circuits. prevent electrical shock.
Do not approach the antenna Confirm that the power supply voltage
closer than 0.9 m (MPE by is compatible with the voltage rating
FCC) when it is transmitting. of the equipment.
The antenna emits radio waves Connection to the wrong power supply
which can be harmful to the can cause fire or equipment damage.
human body. The voltage rating appears on the label
at the rear of the display unit.
RF power density Description
Distance
on antenna aperture required by Observe the compass safe distance to
100 W/m 2
0.11 m IEC 60945
prevent deviation of a magnetic
2 compass.
FM-8800S 10 W/m 0.33 m IEC 60945
2 W/m 2 0.9 m MPE by FCC
Standard Steering
100 W/m 2 0.11 m IEC 60945 compass compass
FM-8800D 10 W/m 2 0.33 m IEC 60945 FM-8800S 1.45 m 0.90 m
2 W/m 2 0.9 m MPE by FCC FM-8800D 1.45 m 0.95 m
(MPE: Minimum Permissible Exposure) IF-8810 0.85 m 0.55 m
IF-8820 0.75 m 0.50 m
Turn off the power at the mains switch-
board before beginning the installation. HS-2003 1.50 m 0.95 m
Post a warning sign near the switch- HS-8800 0.40 m 0.30 m
board to indicate that power should not RB-8800
1.20 m 0.80 m
be applied while the equipment is being (W/HS-8800)
installed. RB-8810
1.50 m 1.00 m
(W/HS-8800)
Electrical shock, serious injury or fire can PR-240 0.90 m 0.60 m
result if the power is not turned off or is
applied while the equipment is being RB-8810-W 1.55 m 1.00 m
(W/HS-8810-W)
installed.
i
TABLE OF CONTENTS
SYSTEM CONFIGURATION................................................................................ iii
ii
SYSTEM CONFIGURATION
VHF CH 70 RX
Antenna Antenna
VHF console
RC-8800 Wing handset MAX
2 sets
T/R AF output for VDR
IEC61162-1 input
Junction
DSC information output
Handset Box*
HS-2003 IF-8810 External alarm
Transceiver Unit
Remote station
RB-8800/8810 MAX
FM-8800D 4 sets
RB-8810-W
FM-8800S
DMC I/F RB-8800/8810
IF-8820 RB-8810-W
Printer
IF+UTP-80FK
Distress Message Controller
IF+UTP-58E
DMC-5
Printer
PP-510 Omit for Russian Version
PP-8800/A
24 VDC : Standard
: Optional
Category of units
Unit Category
Antenna Exposed to weather *: Option for FM-8800S/D-N
iii
EQUIPMENT LISTS
Standard Supply
Name Type Qty Code No. Remarks
FM-8800D-E-A
D: Duplex
FM-8800D-E-N
S: Simplex
FM-8800D-F-A
E: With handset
FM-8800D-F-N
HS-2003
FM-8800S-E-A
1 Transceiver Unit 1 F: With microphone
FM-8800S-E-N
DM-2003-F
FM-8800S-F-A
A: With IF-8810
FM-8800S-F-N
N: No IF-8810
FM-8800S-R-A R: Russian version
FM-8800S-R-N
For E-type
Handset HS-2003,
FP05-05700 000-054-228
Hanger FP05-05510,
2 Accessories* 1
Others FP05-05511
For F-type
FP05-05710 000-054-156
Microphone DM-2003-F
3 Junction Box IF-8810 1 For A-type
Installation Power cable 05S9371,
4 CP05-09900 1 000-054-227
Materials* CP05-09901
5 Spare Parts* SP05-05501 1 005-377-820
iv
EQUIPMENT LISTS
Optional Equipment
Name Type Code No. Remarks
Flush Mount Kit OP05-102 000-054-120
Junction Box IF-8810 W/ Screw 5x20 4 pcs.
DMC Interface IF-8820 No use for Russian version
RB-8800-15
FP05-05701*,
(W/ 1.5 m Cable)
Handset HS-8800,
RB-8800-20
Hanger W/DIST. button HG-8800
(W/ 2 m Cable)
Remote Station RB-8810-15
FP05-05511*,
(W/ 1.5 m Cable)
Handset HS-8800,
RB-8810-20
Hanger HG-8810
(W/ 2 m Cable)
RB-8810-W-15 W/ HS-8800-W-15
HS-8800-15 000-054-230 W/ 1.5 m Cable
HS-8800-20 000-054-171 W/ 2 m Cable
HS-8800-W-15 000-054-287 Waterproof
HS-2003-15 000-054-223 W/ Cable 1.5 m
Handset
HS-2003-20 000-054-390 W/ Cable 2.0 m
HS-2003-50S 000-054-391 W/ Straight cable 5.0 m
HS-6000FZ11 000-135-072
FP05-05700 000-010-246 HS-2003-15 & Hanger
HG-8800 000-054-229 For HS-8800
HG-8810 000-054-231 For HS-8800
Handset Hanger
FP05-05510 005-951-790 For HS-2003
AP-102 000-580-019 For HS-6000FZ11
Loudspeaker SEM-21Q 000-144-917
Handset HS-6000FZ5,
Dynamic Mic. Set OP05-57 000-045-775 Receptacle RDB-VHF(B),
Hanger AP-102
Handset HS-6000FZ6,
Carbon Mic. Set OP05-58 000-045-776 Receptacle RDB-VHF,
Hanger AP-102
Handset HS-6000FZ11,
Handset set OP05-42 000-045-778 Receptacle RDB-VHF(B),
Hanger AP-102
Mic. Receptacle Box RBD-VHF (B) 000-056-094
For transceiver unit only
Microphone DM-2003-F 005-377-760
(not RB-8800), **
Printer PP-510
Printer Interface IF-8500
AC-DC Power Supply PR-240
Whip antenna FAB-151D,
Mounting plate 4-310071,
AP05-00800 000-057-721
Coax. Cable 5D-2V 10m,
Connector M-P-5 2 PCS
Whip antenna RA106,
AP05-00810 000-057-722 Mounting plate RA115,
Antenna Material
Coax. Cable 05S9104 5m
Whip antenna 396-1,
AP05-00900 000-057-739
Mounting plate 4187
Whip antenna FAB-151D,
AP05-01000 000-054-123 Mounting plate 4-310071,
Connector M-P-7 2 PCS
*: See lists at the end of this manual
**: Microphone DM-2003-F can be connected to transceiver unit instead of handset HS-2003. However,
in this case, any remote station is disabled.
v
EQUIPMENT LISTS
vi
1. MOUNTING
Transceiver Unit
General mounting considerations
Determine the mounting location for the transceiver unit considering operator convenience,
proximity to the power source and the ground location. Keep these and the following points
in mind when selecting a mounting location.
