Professional Documents
Culture Documents
Wind Load Calculation
Wind Load Calculation
LOADINGS
Structural DATA
length 6.2 m
Bay Width 6.3 m
LOADING
Dead Loads:
Self Wt of members By Design program
Air Permeability 0%
Cp +ve (Downward)
all values of Cp = 0.4
Cp -ve (Upward)
when Cp = 1.4
0.9
Downward Force
Downward +ve force on Main Frame 0.0263 KN/m
Upward Force
Upward -ve force on Main Frame 0.09189 KN/m
MAX 1 TO CONSIDER
Min. Clear
KN/Sqm Height, h1= 2.2 m
Actual clear
height h2= 2.7 m
h1/h2 = 0.83 say 0.9
KN/Sqm NOTE For the design of cladding or its fixings to a structural member, Class A shoul
applicable to the particular area in which the cladding lies.
For the design of a structural member carrying the cladding, Class B or C should be
the area in which the member lies. In considering the design against high local pres
cladding, the secondary effects such as distribution due to the stiffness of the cladd
0.26 For main structural members the design should be to Class B or C using the normal
0.9
units (kgf/m2 and m/s)
f/ft2 and mile/h).
Vs = Vb x Sa x Sd x Ss x Sp
pAltitude factor
Building size:
H = 26.2 m
L = 44.3 m
Ve = Vs x Sb
Sb = 1.97 for distance 30 km from sea and He = 26.2 m
Ve = Vs x Sb = 16.80 x 1.932 = 32.5 m/s
pDynamic Pressure
qs = 0.613 x Ve2
qs = 0.613 x (32.5)2 = 647.5 N/m2 = 0.65
kN/m2
Load Calculation Pyramid Type Wall Supported Shade Structure
LOADINGS
Structural DATA
length 6m
Bay Width 9m
LOADING
Dead Loads:
Self Wt of members By Design program
Air Permeability 0%
Cp +ve (Downward)
all values of Cp = 0.4
Cp -ve (Upward)
when Cp = 1.4
0.9
Downward Force
Downward +ve force on Main Frame 0.0184 KN/m
Upward Force
Upward -ve force on Main Frame 0.064323 KN/m
MAX 1 TO CONSIDER
Min. Clear
KN/Sqm Height, h1= 2.2 m
Actual clear
height h2= 2.7 m
h1/h2 = 0.83 say 0.9
KN/Sqm NOTE For the design of cladding or its fixings to a structural member, Class A shoul
applicable to the particular area in which the cladding lies.
For the design of a structural member carrying the cladding, Class B or C should be
the area in which the member lies. In considering the design against high local pres
cladding, the secondary effects such as distribution due to the stiffness of the cladd
0.26 For main structural members the design should be to Class B or C using the normal
0.9
units (kgf/m2 and m/s)
f/ft2 and mile/h).
LOADINGS
Structural DATA
length 6m
Bay Width 7.2 m
LOADING
Dead Loads:
Self Wt of members By Design program
Air Permeability 0%
Cp +ve (Downward)
all values of Cp = 0.4
Cp -ve (Upward)
when Cp = 1.4
0.9
Downward Force
Downward +ve force on Main Frame 0.0230 KN/m
Upward Force
Upward -ve force on Main Frame 0.080403 KN/m
MAX 1 TO CONSIDER
Min. Clear
KN/Sqm Height, h1= 2.2 m
Actual clear
height h2= 2.7 m
h1/h2 = 0.83 say 0.9
KN/Sqm NOTE For the design of cladding or its fixings to a structural member, Class A shoul
applicable to the particular area in which the cladding lies.
For the design of a structural member carrying the cladding, Class B or C should be
the area in which the member lies. In considering the design against high local pres
cladding, the secondary effects such as distribution due to the stiffness of the cladd
0.26 For main structural members the design should be to Class B or C using the normal
0.9
units (kgf/m2 and m/s)
f/ft2 and mile/h).
LOADINGS
Structural DATA
length 6m
Bay Width 5.4 m
LOADING
Dead Loads:
Self Wt of members By Design programm
Air Permeability 0%
Cp +ve (Downward)
all values of Cp = 0.4
Cp -ve (Upward)
when Cp = 1.4
0.9
Downward Force
Downward +ve force on Main Frame 0.0255 KN/m
Upward Force
Upward -ve force on Main Frame 0.089121 KN/m
MAX 1 TO CONSIDER
Min. Clear
KN/Sqm Height, h1= 2.2 m
Actual clear
height h2= 2.7 m
h1/h2 = 0.83 say 0.9
KN/Sqm NOTE For the design of cladding or its fixings to a structural member, Class A shoul
applicable to the particular area in which the cladding lies.
For the design of a structural member carrying the cladding, Class B or C should be
the area in which the member lies. In considering the design against high local pres
cladding, the secondary effects such as distribution due to the stiffness of the cladd
0.26 For main structural members the design should be to Class B or C using the normal
0.9
units (kgf/m2 and m/s)
f/ft2 and mile/h).