Professional Documents
Culture Documents
Materiale 14NiCrMo13-4 1.6657
Materiale 14NiCrMo13-4 1.6657
FADH
14NiCrMo13-4
Variants:
SPECIFICATIONS COMPOSITION
European standards: Carbon ..............................................0.16
- 14NiCrMo13-4 Nickel ................................................3.20
- Numerical designation: 1.6657 Chromium ..........................................1.00
AIR : 16 NCD 13 Molybdenum......................................0.25
WL : 1.6657
BS : S 157
1414j
HEAT TREATMENT TEMPERING CURVE
Carburising:
N/mm2 % J/cm2
- approximately 900C. UTS - 0.2 % YS A %: 5d
2300 N/mm2 KCU: J/cm2
46 460
2200 44 440
Harden: 2100 42 420
- Heat to 825/850C. 2000 40 400
1900 38 380
- Oil quench.
1800 36 360
1700 34 340
Temper: 1600 32 320
- After carburising and hardening, the 1500 30 300
steel is tempered between 140C and 1400 UTS 28 280
1300 26 260
200C as required.
1200 24 240
- For use in the non carburised heat 0.2 % YS
1100 22 220
treated condition, temper in accordance 1000 20 200
with properties required. 900 18 180
800 16 160
A
700 14 140
600 12 120
PHYSICAL PROPERTIES 500
K
10 100
400 8 80
Density: 7.8 300 6 60
200 4 40
100 2 20
Mean coefficient of expansion in m/m.C:
0 0 0
- between 20C and 100C: 11.3 x 10-6 200 300 400 500 600 700
- between 20C and 700C: 14.0 x 10 -6
Heated to 825/850C, oil quenched.
(Heat treatment on rough machined blanks)
Critical points:
- Ac 1: 690C
- Ac 3: 780C
FORGING
1100/900C
The data provided in this document represent typical or average values rather than maximum or minimum guaranteed values. The applications indicated for the grades described are given as
guidance only in order to help the reader in his personal assessment. Please note that these do not constitute a guarantee whether implicit or explicit as to whether the grade selected is suited to
specific requirements. Aubert & Duvals liability shall not under any circumstances extend to product selection or to the consequences of that selection.
1414j FADH