Locate the unit in a place free of water spray and water splash.
Keep the unit out of direct sunlight because of heat that can build up inside the unit.
Leave a little slack in cables to allow a service technician to move the radio from its usual
location with the cables connected. This lets him make tuning and other adjustments on a
live set.
Do not install the unit where flammable gases are stored.
Select a well-ventilated area.
Ensure the mounting location is strong enough to support the weight of the unit (approx. 6
kg) under the condition of continued vibration normally encountered aboard the vessel. If
necessary, reinforce the mounting area with a doubling plate or lining block.
Leave sufficient space at the sides and rear of the unit for maintenance and service
purposes and to provide for circulation of cooling air. See outlines drawings at the back of
this manual.
For flush mounting, select a location where the LCD can be easily viewed.
The transceiver unit will affect a magnetic compass if placed too near the compass.
Observe the compass safe distance to prevent deviation of a magnetic compass,
referring to page i .
Note: Take great care not to press the DISTRESS switch during the installation. If you
accidentally press the switch, immediately turn off the equipment and contact
appropriate authority by telephone.
1-1
1. MOUNTING
*
Keep pressed for 4 s in case of DISTRESS.
The alert is transmitted with steady lighting. MSG 0 HI/L0 # ENT
*
MSG 0 HI/L0 # ENT
Overhead Tabletop
CANCEL INTL
7 USA 8 SCAN 9 DW MENU
ALM STOP PQRS TUV WXYZ
1-2
1. MOUNTING
265 251
110 ALARM
CANCEL
4 IntCom
7
GHI
INTL
USA
5 ACK
JKL
8 SCAN
6 PRINT
9 DW
MNO
FILE
MENU
ALM STOP PQRS TUV WXYZ
OFF AUTO
100
GHI JKL MNO
100
ALARM
CANCEL INTL
7 USA 8 SCAN 9 DW MENU
ALM STOP PQRS TUV WXYZ
OFF AUTO
1-3
1. MOUNTING
30 1
105 1
122 0.5
260 1
280 1
277 0.5
VHF Antenna
The antenna requirements
Any good quality antenna meeting the requirements shown below may be used. A high-gain
antenna is preferable.
Frequency range: 155 to 164 MHz
Impedance: 50 ohms
Polarization: Vertical
Handling power: 30 W/ min
Quality: Able to withstand marine environment
Mounting considerations
The antenna should be well separated from nearby antennas, masts, and other interfering
objects.
The higher the antenna is mounted above the horizon, the further the communications
range.
Mounting procedure
The basic mounting procedure for antennas supplied by FURUNO is as follows, however
consult appropriate outline drawing for details.
1-4
1. MOUNTING
CH70 RX Antenna
The antenna should be well separated from nearby antennas, masts, and other interfering
objects.
The mounting procedure is the same as that for the VHF antenna, however consult
appropriate outline drawing for details.
Handset Hanger
The handset hanger can be mounted at the left side of the transceiver unit. The mounting
location should provide easy access to front panel controls while operating the handset.
Also, the length of the standard handset cable is 50 cm, so locate the handset hanger within
50 cm of the unit. (Longer cables are available optionally.)
Mounting considerations
When selecting a mounting location, keep in mind the following points.
Select a location which provides adequate ventilation.
The location must be clean and dry.
The mounting location must be able to support the weight of the unit (14.5 kg) under the
continued conditions of vibration normally encountered aboard the vessel. If necessary,
reinforce the mounting location.
The PR-240 will affect a magnetic compass if it is placed to near the compass. Observe
the compass safe distance to prevent deviation of a magnetic compass, referring to page
i .
Mounting
Refer to outline drawing.
1-5
1. MOUNTING
Printer (option)
Printer PP-510
To mount the printer, refer to the printer outline drawing at the back of this manual.
Mounting Fixture
Mounting Fixture
1-6
1. MOUNTING
To install the remote box RB-8800/RB-8810, wing handset, etc., the junction box IF-8810 is
required. Install the junction box near the transceiver unit. Approx. 3 m cable is preattached
to the junction box to connect to the transceiver unit.
To connect Furunos distress message controller DMC-5, the DMC interface IF-8820
(option) is required.
1-7
1. MOUNTING
33
12
Handset hanger
63
Nameplate
HG-8800
40
140 0.5
DISTRESS
Cable entry
(Rear) VOLUME
4- 4.5
#150
Fixing holes
40 0.5 40 0.5
Cable entry
(Bottom)
57
65 Cable entry
12, Cable entry
42
22
(208)
Nameplate
145 0.5
208
#150
2- 4.5
Fixing hole
Hanger Hanger mounting base
1-8
1. MOUNTING
Note 1: Be sure to use a waterproof box to mount the RB-8810-W outdoors. The
waterproofing category of the RB-8810-W is IEC60529 IP56, however this should
be protected from the weather (IEC 60945).
Note 2: Before sealing with silicone sealant (for waterproofing), do the termination setting
(only for termination device, see page 2-7), connect cables and conduct the
performance test. After sealing, do not open the handset hanger.
1. Fix the mounting base with self-tapping screws. Coat exposed part of these screws with
silicone sealant.
2. Attach the cable from the transceiver unit or junction box. Coat cable around cable
entrance with silicone sealant.
3. Fix the cover of the handset hanger. Coat junction between mounting base and cover
with silicone sealant.
1-9
1. MOUNTING
VHF console
Install the rack console where the equipment can be easily operated, checked and serviced.
Consult with shipyard personnel and ship's officer-in-charge to determine best location. The
location must satisfy the following points:
Select a location where controls can be easily operated.
Select a location where shock and vibration are minimal.
Locate the console away from water splash and rain.
The temperature and humidity of the location should be both stable and moderate.
Fixing
1. Ask shipyard personnel to tighten six M5 nuts or six M5 bolts to the fixing holes (on the
wall), referring to the outline drawing at the back of this manual.
2. Detach the cover assembly from the console.
3. Hang VHF console on bolts.
4. Screw the console with the bolts or nuts tightly.
5. Attach the cover assembly to the console.
Note: When you connect wires as soon as attaching console, refer to paragragh 2-10.
