Professional Documents
Culture Documents
Technical Information MX 400 With CO2 + IBP
Technical Information MX 400 With CO2 + IBP
Technical Information MX 400 With CO2 + IBP
PATIENT MONITOR
TECHNICAL SPECIFICATION
Enviromental Specification
Operating temperature : 0-45 deg. C ( 32 to 108 deg . F )
Storage temperature : -40 to 60 deg.C
Storage Humidity : 5% to 95% RH, Non condensing
Operating altitude : -500 to 3000m
Storage Altitude : -500 to 4600m
Power
AC 100 to 240 V , 50/60Hz
DC 10 to 16 V , 5A max
Monitor Performance
LCD TFT Display : 9 inch, Touch screen
Screen Size : 196 x 118 mm
Resolution : 800 x 480 pixels
Pixel size : 0,246 x 0,246 mm
Refresh rate : 60 hz
Parameter : HR/PR,ECG,RR,Spo2,Temp, IBP, EtCO2
Battery status
External power LED
Battery ( Standard )
Operating time : 5 Hours type ( fully charged battery )
Functionally : ICU Configuration, Neonatal Configuration, OR Configuration, Cardiac configuration, Networking Capability.
SpO2 Performance
% saturation range : 0 to 100 %
pulse rate range : 30 to 300 bpm
Spo2 accuracy : 70 to 100%
Pulse rate accuracy :+2%
Resolution : 1 bpm
NIBP performance
Technique : Oscillometric
Measurement Mode : Manual and automatic
Automatic intervals : 1,2,2.5,3,5,10,15,20,30,45,60,120 minutes
Stat mode cycle time : 5 minutes
Cuff pressure display : 10 to 300 mmhg
Accuracy : +- 5 mmHg
Blood Pressure measurement range :
Systolic : 30 to 270 mmhg
Diastolic : 10 to 245 mmhg
Mean : 20 to 255 mmhg
Heart rate range : 40 to 300 bpm
Gain accuracy
Accuracy : 1% full scales
Pulse rate limit alarm : 30 to 300 bpm
Pulse rate measurement range : 25 to 350 bpm
ECG performance
Leads : 3,5,10 leads and with EASI method could to 12 lead ECG with 5 cable leadwire.
Baseline Recovery Time : Less than one second after defibrillation
Heart rate range : 15 to 300 bpm
Heart rate accuracy : 1% of range
Bandwidth : 0.05 to 150 hz
Display sweep speeds : 12.5,25,50 mm/sec
ECG size sensitifity : 0.5, 1,2,4,5 mv/cm
Respiration performance
Rate : 0 to 170 rpm
Accuracy : + 1 rpm
Display sweep speed : 6.25,12.5, 25,50 mm/sec
Temperature performance
Range : -1 to 45 C ( 30 to 113 F )
Resolution : 0.1 C
Accuracy : 0.1 C
Average time constant : less than 10 second
Test temperature : 40 c + 1 C ( 104 F + 0.2 F)
Limit Alarms : Range 1 to 45 C ( 30 to 113 F )
EtC02
Measurement range : 0-150 mmhg
Accuracy : 0 to 40 mmhg
EtCo2 alarm limit: Low : 10 to 90 mmhg
High : 20 to 95 mm hg
AWRR ( Airway resp adapter ) : 2 to 150 RPM
Power Suply
Power : 95-265 V AC, 50-60HZ
Battery : 10.8 V 6000 mAh Lithium Ion
Charging Time : up to 5 Hours (depend on condition)
Accessories Include:
ECG Trunk Cable : 1 pcs
5 Leads ECG Set Cable : 1 pcs
ECG Electrode Disposable : 1 set
NIBP Interconnect Tubing : 1 pcs
NIBP Cuff Adult : 1 pcs
SpO2 Probe Adult : 1 pcs
Skin Temp Probe : 1 pcs
EtCO2 Reusable Adapter : 1 set
IBP Pressure Cable : 1 pcs
IBP Transducer : 1 pcs
Power Cord : 1 pcs
Manual Book : 1 pcs