Professional Documents
Culture Documents
Wedge Side Table en
Wedge Side Table en
Production process:
1. Cutting of the table top and the leg elements.
2. Milling of the slots.
3. Milling of all edge chamfers.
4. Milling of the bottom fixation part & drilling of the screw holes.
Assembly
1. Required parts: 1x table top, 3x legs, 1x bottom fixation interface 3x screws
2. Assembly of the under construction, leg one &two ...
3. ... &leg three.
4. Insert of the fixation bottom part.
5. Fasten the screws.
6. Finished table.