EMG-1T
190
(371) EMERGENCY LAMP
(371)
75
330
40
170 0.5
HANDSET HANGER
(500)
480
170 0.5
30
145
40
(REAR)
250
FIXING HOLES
298 0.5 (266)
1-10
2. CONNECTIONS
Overview
The figure below shows where to connect various equipment at the rear of the transceiver
unit.
ANT
Connects antenna. Ground terminal.
24VDC
Connects power
cable.
Connect the radio battery to the DC IN terminal on the PR-240. Connect the AC ships
mains to the AC IN terminal on the PR-240.
2-1
2. CONNECTIONS
Lay the coaxial cable and attach an M-type plug to the cable (if necessary) as follows.
2-2
2. CONNECTIONS
Connection of Handset
Connect the handset cable to the HANDSET connector on the front panel.
Use one of these nuts for ground terminal between JB and ship's body.
Cable clamp: Clamp shield part of the cables to ground cables.
2-3
2. CONNECTIONS
Cable clamp
Cable
Attachment of connector
1. Dismount the cover of the transceiver unit by removing four screws at the rear panel and
two screws at the side.
2. Dismount the bottom cover by removing seven screws.
J15
CPU board
05P0773
3. Shorten between #1 and #2 of J15. The handset line of the HANDSET port becomes
always ON HOOK.
4. Assemble the unit.
2-4
2. CONNECTIONS
1 White 1 White
2 Black 2 Black
3 3
Punch mark
SEL
1 115 V
2
3 Heat sink
SEL
4 230 V
5
6
7
8
2-5
2. CONNECTIONS
Protective earth
Connect IV-2.0sq wire between ships superstructure and the ground terminal on the
PR-240.
CAUTION
Attach protective earth
securely to the ship's body.
GND terminal
2-6
2. CONNECTIONS
It is necessary, for termination, to change the jumper setting for remote station or DMC
interface.
Open the unit(s) terminated and change the jumper plugs J2 and J3 to ON position (#2-#3).
(Default setting is OFF position.)
Remote
DMC I/F Terminated Unit
Station
Note that up to four remote stations can be connected.
LINE RS-485
TERMINATION TERMINATION
J3 J2
1 3 1 3 J1
ON ON
Set to ON (#2-3)
DISTRESS
05P0782 for termination.
TB1
VOLUME
TB2
Cable entry
TB1
TB2
J3
3
ON OFF
TERMINATION
05P0798
LINE
1
TERMINATION
3
RS-485
ON OFF
Set to ON (#2-3)
for termination.
1 J2
J1
2- 4.5
Fixing hole
2-7
2. CONNECTIONS
05P0778
J4
ON
RS-485
TERMINATION
TB1
2-8
2. CONNECTIONS
Binding screw F
M4X10 8 places
Binding screw F
M4X10 4 places
Printer assembly
or Concealing lid
Console
Terminal board
2. Connect the power cable from the ship to the terminal block 1 (+) and 2 (-).
Terminal Board Wiring
1. Wiring conductor
910mm
2. Wiring
1)Insert a screwdriver which blade edge
is 3.5 X 0.5mm to the square hole.
2)Press the screwdriver to arrow direction
to open the spring in the round hole.
3)Insert the wire to the round hole.
4)Remove the screwdriver.
1 2 3 4 5 6 7 8
1 2
Power cable -
from the ship
Square hole
Round hole
Terminal board
3. Connect the ground wire from ship to each ground terminal for the transceiver unit and
the junction box.
4. Connect cables from external equipments to the junction box.
5. Fix the printer assembly (or concealing lid) and the cover assembly.
2-9
2. CONNECTIONS
2-10
3. ASSEMBLING CONSOLE KIT
A VHF console kit is required to mount the Transceiver Unit in the field. There are two types
as shown below.
Binding screw F
M4X10 8 places
Binding screw F
M4X10 4 places
Printer assembly
(or Concealing lid
Console
Panel assembly
3-1
2. Fix the panel assembly to the Transceiver Unit with binding screws (use original binding
screws of the Transceiver Unit). Refer to the figure below.
3. Screw in hex bolts M8x16 and flat washers loosely at both sides of the Transceiver Unit.
Panel assembly
Washer M8
2 places
4. Set the Transceiver Unit to the console, remove the grommets from the console and fix
the Transceiver Unit with hex bolts using the holes formerly occupied by the grommets.
Mounting
plate
Flat washer
Transceiver
Unit
5. Connect connector from the fuse to the power connector derived from the Transceiver
Unit.
3-2
6. Replace the cable attached to junction box with the cable (55 cm, 37-pin D sub) supplied
with the console kit.
Replace the original cable
A with the cable assembly
DSUB37M-PHX3-L550.
Junction box
(without cover)
2 3
Crimp-on lug
A View
7. Connect the cable (37-pin D sub) attached to the junction box to the Transceiver Unit
and then mount the junction box on the console.
Binding screw F
M4X8 4 places
Cover
Screw B
M4X104 places
Mounting plate
3-3
Junction box
Grommets 2 places
8. For the console w/printer, connect the printer cable for data transmission to the
PRINTER port of the Transceiver Unit and fix the power cable to the terminal board as
before. Then, fix the printer assembly to the console. For no printer, fasten the
concealing lid to the console.
Printer
W/ Printer
Printer cable
J2
View
NOTE: If the console assembly is to be mounted on the hull, refer to paragraghs 1-9 and
2-10.
3-4
FM-8800(S/D)-(J/E/F)-HS-N 05EC-X-9851 -6 1/1
NAME OUTLINE DESCRIPTION/CODE Q'TY NAME OUTLINE DESCRIPTION/CODE Q'TY
UNIT DOCUMENT
FM-8800S/D 1 OS*-56420-* 1
TRANSCEIVER UNIT OPERATOR'S GUIDE
000-054-225-00 ** 000-149-933-0* **
FP05-05511 1
ACCESSORIES
005-951-920-00
05S9371-2 1
CABLE ASSY.
000-151-711-12
CP05-09901 1
INSTALLATION MATERIALS
005-377-800-00
-[**]/
CODE NUMBER ENDING WITH "**" INDICATES THE CODE NUMBER OF REPRESENTATIVE MATERIAL.
/
A-1
DIMENSIONS IN DRAWING FOR REFERENCE ONLY. TWO TYPES AND CODES MAY BE LISTED FOR AN ITEM. THE LOWER PRODUCT MAY BE SHIPPED IN PLACE OF THE
UPPER PRODUCT. QUALITY IS THE SAME. 05EC-X-9851
FM-8800(S/D)-(J/E/F)-HS-A/(-HK) 05EC-X-9856 -5 1/1
NAME OUTLINE DESCRIPTION/CODE Q'TY NAME OUTLINE DESCRIPTION/CODE Q'TY
UNIT
05S9371-2 1
CABLE ASSY.
