Professional Documents
Culture Documents
Parking Brake Mechanism: Disassembly/Inspection/Reassembly
Parking Brake Mechanism: Disassembly/Inspection/Reassembly
Parking Brake Mechanism: Disassembly/Inspection/Reassembly
3. Remove the bolt securing the detent lever to the control shaft, then remove the control shaft.
4. Remove the detent lever and parking brake rod assembly from the transmission housing.
NOTE: See page 14-201 and 14-202 when installing the A/T gear position switch.
TRANSMISSION
HOUSING
CONTROL SHAFT
DETENT SPRING
LOCK WASHER
Replace.
6x 1.0 mm
PARKING BRAKE 12 N-m (1.2kgfm, 8.7 Ibf-ft)
ROD ASSEMBLY
PARKING BRAKE
ROD
DETENT LEVER
6x 1.0 mm
14 N-m
(1.4 kgf-m, LOCK WASHER
10 Ibf-ft) Replace. DETENT
LEVER