Professional Documents
Culture Documents
00 - B053 - PC SigmaCover PDF
00 - B053 - PC SigmaCover PDF
Unrivalled performance and protection The benefits of SigmaCover result in easy-to-apply, cost-effective
solutions within a wide range of applications across the protective
coatings industry.
PPG Protective & Marine Coatings (PMC) is a
The following specific characteristics can be found in certain
world leader in protective and marine coatings.
products within the SigmaCover range:
lG
ood adhesion on coil-coated l E xcellent adhesion to non-ferrous l S uitable for atmospheric conditions
substrates such as PVC, plastisol substrates and galvanized steel l E xcellent corrosion resistance in
PVDF, polyester and polyurethane l E xcellent universal primer for industrial or coastal applications
l High-impact resistance and flexibility atmospheric or immersion applications l C old-cure characteristics down to
l Long pot life but short drying times l C ompatible with well-designed -10C/14F with unlimited
l E asy application by brush, roller and cathodic protection systems recoatability
spray l Long recoating intervals lG
ood adhesion to galvanized steel
l S uitable on wet blast substrates l E asy application by brush, roller and
(damp or dry) spray
SigmaCover 522 l T he low-temperature cure version
Micaceous iron oxide pigmented epoxy sealer allows curing down to -10C/14F
SigmaCover 211
l S pecifically designed as sealer for
Epoxy concrete primer and sealer
zinc-rich and thermal metal-sprayed
surfaces
l Specifically designed for concrete
lC
an be used as a primer and sealer or substrates
coating on steel, thermal metal-spray
lG
ood chemical resistance
zinc and galvanizing
lG
ood impact and abrasion resistance
lU
sed for both atmospheric and
immersion applications l E asy to clean
l Good abrasion and impact resistance
lH
igh-temperature resistance up to
200C/392F in dry atmospheric
conditions
SigmaCover 480
Chemical-resistant finish SigmaCover 435 SigmaCover 300
Micaceous iron oxide pigmented recoatable High build coal tar epoxy
l General purpose epoxy epoxy coating
lR
esistance to impact and abrasion lO
utstanding water and crude oil
l Excellent durability, tough with
l E xtended recoating intervals resistance
long-term flexibility
l E asy application by brush, roller lC
old-cure characteristics down to
l C old-cure characteristics down to
and spray -5C/23F
-10C/14F with unlimited
l E asy to clean recoatability l Good abrasion resistance
lG
ood adhesion to aged alkyds, lC
ompatible with well-designed
chlorinated rubber and epoxy coatings cathodic protection systems
l T emperature resistance up to l E xcellent corrosion resistance in
200C/392F industrial and coastal applications
SigmaCover 805 480 456 456HS 435 410 410LT 300 300LT
Corrosion resistance ++++ N.A. N.A. N.A. ++ N.A. N.A. ++++ ++++
Touch-dry +++ +++++ ++++ + ++++ +++ ++++ ++ ++++
Low-temperature cure + + ++++ ++++ +++ + +++ +++ ++++
Recoatability ++ +++ +++++ ++++ +++++ ++++ ++++ ++ ++
Film build (m) 150 50 75-150 75-150 75-150 75-150 75-150 125-500 125-500
Volume solids (%) 82 50 65 73 63 80 80 71 71
Surface tolerant coatings
SigmaCover 1500 SigmaCover 640 SigmaCover 240
Solvent-free maintenance epoxy Two-pack, ultra-high solids epoxy High-solids, low-temperature cure epoxy
l Primer and buildcoat l Self-priming, surface-tolerant epoxy l Outstanding water and crude oil
l Solvent-free in aluminum and colors resistance
l Compatible with most aged coatings l Convenient 1:1 mixing ratio by volume l C old-cure characteristics down to
l Excellent corrosion resistance in l Low-temperature cure version available -20C/-4F
industrial or coastal applications l Excellent surface-tolerant l Good abrasion resistance
characteristics l Topcoating up to 6 months
l Resistance to industrial, coastal and
offshore conditions
SigmaCover 1000
High-build, solvent-free epoxy
SigmaCover 1000
l Solvent-free, high-build, one-coat maintenance epoxy
SigmaCover 805
l High-solids epoxy direct applicable to steel
SigmaCover 630
l High-solids surface-tolerant epoxy coating. Low-temperature cure option
SigmaCover 566
l Epoxy acrylic tiecoat with good adhesion on coil-coated substrates such as PVC and polyester
SigmaCover 522
l Micaceous iron oxide pigmented epoxy sealer, specifically for zinc-rich and metal-sprayed surfaces
SigmaCover 480
l Chemical, impact and abrasion-resistant epoxy finish
SigmaCover 456
l Recoatable epoxy coating curing at temperatures down to -10C/14F
SigmaCover 435
l L ow-temperature micaceous iron oxide pigmented recoatable epoxy coating.
Heat resistance up to 200C/392F
SigmaCover 410
l Economy buildcoat. Low-temperature cure option
SigmaCover 300
l High-build coal tar epoxy highly resistant to water and crude oil. Cold-cure option down to -5C/23F
SigmaCover 280
l Universal epoxy primer for atmospheric and immersion conditions. Cold-cure option
SigmaCover 256
l Zinc phosphate recoatable epoxy primer. Cold-cure down to -10C/14F
SigmaCover 211
l Epoxy primer and sealer specifically designed for concrete substrates
PPG Protective
& Marine Coatings
PPG Protective & Marine Coatings brings unrivalled levels
of innovation, experience and expertise in coatings technology,
supported through our expanding global supply and distributors
network in over 80 countries.