FM-8800S/D 1 000-151-711-12
TRANSCEIVER UNIT INSTALLATION MATERIALS
000-054-225-00 ** CP05-08701
IF-8810 1 CP05-08701 1
JUNCTION BOX INSTALLATION MATERIALS
000-054-219-00 005-949-280-00
SP05-05501 1 TIC-56420-* 1
SPARE PARTS DISTRESS PROCEDURE
005-377-820-00 000-149-935-0*
ACCESSORIES FP05-05700
OS*-56420-* 1
OPERATOR'S GUIDE
FP05-05511 1 000-149-933-0* **
ACCESSORIES
005-951-920-00 IM*-56420-* 1
INSTALLATION MANUAL
FP05-05510 1 000-149-931-0* **
BRACKET FOR HANDSET
005-951-790-00 OM*-56420-* 1
OPERATOR'S MANUAL
HS-2003-15 1 000-149-929-0* **
HANDSET (VHF/MF)
000-054-223-00 *52-00101-* 1
INSTALLATION MATERIALS CP05-09900 VHF/MF DISTRESS ALERT
FLOW 000-809-269-0* **
CP05-09901 1
INSTALLATION MATERIALS
005-377-800-00
-[**]
CODE NUMBER ENDING WITH "**" INDICATES THE CODE NUMBER OF REPRESENTATIVE MATERIAL.
A-2
DIMENSIONS IN DRAWING FOR REFERENCE ONLY. TWO TYPES AND CODES MAY BE LISTED FOR AN ITEM. THE LOWER PRODUCT MAY BE SHIPPED IN PLACE OF THE
UPPER PRODUCT. QUALITY IS THE SAME. 05EC-X-9856
FM-8800(S/D)-(J/E/F)-MIC-N 05EC-X-9858 -4 1/1
NAME OUTLINE DESCRIPTION/CODE Q'TY NAME OUTLINE DESCRIPTION/CODE Q'TY
UNIT
OS*-56420-* 1
DM-2003-F 1
MICROPHONE
005-377-760-00
INSTALLATION MATERIALS CP05-09900
CP05-09901 1
INSTALLATION MATERIALS
005-377-800-00
05S9371-2 1
CABLE ASSY.
000-151-711-12
DOCUMENT
(VHF/MF)
*52-00101-* 1
VHF/MF DISTRESS ALERT
FLOW 000-809-269-0*
TIC-56420-* 1
DISTRESS PROCEDURE
000-149-935-0*
-[**]
CODE NUMBER ENDING WITH "**" INDICATES THE CODE NUMBER OF REPRESENTATIVE MATERIAL.
A-3
DIMENSIONS IN DRAWING FOR REFERENCE ONLY. TWO TYPES AND CODES MAY BE LISTED FOR AN ITEM. THE LOWER PRODUCT MAY BE SHIPPED IN PLACE OF THE
UPPER PRODUCT. QUALITY IS THE SAME. 05EC-X-9858
FM-8800(S/D)-(J/E/F)-MIC-A 05EC-X-9859 -4 1/1
NAME OUTLINE DESCRIPTION/CODE Q'TY NAME OUTLINE DESCRIPTION/CODE Q'TY
UNIT DOCUMENT
(VHF/MF)
FM-8800S/D 1 *52-00101-* 1
TRANSCEIVER UNIT VHF/MF DISTRESS ALERT
000-054-225-00 ** FLOW 000-809-269-0*
IF-8810 1 TIC-56420-* 1
JUNCTION BOX DISTRESS PROCEDURE
000-054-219-00 000-149-935-0*
SPARE PARTS
OS*-56420-* 1
CP05-09901 1
INSTALLATION MATERIALS
005-377-800-00
05S9371-2 1
CABLE ASSY.
000-151-711-12
INSTALLATION MATERIALS
CP05-08701 1
INSTALLATION MATERIALS
005-949-280-00
-[**]
CODE NUMBER ENDING WITH "**" INDICATES THE CODE NUMBER OF REPRESENTATIVE MATERIAL.
/
A-4
DIMENSIONS IN DRAWING FOR REFERENCE ONLY. TWO TYPES AND CODES MAY BE LISTED FOR AN ITEM. THE LOWER PRODUCT MAY BE SHIPPED IN PLACE OF THE
UPPER PRODUCT. QUALITY IS THE SAME. 05EC-X-9859
A-5
'%:
A-6
&/(
0#/' 176.+0' &'5%4+26+10%1&' 3 6; %1&'01 '%:
6;2' %2
/+%412*10'5'6
<+4::%&/
*11-
+056#..#6+10/#6'4+#.5
-10
01 0#/' 176.+0' &'5%4+26+105 3 6; 4'/#4-5
/+%412*10'
.
Used only Japan
%#$.'#55;
%1&'01
:/ :/5
*175+0)%#5'
%1&'01
:/ :/#
%100'%614
%1&'01
:575
5'.(6#22+0)5%4'9
%1&'01
'%:
&+/'05+105+0&4#9+0)(144'('4'0%'10.;
&+/'05+105+0&4#9+0)(144'('4'0%'10.;
'%:
A-7 A-8
+056#..#6+10/#6'4+#.5 #%%'5514+'5
01 0#/' 176.+0' &'5%4+26+105 3 6; 4'/#4-5 01 0#/' 176.+0' &'5%4+26+105 3 6; 4'/#4-5
:575
:575
5'.(6#22+0)5%4'9 5'.(6#22+0)5%4'9
%1&'01 %1&'01
/
9#5*'4
%1&'01
&;: &<:
&+/'05+105+0&4#9+0)(144'('4'0%'10.; &+/'05+105+0&4#9+0)(144'('4'0%'10.;
A-9 A-10
#%%'5514+'5
01 0#/' 176.+0' &'5%4+26+105 3 6; 4'/#4-5
&9)01 37#06+6; 4'/#4-5%1&'01
/
+6'/ 0#/'1( 14 914-+0)
01 2#46 176.+0'
6;2'01 2'4 2'4 52#4'
9#5*'4
%1&'01 5'6 8'5
()$1#
:575 #%8
(75'
5'.(6#22+0)5%4'9
%1&'01
5'#.
%1&'01
'%:
-[**]
CODE NUMBER ENDING WITH "**" INDICATES THE CODE NUMBER OF REPRESENTATIVE MATERIAL.
05EC-X-9409
.
DIMENSIONS IN DRAWING FOR REFERENCE ONLY.
+056#..#6+10/#6'4+#.5
+056#..#6+10/#6'4+#.5 %2
01 0#/' 176.+0' &'5%4+26+105 3 6; 4'/#4-5
&57$/2*:. ,'
%#$.'#55;
%#$.'#55;
%1&'01
. 8%6(:%/
219'4%#$.'
(14&%/#+05
%#$.'#55;
%1&'01
&1%7/'06
%)
176.+0'&4#9+0)
,2'0
'%:
&+/'05+105+0&4#9+0)(144'('4'0%'10.;
'%:
FM-8800S-R-HS-N 05EC-X-9864 -1 1/1
NAME OUTLINE DESCRIPTION/CODE Q'TY NAME OUTLINE DESCRIPTION/CODE Q'TY
UNIT DOCUMENT
FM-8800S-R 1 TIC-56420-* 1
TRANSCEIVER UNIT DISTRESS PROCEDURE
000-054-404-00 000-149-935-0*
HS-2003-15 1
HANDSET
000-054-223-00
CP05-09901 1
INSTALLATION MATERIALS
005-377-800-00
05S9371-2 1
CABLE ASSY.
000-151-711-12
A-16
DIMENSIONS IN DRAWING FOR REFERENCE ONLY. TWO TYPES AND CODES MAY BE LISTED FOR AN ITEM. THE LOWER PRODUCT MAY BE SHIPPED IN PLACE OF THE
UPPER PRODUCT. QUALITY IS THE SAME. 05EC-X-9864
FM-8800S-R-MIC-N 05EC-X-9865 -1 1/1
NAME OUTLINE DESCRIPTION/CODE Q'TY NAME OUTLINE DESCRIPTION/CODE Q'TY
UNIT
IME-56420-* 1
DM-2003-F 1
MICROPHONE
005-377-760-00
INSTALLATION MATERIALS CP05-09900
CP05-09901 1
INSTALLATION MATERIALS
005-377-800-00
05S9371-2 1
CABLE ASSY.
000-151-711-12
DOCUMENT
(VHF/MF)
E52-00101-* 1
VHF/MF DISTRESS ALERT
FLOW 000-809-270-0*
OSE-56420-* 1
OPERATOR'S GUIDE
000-149-934-0*
A-17
DIMENSIONS IN DRAWING FOR REFERENCE ONLY. TWO TYPES AND CODES MAY BE LISTED FOR AN ITEM. THE LOWER PRODUCT MAY BE SHIPPED IN PLACE OF THE
UPPER PRODUCT. QUALITY IS THE SAME. 05EC-X-9865
FM-8800S-R-HS-A 05EC-X-9866 -0 1/1
NAME OUTLINE DESCRIPTION/CODE Q'TY NAME OUTLINE DESCRIPTION/CODE Q'TY
UNIT
CP05-09901 1
SP05-05501 1 TIC-56420-* 1
SPARE PARTS DISTRESS PROCEDURE
005-377-820-00 000-149-935-0*
ACCESSORIES FP05-05700
OME-56421-* 1
DIMENSIONS IN DRAWING FOR REFERENCE ONLY. TWO TYPES AND CODES MAY BE LISTED FOR AN ITEM. THE LOWER PRODUCT MAY BE SHIPPED IN PLACE OF THE
UPPER PRODUCT. QUALITY IS THE SAME. 05EC-X-9866
FM-8800S-R-MIC-A 05EC-X-9867 -0 1/1
NAME OUTLINE DESCRIPTION/CODE Q'TY NAME OUTLINE DESCRIPTION/CODE Q'TY
UNIT DOCUMENT
(VHF/MF)
IF-8810 1 E52-00101-* 1
JUNCTION BOX VHF/MF DISTRESS ALERT
000-054-219-00 FLOW 000-809-270-0*
FM-8800S-R 1 OSE-56420-* 1
TRANSCEIVER UNIT OPERATOR'S GUIDE
000-054-404-00 000-149-934-0*
SPARE PARTS SP05-05501
IME-56420-* 1
CP05-09901 1
INSTALLATION MATERIALS
005-377-800-00
05S9371-2 1
CABLE ASSY.
000-151-711-12
INSTALLATION MATERIALS CP05-08701
CP05-08701 1
INSTALLATION MATERIALS
005-949-280-00
A-19
DIMENSIONS IN DRAWING FOR REFERENCE ONLY. TWO TYPES AND CODES MAY BE LISTED FOR AN ITEM. THE LOWER PRODUCT MAY BE SHIPPED IN PLACE OF THE
UPPER PRODUCT. QUALITY IS THE SAME. 05EC-X-9867
Y. Hatai
D-1
Y. Hatai
D-2
Y. Hatai
D-3
D-4
Y. Hatai
Y. Hatai
D-5
D-6
Y. Hatai
D-7
Y. Hatai
D-8
Y. Hatai
Apr.20'07 R.Esumi
D-9
D-10
D-11
Feb.02'05
D-12
D-13
Nov.28'03
D-14
D-15
Dec.19,'06 R.Esumi
D-16
Y. Hatai
D-17
Dec.19'06 R.Esumi
D-18
D-19
Dec.26'03
D-20
Dec.26'03
Y. Hatai
D-21
Dec.26'06 R.Esumi
D-22
1 2 3 4 5 6 S-1
TRANSCEIVER UNIT JUNCTION BOX TTYCS-4(*1) OR /
T/R *2 IF-8810 TXD-H 1 CO-0.2x2P (*2)
ANTENNA FOR T/R ANT FM-8800D/S NAVIGATOR/PLOTTER
*1 IEC61162-1(NMEA)/REMOTE XM2A-3701 P
M-P-7 J1 J1 TXD-C 2
RG-10/UY +15VDC 1 5m RXD-H
1 1 3
P P
2 +15VDC 2 2 RXD-C 4
CH70 WR *2 *1
ANTENNA FOR CH70 WR CH70 RX ANT +15VDC 3
P
3 F.GND 5 *4
*1 +15VDC 4 4 EXT.ALM-N TTYCS-1,MAX.20m
M-P-7 J2 6 EXTERNAL ALARM
RG-10/UY 1 NC 5 *6 0V
5 7
A 2 NC 6
P
6 F.GND 8
*2
*4 CO-0.2x5P,MAX.20m
Wing Mic
TXD-H 7 7 W_MIC1-H 9 RED TB1 1
HANDSET P P HANDSET *2
TXD-C 8 8 W_MIC1-C 10 YEL 1 2
HANDSET RXD-H 9 9 W_SP1-H 11 BLK 2 3 HS-6000FZ-11
1 S.GND MIC RECEPTACLE HS-6000FZ-5
P P
HS-2003 2 PTT SW-N RXD-C 10 10 W_SP1-C 12 YEL 3 BOX 4
3 MIC-H J2 W_PTT1-N 13 WHT 4 RBD-VHF(B) *2 5
P
4 MIC-C EXT.ALM-N 11 1 0V 14 YEL 7
P
5 HS SP-H 0V 12 2 F.GND 15 Wing Mic
*2
6 HOOK SW-N W_MIC1-H 13 3 CO-0.2x5P,MAX.20m
P
7 +5V W_MIC1-C 14 4 W_MIC2-H 16 RED TB1 1
P HANDSET *2
8 F.GND W_SP1-H 15 5 W_MIC2-C 17 YEL 1 2
P HS-6000FZ-11
W_SP1-C 16 6 W_SP2-H 18 BLK 2 MIC RECEPTACLE 3
P HS-6000FZ-5
W_PTT1-N 17 7 W_SP2-C 19 YEL 3 BOX 4
P
3.5 SPKR 0V 18 8 W_PTT2-N 20
P
WHT 4 RBD-VHF(B) *2 5
2.8m 0V 0V 21
EXT. SPEAKER SP-H 19 9 YEL 7
P
SEM-21Q *2 SP-C 0V 20 10 F.GND 22
0V 21 11 *1
P TTYCS-1,MAX.20m HANDSET HANDSET
0V 22 12 VDR AF-H 23 VDR HS-8800/8800W *2 HS-8800/8800W *2
J3 VDR AF-C 24
VDR AF-H 23 1 NOT USED_1 25 *4
B VDR AF-C 24
P
2 NOT USED_2 26
05S9371,3m 15A
24VDC 24VDC(+) DATA-A F.GND 27
10
10
RED 25 3
1
P 50m
*2 TOTAL *2
BLK 24VDC(-) DATA-B 26 4 50m OR LESS TO TERMINATE TB1 TB2 05S0309 TB1 TB2 *5
05S0309
LINE OUT-H 27 5 +15VDC 28 () WHT[B] 1 1 () WHT[B] 1 1
P P 2 2 REMOTE STATION
LINE OUT-C 28 6 0V 29 () BLK[B] 2 () BLK[B] 2
*1 REMOTE STATION REMOTE STATION RB-8800/8810/8810W
100-115/ LINE IN-H 29 7 DATA-A 30 GRN 3 RB-8800/8810/8810W 3 GRN 3 RB-8800/8810/8810W 3 <No.3/No.4>
P P
200-230VAC DPYC-1.5 AC DC + LINE IN-C 30 8 DATA-B 31 BLU 4 <No.1> *2 *3 4 BLU 4 <No.2> *2 *3 4
1,50/60Hz IN AC/DC OUT - W_MIC2-H 31 9 LINE IN-H 32 RED 5 LINE IN-H 5 RED 5 5
*1 P P
W_MIC2-C 32 10 LINE IN-C 33 BRN 6 LINE IN-C 6 BRN 6 6
DPYC-4
24VDC + DC AC/DC POWER W_SP2-H 33 11 LINE OUT-H 34 YEL 7 LINE OUT-H 7 YEL 7 7
SUPPLY UNIT 17JE-23250 PRINTER P P
- IN PR-240 W_SP2-C 34 12 LINE OUT-C 35 ORG 8 LINE OUT-C 8 ORG 8 8
-02(D8C)
1 W_PTT2-N 35 13 F.GND 36 SHIELD G SHIELD G
P *4
0V 36 14 NC 37 50m *2
PE *1 *2 TOTAL 50m OR LESS TO TERMINATE
-20N(D8) 16S0184,3m
25 F.GND 37 05S0309
IV-2sq. 05S0309 TB1
GND +15VDC 38 () WHT[B] 1 11 () WHT[B] 1
P DMC I/F
0V 39 () BLK[B] 2
IF-8820 *2
12 () BLK[B] 2 HANDSET *2
*1 DATA-A 40 GRN 3 13 GRN 3 REMOTE STATION HS-8800/8800W
IV-2sq. P RB-8800/8810/8810W
57FE-30360
FM14-2S
24VDC VCTF0.75x2C,3m
WHT 1 (+)
(05S0441) PRINTER *2
BLK 2 (-)
PP-8800A *1
IV-1.25sq.
TRANSCEIVER UNIT JUNCTION BOX TTYCS-4(*1) OR /
T/R *2 IF-8810 TXD-H 1 CO-0.2x2P (*2)
ANTENNA FOR T/R ANT FM-8800D/S NAVIGATOR/PLOTTER
*1 IEC61162-1(NMEA)/REMOTE XM2A-3701 P
M-P-7 J1 J1 TXD-C 2
RG-10/UY +15VDC 1 RXD-H
1 1 3
P P
2 +15VDC 2 2 RXD-C 4
CH70 WR *2 *1
A ANTENNA FOR CH70 WR CH70 RX ANT +15VDC 3
P
3 F.GND 5 *4
*1 +15VDC 4 4 EXT.ALM-N TTYCS-1,MAX.20m
M-P-7 J2 6 EXTERNAL ALARM
RG-10/UY 1 NC 5 *6 0V
5 7 *2 Wing Mic
P *4 CO-0.2x5P,MAX.20m
2 NC 6 6 F.GND 8
TXD-H 7 7 W_MIC1-H 9 RED TB1 1
HANDSET P P HANDSET *2
TXD-C 8 8 W_MIC1-C 10 YEL 1 2
HANDSET RXD-H 9 9 W_SP1-H BLK 2 3 HS-6000FZ-11
1 S.GND 11 MIC RECEPTACLE
P P HS-6000FZ-5
HS-2003 2 PTT SW-N RXD-C 10 10 W_SP1-C 12 YEL 3 BOX 4
3 MIC-H J2 W_PTT1-N 13 WHT 4 RBD-VHF(B) *2 5
P
4 MIC-C EXT.ALM-N 11 1 0V 14 YEL 7
P
5 HS SP-H 0V 12 2 F.GND 15 Wing Mic
*2
6 HOOK SW-N W_MIC1-H 13 3 CO-0.2x5P,MAX.20m
P
7 +5V W_MIC1-C 14 4 W_MIC2-H 16 RED TB1 1
P HANDSET *2
8 F.GND W_SP1-H 15 5 W_MIC2-C 17 YEL 1 2
P HS-6000FZ-11
W_SP1-C 16 6 W_SP2-H 18 BLK 2 MIC RECEPTACLE 3
P HS-6000FZ-5
W_PTT1-N 17 7 W_SP2-C 19 YEL 3 BOX 4
P
3.5 SPKR 0V 18 8 W_PTT2-N 20
P
WHT 4 RBD-VHF(B) *2 5
2.8m 0V 0V 21
EXT. SPEAKER SP-H 19 9 YEL 7
P
SEM-21Q *2 SP-C 0V 20 10 F.GND 22
0V 21 11 *1
P TTYCS-1,MAX.20m HANDSET HANDSET
B 0V 22 12 VDR AF-H 23 VDR HS-8800/8800W *2 HS-8800/8800W *2
J3 VDR AF-C 24
VDR AF-H 23 1 NOT USED_1 25 *4
P
VDR AF-C 24 2 NOT USED_2 26
DATA-A F.GND 27
10
10
25 3
1
GND P 50m
*2 TOTAL *2
*1 DATA-B 26 4 TB1 TB2 05S0309 TB1 TB2
IV-2sq. 05S0309
50m OR LESS TO TERMINATE *5
LINE OUT-H 27 5 +15VDC 28 () WHT[B] 1 1 () WHT[B] 1 1
P P 2 2 REMOTE STATION
LINE OUT-C 28 6 0V 29 () BLK[B] 2 () BLK[B] 2
REMOTE STATION REMOTE STATION RB-8800/8810/8810W
LINE IN-H 29 7 DATA-A 30 GRN 3 RB-8800/8810/8810W 3 GRN 3 RB-8800/8810/8810W 3
P P <No.3/No.4>
LINE IN-C 30 8 DATA-B 31 BLU 4 <No.1> *2 *3 4 BLU 4 <No.2> *2 *3 4
*1 TB1 CB 15A W_MIC2-H 31 9 LINE IN-H 32 RED 5 LINE IN-H 5 RED 5 5
DPYC-2.5 P P
24VDC 1 RED 24VDC(+) W_MIC2-C 32 10 LINE IN-C 33 BRN 6 LINE IN-C 6 BRN 6 6
2 BLK 24VDC(-) W_SP2-H 33 11 LINE OUT-H 34 YEL 7 LINE OUT-H 7 YEL 7 7
P P
3 W_SP2-C 34 12 LINE OUT-C 35 ORG 8 LINE OUT-C 8 ORG 8 8
4 W_PTT2-N 35 13 F.GND 36 SHIELD G SHIELD G
P *4
PRINTER
5 0V 36 14 NC 37 50m *2
EMERGENCY LAMP 6 F.GND 37 *2 TOTAL 50m OR LESS TO TERMINATE
05S0309
05S0309
EMG-1T *2 7 +15VDC 38 () WHT[B] 1 11 () WHT[B] 1 TB1
P2 P DMC I/F 2
8 0V 2 HANDSET *2
25
39 () BLK[B] 12 () BLK[B]
1
DATA-A 40 GRN 3
IF-8820 *2 13 GRN 3 REMOTE STATION HS-8800/8800W
J2 P RB-8800/8810/8810W
DATA-B 41 BLU 4 14 BLU 4
C LINE IN-H 42 RED 5 15 RED 5
*2
*5
P
LINE IN-C 43 BRN 6 16 BRN 6
LINE OUT-H 44 YEL 7 17 YEL 7 REMOTE STATION
36
S1 P RB-8800/8810/8810W
J2
*2
40
TB1/TB2
1
P
J2
T/R *2 TRANSCEIVER UNIT
ANTENNA FOR T/R ANT FM-8800D/S
*1 IEC61162-1(NMEA)/REMOTE XM2A-3701
RG-10/UY M-P-7 J1
1 +15VDC 2
2 +15VDC 3
CH70 WR *2 +15VDC 4
ANTENNA FOR CH70 WR CH70 RX ANT
*1 NC 5
RG-10/UY M-P-7 J2
1 NC 6 TTYCS-4(*1) OR /
A 2 TXD-H 7 CO-0.2x2P (*2)
P NAVIGATOR/PLOTTER
TXD-C 8
HANDSET RXD-H 9
HANDSET P *1
1 S.GND RXD-C 10
EXT.ALM-N 11 TTYCS-1,MAX.20m
HS-2003 2 PTT SW-N EXTERNAL ALARM
3 MIC-H *5 0V 12
*2
4 MIC-C CO-0.2x5P,MAX.20m
5 HS SP-H W_MIC1-H 13 RED TB1 1
P HANDSET *2
6 HOOK SW-N W_MIC1-C 14 YEL 1 2
W_SP1-H BLK 2 3 HS-6000FZ-11
7 +5V 15 MIC RECEPTACLE HS-6000FZ-5
P
8 F.GND W_SP1-C 16 YEL 3 BOX 4
W_PTT1-N 17 WHT 4 5 Wing Mic
P RBD-VHF(B) *2
0V 18 YEL 7
3.5 SPKR 0V 20
2.8m 0V
EXT. SPEAKER SP-H 21
SP-C 0V 22 *1
SEM-21Q *2 TTYCS-1,MAX.20m
VDR AF-H 23 VDR
VDR AF-C 24 50m
*2 TOTAL 50m OR LESS TO TERMINATE
05S9371,3m 15A 05S0309
24VDC 24VDC(+) +15VDC 1 () WHT[B] 1
B RED
BLK 24VDC(-) 0V 19
P
() BLK[B] 2
DMC I/F
DATA-A 25 GRN 3
IF-8820 *2
*1 P
100-115/ DATA-B 26 BLU 4
200-230VAC DPYC-1.5 LINE OUT-H *2
AC DC + 27
P
RED 5 TB1/TB2
1,50/60Hz IN LINE OUT-C TXD-H CO-0.2x2P,MAX.30m TXD-H
AC/DC OUT - 28 BRN 6 20 1
*1 P DISTRESS MESSAGE
LINE IN-H 29 YEL 7 TXD-C 21 2 TXD-C
DPYC-4 AC/DC POWER P CONTROLLER
24VDC + DC LINE IN-C 30 ORG 8 RXD-H 22 3 RXD-H
SUPPLY UNIT P DMC-5
- IN SHIELD 9 F.GND RXD-C 23 4 RXD-C
PR-240
10 NC F.GND 24 5 F.GND
PE *1 *2
IV-2sq. CO-0.2x5P,MAX.20m
W_MIC2-H 31 RED TB1 1
17JE-23250 PRINTER P HANDSET *2
W_MIC2-C 32 YEL 1 2
16S0184,3m -02(D8C) 1 HS-6000FZ-11
57FE-30360
RM12BPE-3S J1 GND
24VDC VCTF0.75x3C,5m
1 24V+
C (16S0084)
RED
BLK 2 0V PRINTER *1
PP-510 *2 IV-2sq.
WHT 3 GND
OR
36
1
FM14-2S
24VDC VCTF0.75x2C,3m (+)
WHT 1
(05S0441) PRINTER *2
BLK 2 (-)
PP-8800A *1
IV-1.25sq.
TRANSCEIVER UNIT JUNCTION BOX TTYCS-4(*1) OR /
T/R *2 IF-8810 TXD-H 1 CO-0.2x2P (*2)
ANTENNA FOR T/R ANT FM-8800D/S NAVIGATOR/PLOTTER
*1 IEC61162-1(NMEA)/REMOTE XM2A-3701 P
M-P-7 J1 J1 TXD-C 2
RG-10/UY +15VDC 1 RXD-H
1 1 3
P P
2 +15VDC 2 2 RXD-C 4
CH70 WR *2 *1
A ANTENNA FOR CH70 WR CH70 RX ANT +15VDC 3
P
3 F.GND 5 *4
*1 +15VDC 4 4 EXT.ALM-N TTYCS-1,MAX.20m
M-P-7 J2 6 EXTERNAL ALARM
RG-10/UY 1 NC 5 *6 0V
5 7 *2 Wing Mic
P *4 CO-0.2x5P,MAX.20m
2 NC 6 6 F.GND 8
TXD-H 7 7 W_MIC1-H 9 RED TB1 1
HANDSET P P HANDSET *2
TXD-C 8 8 W_MIC1-C 10 YEL 1 2
HANDSET RXD-H 9 9 W_SP1-H BLK 2 MIC RECEPTACLE 3 HS-6000FZ-11
1 S.GND 11
P P HS-6000FZ-5
HS-2003 2 PTT SW-N RXD-C 10 10 W_SP1-C 12 YEL 3 BOX 4
3 MIC-H J2 W_PTT1-N 13 WHT 4 RBD-VHF(B) *2 5
P
4 MIC-C EXT.ALM-N 11 1 0V 14 YEL 7
P
5 HS SP-H 0V 12 2 F.GND 15 Wing Mic
*2
6 HOOK SW-N W_MIC1-H 13 3 CO-0.2x5P,MAX.20m
P
7 +5V W_MIC1-C 14 4 W_MIC2-H 16 RED TB1 1
P HANDSET *2
8 F.GND W_SP1-H 15 5 W_MIC2-C 17 YEL 1 2
P HS-6000FZ-11
W_SP1-C 16 6 W_SP2-H 18 BLK 2 MIC RECEPTACLE 3
P HS-6000FZ-5
W_PTT1-N 17 7 W_SP2-C 19 YEL 3 BOX 4
P
3.5 SPKR 0V 18 8 W_PTT2-N 20
P
WHT 4 RBD-VHF(B) *2 5
2.8m 0V 0V 21
EXT. SPEAKER SP-H 19 9 YEL 7
P
SEM-21Q *2 SP-C 0V 20 10 F.GND 22
0V 21 11 *1
P TTYCS-1,MAX.20m HANDSET HANDSET
B 0V 22 12 VDR AF-H 23 VDR HS-8800/8800W *2 HS-8800/8800W *2
J3 VDR AF-C 24
VDR AF-H 23 1 NOT USED_1 25 *4
P
VDR AF-C 24 2 NOT USED_2 26
DATA-A F.GND 27
10
10
25 3
1
GND P 50m
*2 TOTAL *2
*1 DATA-B 26 4 TB1 TB2 TB1 TB2
IV-2sq. 05S0309
50m OR LESS TO TERMINATE 05S0309 *5
LINE OUT-H 27 5 +15VDC 28 () WHT[B] 1 1 () WHT[B] 1 1
P P 2 2 REMOTE STATION
LINE OUT-C 28 6 0V 29 () BLK[B] 2 () BLK[B] 2
REMOTE STATION REMOTE STATION RB-8800/8810/8810W
LINE IN-H 29 7 DATA-A 30 GRN 3 RB-8800/8810/8810W 3 GRN 3 RB-8800/8810/8810W 3
P P <No.3/No.4>
LINE IN-C 30 8 DATA-B 31 BLU 4 <No.1> *2 *3 4 BLU 4 <No.2> *2 *3 4
*1 TB1 CB 15A W_MIC2-H 31 9 LINE IN-H 32 RED 5 LINE IN-H 5 RED 5 5
DPYC-2.5 P P
24VDC 1 RED 24VDC(+) W_MIC2-C 32 10 LINE IN-C 33 BRN 6 LINE IN-C 6 BRN 6 6
2 BLK 24VDC(-) W_SP2-H 33 11 LINE OUT-H 34 YEL 7 LINE OUT-H 7 YEL 7 7
P P
3 W_SP2-C 34 12 LINE OUT-C 35 ORG 8 LINE OUT-C 8 ORG 8 8
4 W_PTT2-N 35 13 F.GND 36 SHIELD G SHIELD G
P *4
PRINTER
5 0V 36 14 NC 37 50m *2
EMERGENCY LAMP 6 F.GND 37 *2 TOTAL 50m OR LESS TO TERMINATE
05S0309
05S0309
EMG-1T *2 7 +15VDC 38 () WHT[B] 1 11 () WHT[B] 1 TB1
P DMC I/F 2
8 0V 2 HANDSET *2
25
39 () BLK[B] 12 () BLK[B]
1
DATA-A 40 GRN 3
IF-8820 *2 13 GRN 3 REMOTE STATION HS-8800/8800W
P RB-8800/8810/8810W
DATA-B 41 BLU 4 14 BLU 4
C LINE IN-H 42 RED 5 15 RED 5 *2
*5
P
LINE IN-C 43 BRN 6 16 BRN 6
LINE OUT-H 44 YEL 7 17 YEL 7 REMOTE STATION
36
S1 P RB-8800/8810/8810W
J2
J6
1
J2
F.GND 24 5 F.GND
PRINTER
UTP-58E
RACK CONSOLE